BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS. 

Fitment:

All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors

Description 

Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.

Description 

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Description 

Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.

BRASS FITTINGS NOT INCLUDED.

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for any kind of head and block combination. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

CP Carrillo forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

SOLD AS A SET!

Carrillo Heavy-Duty connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

Carrillo connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

This vacuum adapter kit allows you to easily connect vacuum reference lines for performance accessories such as blow off valve kits, boost gauges and rising rate fuel pressure regulators. This adapter directly screws into the factory intake manifold, eliminating any need for drilling or modifying the intake manifold or other methods like splicing into the MAP sensor signal. This kit includes two 1/4” barbed fittings and one 1/8" barbed fitting to fit a variety of accessories. It also includes 2 block-off plugs in case any ports go unused.