Stock exhaust holding you back? Rip it out and let your Spark breathe, roar, and perform the way it should with the Worx Racing Freeflow Exhaust Kit. Designed to ditch that restrictive baffle, this kit boosts throttle response, cuts back pressure, and gives you that deep, aggressive exhaust note you want.

?? NOW WITH RED INTERIOR! Tougher, stronger, and built for max durability and performance.

? More Power, Less Restriction – Better flow means snappier throttle response and reduced back pressure.
? Lightweight & Durable – Moulded silicone hose with red interior for extra strength and longevity.
? OEM Fitment, Race-Ready Sound – Uses the factory exhaust exit location for easy, clean installation.
? Easy Install – Comes with everything you need—just bolt it up and send it.
? Fits 2 & 3-Seater Sparks – Including iBR models.

Rip, roar, and ride harder. Your Spark just got a serious attitude upgrade.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

WORX Racing NEW Sea-Doo 4-tec Intake manifold Girdle kit provides added strength to the Sea-Doo intake manifolds. The Bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the join in the manifold that splits under higher boost pressures on skis with aftermarket superchargers or running higher rpm’s.

Fitment

• Sea-Doo

Want your Spark to sound as good as it rides? Ditch the restrictive stock baffle and let your engine breathe with the Worx Racing Performance Exhaust Kit. More power, better throttle response, and a deep, throaty exhaust note that turns heads. Plus, that billet anodized rear exhaust outlet gives your ski a serious performance look, because fast should look fast.

NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

? More Power, More Noise – Improved exhaust flow for better throttle response across the rev range.
? Lightweight & Durable – Moulded silicone hose with new red interior for extra strength and longevity.
? Performance Look – Billet anodized rear exhaust outlet screams race-ready.
? Easy Install – Comes with all the hardware you need, no headaches, just horsepower.
? Fits 2-Seater Sparks – (DOES NOT FIT 3-SEATER MODELS. For that, check out the WR04008).

Bolt it on. Open it up. Ride harder.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

• Billet Drive coupler for Yamaha 1.8 Engine
• Fits any 1.8 Yamaha Engine
• Billet construction huge strength upgrade over stock cast unit
• Utilises OEM rubber coupler
• A must for any High Horsepower/ Race watercraft

Fitment

• 2008-2020 Yamaha

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Fitment

• 2008-2017 Yamaha

Whether you've just hopped on your spark for the first time or been riding it for years and want to upgrade, this is the perfect tune for you! As one of the easiest upgrades to make, the upgrade process is super straightforward! All you have to do is remove your ECU, send/drop it in to us. We'll upgrade the ECU and send it back the same or next day we receive it!

This popular tune converts both 60Hp and 90Hp Seadoo sparks up to 110Hp!

It also opens up both sport and touring mode on your spark if this isn't something already enabled. During this process, all OEM gauge functions are retained.

For optimal performance, we recommend the following RPM limit tunes for ski conversions:

• For skis upgraded from 60HP to 90HP, a 8050 RPM limit tune is recommended.
• For skis upgraded from 90HP to 110HP, a 8550 RPM limit tune is recommended.

Benefits:

• Increased RPM limit
• Remove Throttle Restrictions
• Fuel Maps Improved
• Upgraded Ignition Timings
  
• Increase to Throttle Control & Reaction

While Worx Racing Components make their best effort to ensure our tune library is up to date, unfortunately due to shifts between models, even within the same year, some skis may differ slightly. In this case Worx will get back to you in a timely manner in the event that the Reflash may take longer than expected or not be able to be completed. 

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please print the below ECU form and send the completed for with your ECU. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.   

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Download Reflash Form/Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Download Reflash Form/Explanation

Fitment

• Sea-Doo

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please wait for an email from our Customer Service Team with details on where to ship your ECU and a form to be sent with it. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.   

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Fitment

• 2001, 2012-2013 Kawasaki

Fitment

• 2014-2020 Yamaha

Fitment

• Sea-Doo

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum air flow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows a extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add a extra 45+HP to your water craft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.

Specifications

• New Anodised core!!!!

  • Huge internal core element for increased air flow and denser air
  • Extremely lower air intake temps over OEM cooler
  • Huge HP gains up to 45+ Horsepower in certain applications
  • Removable bracket, silicone hoses and necessary hardware all INCLUDED for easy install
  • Upright element and water flow for increased heat transfer and efficiency
  • Upright mounting allows water to complete drain from unit after use
  • Blow off Valve INCLUDED in kit to help supercharger reliability and performance
  • Complete Independent Intercooler cooling kit upgrade for lower air temps

Parts Included 

Intercooler core

Blow off valve

Top intercooler hose

Instructions

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

1) WR04043 Air Filter Kit  allows maximum air flow to your engine.

2) WR04001 Ribbon Remover replaces the restrictive mesh element in the intake manifold and  increases air flow to the engine, maximizing horsepower.

3) WR246 Intake Grate enhances stability control, turning capability, hook up and improves handling in rough water conditions.

4) WR0710 Pump Seal kit fits into the voids of your WR246 Intake Grate to reduce cavitation and maximise pump efficiency and performance.

5) YS-CD-13/19 Solas Impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. 

6) WR04033 Pump Strainer to increase water flow into engine and lower engine temps.

7) WR03003 ECU Reflash all OEM functions are retained and you can expect significantly improved acceleration, fuel economy, better top speed and overall maximised performance.  Please note we perform this on your stock ECU and will require you to send this to us. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

8) WR06021 Trim Extension increases trim range to bring the nose of your boat higher and increase speed.

Model Fitment

2015-2017 Yamaha VXR/VXS

Parts Included 

Our  Launch Kit sets the ultimate foundation for any one wanting to upgrade their Superjet. We have all of your handling needs covered. This kit includes:

* Our famous WR228 Intake Grate designed with a deeper scoop for improved hook up and turning for all styles of riding

* Our best selling WR312 Intake Grate  for greater stability, drive and control

* WR544 Sponsons constructed from marine grade aluminum and adjustable to suit your style of riding

* WR04041  Exhaust Sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Model Fitment

Yamaha Superjet 2008-2020

Parts Included

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2014-2016 Yamaha FZR/FZS SVHO

Parts Included 

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

1) WR04043 Air Filter Kit allows maximum air flow to your engine.

2) WR04001 Ribbon Remover replaces the restrictive mesh element in the intake manifold and  increases air flow to the engine, maximizing horsepower.

3) WR240 Intake Grate enhances stability control, turning capability, hook up and improves handling in rough water conditions.

4) WR0704 Pump Seal kit fits into the voids of your WR240 Intake Grate to reduce cavitation and maximise pump efficiency and performance.

5) YS-CD-13/19 Solas Impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. 

6) WR04033 Pump Strainer to increase water flow into engine and lower engine temps.

7) WR03003 ECU Reflash all OEM functions are retained and you can expect significantly improved acceleration, fuel economy, better top speed and overall maximised performance.  Please note we perform this on your stock ECU and will require you to send this to us. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.

Model Fitment

2011-2014 Yamaha VXR/VXS

Parts Included 

Get the party started with our Launch Kit! This combination of parts is the ideal platform for kicking off your modifications and can be easily added to over time to further upgrade your jetski. Designed to extract the best possible potential from your standard watercraft , this level of kit includes parts that any mechanically minded individual should be able to install.

Model Fitment

2012-2017 Yamaha FX HO

Parts Included 

The ultimate upgrade for watercraft enthusiasts seeking enhanced performance and personalized style on the waves. Our sponsons inserts are crafted with precision and engineered for top-notch performance, giving you the edge you need in water sports.

Link for Stickers

1. Vibrant Color Options: Choose from seven exciting colors to match your personal style and make a bold statement on the water. Whether you prefer a sleek black, a vibrant red, or a cool blue, our sponson inserts let you stand out from the crowd.

2. Customization: Personalize your watercraft with WORX Racing Components Sponson Inserts and make it uniquely yours. With multiple color options, you have the flexibility to create a look that complements your individual taste.

3. Easy Installation: Upgrading your watercraft has never been easier. To install the sponson inserts, simply remove your current inserts and replace them with WORX Racing Components. We recommend using a soft mallet and padding during installation to ensure a secure fit while protecting the rest of the sponson.

4. Stickers for Extra Flair: Take your customization to the next level with our exclusive sponson stickers. Visit our website here to explore a range of eye-catching designs that add a touch of personality to your watercraft.

Upgrade your watercraft with WORX Racing Components Sponson Inserts and experience the thrill of enhanced performance and personalized style on the water. Join the wave of enthusiasts who trust WORX for top-quality racing components that deliver on both performance and aesthetics.

While we at WORX Racing Components take pride in designing and manufacturing high-quality products, we must emphasize that the installation of our Sponson Inserts should be undertaken at the user's own discretion. Improper installation may lead to performance issues or damage to your watercraft.

WORX Racing Components will not be held liable for any consequences arising from incorrect installation, including but not limited to damage to the product, the watercraft, or any personal injury. If in doubt, we strongly advise seeking professional assistance or consulting with a qualified technician.

By choosing to install WORX Racing Components Sponson Inserts, you acknowledge and accept the responsibility for the installation process. We appreciate your understanding and wish you a thrilling and safe experience with our products.

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a universal fit for 6" pod filters.

Comfortably fits all Worx Aftermarket Air filters excluding sparks.
For Seadoo Sparks, use WR-PF-4

Fitment

• Sea-Doo

Want that extra level of protection? 

Worx Racing Pre-Filter wraps are designed to give you that extra peace of mind when it comes to your Air Filter. Designed to keep your Air Filter dry through extreme rides, while still ensuring maximum air flow to your ski.

Perfectly fits our Seadoo Spark Air Filter Upgrade! 

Made from a durable, water repellent polyester material, these pre-filters guarantee extra life for your air filter and ski and provide a perfect fit for your Worx Seadoo Spark Air Filter!

Fitment

• Sea-Doo
• Sea-Doo Spark

Solas Sea-Doo 'SXX' Concord 14/19 Impeller

This Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 325 HP models. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation. Impeller removal tool sold separately.

For use in craft equipped with a 161mm diameter wear ring.

Fitment

• Sea-Doo

Solas Sea-Doo Concord SX4-CD-13/16

Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Fitment

• Sea-Doo

Want to upgrade your spark to better suit your riding style? The Worx Seadoo Spark Steering systems are perfect for any rider that wants to up their setup! Whether you've got a fresh new set of bars you want to put on, or you want to get the whole setup, Worx has got you covered!

• All setups retain OEM functions

• Improved ergonomics provide a more comfortable ride with less wrist strain

• Adjustable throttle/reverse housing and handlebar position

• Stems constructed from superior grade anodised billet aluminium for increased strength and durability over the failure-prone plastic OEM unit

• Allows for high quality aftermarket 7/8" (22mm) handlebar installation

Instructions

Fitment

• 2012-2017 Sea-Doo
• 2012-2017 Sea-Doo RXPX

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller.

Fitment

• Yamaha

The new Solas Concord YX-CD-12/17 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.

Designed for modified Yamaha EXR & JetBlaster applications with the 1,050cc TR-1 engine, the YX-CD-12/17 is featured in our Stage 1 Kits for Yamaha EXR & Yamaha JetBlaster models.

Fitment

• Yamaha

Fitment

• Yamaha

Solas SK-HS-140 Replacement Wear Ring for the Sea Doo Spark Replaces OEM Wear Ring 267000813

100% Stainless Steel - More durable than OEM

Specifically designed for the Seadoo Spark to be an OEM Replacement Wear Ring

For All Seadoo Spark

Instructions

Instructions

Fitment

• Sea-Doo
• Sea-Doo Spark

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The new Solas Concord SK-CD-12/14 is the recomended impeller for any Spark using any of the WORX/ RIVA/V-Tech aftermarket tunes. The new Solas 12/14 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.

Solas SK-HS-140 Replacement Wear Ring for the Sea Doo Spark Replaces OEM Wear Ring.100% Stainless Steel - More durable than OEM. 

Also includes a bonus impeller removal tool!

Includes:

• SK-CD-12/14
  
• SK-HS-140
• WR001

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

The 140/75mm Seadoo Spark Race Pump delivers increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed the limits of the original pump efficiency.

Featuring computer designed 140/75mm 12-vein stator section that is far more efficient than stock pump. The high grade stainless steel construction provides superior strength and improved corrosion resistance. This unit utilizes OEM bearings, seals and driveshaft.

(HSV+Nozzle) 14 VANE  
Diameter = 161mm
Hub size = 83mm

Model Fitment

Seadoo Spark 2014+

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Includes:

• SXX-CD-13/18
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Also includes bonus Impeller tool!

Includes:

• SXX-CD-13/16
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

These removal tools are required when removing the impeller from the shaft on Seadoo models.

Fits all Seadoo models with 215 255 260 300 Engines 2004+

Fitment

• Sea-Doo

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring 

100% Stainless Steel - More durable than OEM

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring

Fits all 300HP Model Seadoo Skis

Fitment

• Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2015 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YS-CD-13/19 Solas Prop
• YFS-HS-155 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX HO, SHO, VXR, VXS

The Solas 12-Vane Stainless Steel Pump is a direct bolt-on performance upgrade. The one-piece investment cast stainless steel pump offers improved bottom-end acceleration, improved hook-up, and up to 2 mph top speed gain over OEM pump. Kit comes complete with bearings, seals, shaft, pump cone, reduction nozzle and steering nozzle.

For use in craft equipped with a 148mm diameter wear ring.

Fitment

• Kawasaki

Enhance the performance of your Kawasaki watercraft with the Solas KR-CD-14/21 Kawasaki Impeller. Engineered to deliver exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for Kawasaki enthusiasts looking to elevate their riding experience and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 14/21 pitch and innovative blade geometry ensure superior acceleration and increased top-end speed, optimizing your Kawasaki’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand the harshest marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Kawasaki Models: Specifically designed to fit a wide range of Kawasaki watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: The optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions.

For installation you will require Solas Spline Tool WR001.

Suits Following Models:

2014+ ULTRA 310X/310X SE/310LX/310R

2011 - 2013 ULTRA 300X / 300LX

Fitment

• 2011-2015 Kawasaki

Fitment

• Kawasaki

Elevate your Yamaha watercraft’s performance with the Solas YJ-CD-12/17 Concord Yamaha Impeller. Engineered to deliver exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for Yamaha enthusiasts seeking to enhance their riding experience and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 12/17 pitch and innovative blade geometry deliver superior acceleration and increased top-end speed, optimizing your Yamaha’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand harsh marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Yamaha Models: Specifically designed to fit a wide range of Yamaha watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: The optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions

?? You will require the WR001 Solas Spline Tool for Installation

Suits Following Models:

2021+ Superjet 

2017+ EX / EX Deluxe / EX Sport / EX Limited

Fitment

• 2017-2020 Yamaha

Larger blade are and better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impeller.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YV-CD-13/20 Solas Prop
• YVS-HS-160 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX SVHO, FZR, FZS, GP1800

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YV-CD-13/18 Solas Prop
• YVS-HS-160 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX SVHO, FZR, FZS, GP1800

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The larger blade area and better hub design of the Solas Impeller make for maximum performance. Pitched for more acceleration, top speed and RPM. This new prop easily out performs your OEM impeller.

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. 

Includes:
• YS-CD-13/22 Solas Prop
• YFS-HS-155 Solas Liner
• WR014H Solas Yamaha Tool

Fitment

• Yamaha
• Yamaha FX HO, SHO, VXR, VXS

These Solas Yamaha Waverunner impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. The Solas Yamaha impellers pro design are made of stainless steel.

Fits 2008+ FZR Sho and FZS and 2008+ FX SHO and FX SHO Cruiser 

Fitment

• 2009-2020 Yamaha
• 2009-2020 Yamaha FX HO, SHO, VXR, VXS

Fitment

• 2009-2021, 2023 Yamaha
• 2009-2021, 2023 Yamaha FX HO, SHO, VXR, VXS

Larger blade are better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impellor. A must for Reflashed skis.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800

Elevate your Yamaha watercraft’s performance with the Solas YH-CD-18/22 Yamaha Impeller. Designed for exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for riders seeking to optimize their watercraft’s capabilities and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 18/22 pitch and innovative blade geometry deliver superior acceleration and increased top-end speed, maximizing your Yamaha’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand harsh marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Yamaha Models: Specifically designed to fit a wide range of Yamaha watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: Optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions.

Suits Following Models:

2005 - 2015 VX / VX Sport / VX Deluxe / VX Crusier

2015 V1 / V1 Sport

?? You will require the WR001 Solas Spline Tool for Installation

Fitment

• 2014-2020 Yamaha

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

Seadoo Spark

Parts Included 

Meet the first ever Dual Rear Exhaust Kit for the Sea-Doo Spark. Built for riders who want performance, style, and a soundtrack that turns heads.

Our high-performance silicone hose, gives you unbeatable durability, heat resistance, and a perfect fit, without the extra drone that can accompany Aluminium piped exhausts. This setup removes the restrictive OEM sound box, unlocking sharper throttle response, better flow, and pure riding satisfaction.

And the sound? Let’s just say it is louder than your nana’s snoring, so if you are not into making noise, this is not for you. But if you want your Spark to growl like it means business, you have just found your upgrade.

Features and Benefits:

• First ever dual rear exhaust designed specifically for the Sea-Doo Spark

• High-performance silicone couplers for flexibility, heat resistance, and long-lasting durability

• Removes OEM sound box to reduce back pressure and improve throttle response

• Deep, aggressive exhaust note that commands attention on the water

• Precision fitment with all hardware included for easy installation

• Stylish dual outlet design to give your Spark a race-ready look

Easy to install. Built to last. Guaranteed to make waves.

Warning: May cause excessive grinning and neighbour complaints.

Fitment

• Sea-Doo
• Sea-Doo Spark

Take your upgrade all the way with our complete 34-piece hull washer kit, replacing every stock plastic washer on your Sea-Doo Spark with premium stainless steel.

This full-kit option provides maximum durability, saltwater protection, and a fully colour-matched finish — front to back.

Features:
• Full replacement kit – 34 pieces to upgrade every hull washer
• Made from corrosion-resistant 316 stainless steel
• Available in multiple anodised colours to suit your ride
• Engineered for a perfect fit – no cutting, no fuss
• Ideal for high-performance use and long-term reliability

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Replace brittle, ageing plastic with serious strength and style.
This 21-piece kit is crafted from 316 marine-grade stainless steel and designed to replace the centre motor section washers on your Sea-Doo Spark.

Tough enough for saltwater, built to last — and available in a range of anodised colours to match your personal style or ski setup.

Features:
• Replaces all washers in the centre motor section
• 316 marine-grade stainless steel for ultimate durability
• Anodised in a variety of colour options
• Precision fit – no mods or drilling required
• Clean, corrosion-resistant finish for a professional look

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Have you ever gone to screw the top deck back onto your Spark and felt the mount start spinning in the hull instead of tightening up? We have. That is exactly why we created our Spark billet body mounts, designed specifically for Sea Doo Spark models. They replace the soft plastic stock mounts that strip out and ruin your day on the water.

These mounts are CNC machined from billet aluminum to give you a solid, long lasting connection where it matters most. The factory plastic mounts can flex, crack, and lose their thread after only a few removals. Our billet design stays true, holds tight, and is made for repeated deck removal and maintenance. Paired with stainless steel hardware, they are built to handle real world riding and workshop abuse.

Grab a set before your next service, so you do not get caught out with a spinning stock mount while you are trying to put the ski back together. Skip replacing plastic with more plastic and do it right the first time.

Fitment

• Sea-Doo
• Sea-Doo Spark

SOLAS STAINLES STEEL WEAR RING SRX-HS-159-002

FITS THE 159MM SEADOO PUMP

REPLACES OEM WEAR RING 267000372

Fitment

• Sea-Doo

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• Purpose designed hull mounting bracket that fits to hull with no drilling required

Seadoo Air Filters can be a little confusing. Please feel free to email us or phone if you would like further clarification, we would love to help!

Fitment

• 2008-2015 Sea-Doo
• 2008-2015 Sea-Doo RXTX, 4-TEC

Take your Sea-Doo to the next level with aggressive sound and performance.

? 2.5" Billet Exhaust Outlet – Precision-machined and anodised for durability and style
? Moulded Silicone Hose – Designed to eliminate resonance for a deep, throaty exhaust note
? OEM Block-Off Plug Included – Comes complete with standard outlet block-off
? Deletes Restrictive Baffles – Frees up your exhaust flow for improved performance
? Built for Power – Perfect for both recreational riders and racers alike
? Fitment – Suits Sea-Doo RXPX 300 and GTR 230 (2017+)

?? Note: For all other Sea-Doo 4Tec models (non-300), we recommend the WR04013 Exhaust Kit instead.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, and specifically designed silicon hose. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Silicon 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull with no drilling

Instructions

Fitment

• 2020 Sea-Doo
• 2020 Sea-Doo RXPX

Fitment

• 2000-2002 Sea-Doo

Complete black anodised billet construction to increase durability and prevent against corrosion. 

Specifically designed to create even pressure in the reduction nozzle to reduce pump cavitation at RPM increase. Increases acceleration, drive and top speed.

Suits all new '3 bolt' Seadoo Style Pumps. 

Does not suit Seadoo Spark.

Fitment

• Sea-Doo