Your Bimini Top shields you, so take steps to keep it in shape with the Bimini Roof Front Sleeve, which protects your Bimini Top. This accessory ensures your Bimini Top is well protected when it’s closed, in storage or trailering. It’s built from a high-grade UV- and water-resistant marine canvas for maximum protection and, best of all, it is easy to install all by yourself. Requires a Bimini Top or Double Bimini Top.Sleek, modern storage design protect your Switch front Bimini Top.Perfect during storage, trailering or cruising with the Bimini closed.UV water-resistant high-grade marine canvas construction.Easy one-person installation.Requires Bimini Top or Double Bimini Top.Requires 295101136 and 295101137 for full protectionof a Double Bimini Top.SpecificationsCalifornia Prop 65WarningInstallation Instructions295101136 Installation Instructions

BMS has designed the strongest and lightest billet aluminum flywheel for the Kawasaki 1100 2-stroke engine.  It has been proven year over year with the best racers around the world.  Top engine builder Tim Judge of Judge Motorsports only uses this flywheel for his engine builds.  No other flywheel on the market can withstand the abuse!

This flywheel includes the pick up gear for the MoTec ignition system.  It also is completely balanced to eliminate any vibration or unnecessary bearing wear.

BMS has designed the strongest and lightest billet aluminum flywheel for the Kawasaki 1100 2 stroke engine.  It has been tested and proven year over year with the best racers around the world.  Top engine builder Tim Judge from Judge Motorsports only uses this flywheel for his engine builds.  No other flywheel on the market can withstand the abuse!

This flywheel includes the necessary magnet to run the MSD ignition system.  It is completely balanced to eliminate any vibration or unnecessary bearing wear.

Unlock the full potential of your watercraft with our ECU Reprogramming Service.

Flash tuning is a process where your watercraft ECU can be re-programmed, to obtain the full potential of your watercraft engine.

Upgraded tuning parameters:

• Increase Horsepower by improved fuel and timing maps
• No engine internal modifications required
• Improve throttle response
• Enhance efficiency through all RPM
• Increase rev limiters
• Increase torque through entire powerband
• Improve throttle control & reaction
• Increase top speed
• For 93 octane pump fuel

Please specify your modifications and performance goals. 

PLEASE NOTE: This is an ECU reflash service performed on your stock ECU.

Once you place your order please wait for an email from our C.M.S Customer Service Team with details on where to ship your ECU and a form to be sent with it.

C.M.S. will perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service. 

Tired of damaging your pump shaft every time you put it in a vice to remove your prop?  Those days are over!  We have designed the most advanced tool for holding your impeller shaft in a vice while breaking that hard to remove impeller!

Description:

Our BMS Racing Waterbox delivers increased horsepower and performance by reducing exhaust restriction and back pressure. The short design allows easy servicing of supercharger without removal of exhaust system. High-strength aluminum construction & precision welds will withstand backfires & overheating. Anodized to prevent corrosion.

Key Features:

• Will deliver up to 10hp on modified watercraft
• Ribbed tube flanges for reliable coupler retention.
• Radiused exhaust tubes & end caps.
• Anodized grey to prevent corrosion.
• Fits all Sea-Doo 2020+ models with 1630 engine.

Fits:

2022 SEA-DOO WAKE PRO 230
2022 SEA-DOO RXT-X 300
2022 SEA-DOO RXP-X 300
2022 SEA-DOO GTX 300
2022 SEA-DOO GTX 230
2022 SEA-DOO GTR 230
2022 SEA-DOO GTI SE 170
2022 SEA-DOO GTI SE 130
2022 SEA-DOO GTI 130
2021 SEA-DOO WAKE PRO 230
2021 SEA-DOO RXT-X 300
2021 SEA-DOO RXP-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2021 SEA-DOO GTX 230
2021 SEA-DOO GTR 230
2021 SEA-DOO GTI SE 170
2021 SEA-DOO GTI SE 130
2021 SEA-DOO GTI 130
2020 SEA-DOO WAKE PRO 230
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2020 SEA-DOO GTX LIMITED 230
2020 SEA-DOO GTX 230
2020 SEA-DOO GTX 170
2020 SEA-DOO GTR 230
2020 SEA-DOO GTI SE 170
2020 SEA-DOO GTI SE 130 (IBR)
2020 SEA-DOO GTI 130 (IBR)

Description:

Our BMS Racing Waterbox delivers increased horsepower and performance by reducing exhaust restriction and back pressure. This Waterbox will increase the low-end power and mid-range pull on your Yamaha 1.8L watercraft. High-strength aluminum construction will survive backfires and meltdowns. Powder coated to prevent corrosion. This is must for and modified 1.8L engine.

Features:

• Increased horsepower on modified 1.8L watercraft!
• Domed end caps
• Ribbed tube flanges for reliable coupler retention.
• Powder coasted top prevent corrosion
• Increase in HP on modified engines with significant torque gains as well

FITS:

All Yamaha 1.8L SVHO, SHO, and HO model skis. 

BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS. 

Fitment:

All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors

PLEASE NOTE: This is an ECU reflash service performed on your stock ECU.

Once you place your order please wait for an email from our C.M.S Customer Service Team with details on where to ship your ECU and a form to be sent with it.

C.M.S. will perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service. 

Unlock the full potential of your watercraft with our ECU Reprogramming Service.

Flash tuning is a process where your watercraft ECU can be re-programmed, to obtain the full potential of your watercraft engine.

Upgraded tuning parameters:

• Increase Horsepower by improved fuel and timing maps
• No engine internal modifications required
• Improve throttle response
• Enhance efficiency through all RPM
• Increase rev limiters
• Increase torque through entire powerband
• Improve throttle control & reaction
• Increase top speed
• For 93 octane pump fuel

Please specify your modifications and performance goals. 

PLEASE NOTE: This is an ECU reflash service performed on your stock ECU.

Once you place your order please wait for an email from our C.M.S Customer Service Team with details on where to ship your ECU and a form to be sent with it.

C.M.S. will perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service. 

Get on and off your personal watercraft with ease — all you need is this retractable Boarding Ladder that bridges you between land and sea. It's a spring-loaded platform that stays in the upright position, and its direct bolt-on installation makes it easy to set-up and seamlessly integrate with the ride.Retractable boarding step designed for your watercraft.Makes boarding from the water much easier.Spring-loaded platform that stays in the ''up'' position.Direct bolt-on installation, thanks to integrated mounting points on the watercraft.SpecificationsCalifornia Prop 65WarningInstallation Instructions295100869 Installation Instructions

Retractable boarding step designed for your watercraft.
Makes boarding from the water much easier.
Spring-loaded platform that stays in the ''up'' position.
Direct bolt-on installation, thanks to integrated mounting points on the watercraft.

Fits on:

RXT, RXT-X, GTX and WAKE PRO (2018 and up) / GTI, GTI SE, GTR and WAKE 170 (2020 and up) / RXP-X (2021)

Boarding and alighting a personal watercraft can be tricky, especially on choppy waters. This Boarding Step makes it a breeze. It fits right on the side of your SPARK and can support up to 250 lb. Best of all, its knee-friendly design makes bumps and scratches a thing of the past with its gentle surface.Convenient step with knee-friendly surface.Installs easily on the right side of a SPARK and can hold up to 250 lb (113 kg).Easily mounts on the transom and can be installed by any authorized Sea-Doo dealer in minutes.SpecificationsCalifornia Prop 65WarningInstallation Instructions295100642 Installation Instructions

Aluminum boat and Pontoon Cleaner is formulated to quickly and safely remove marine contaminants from painted and unpainted aluminum surfaces on pontoons and boats. It removes waterline scum, algae stains, mold and oxidation to restore a stunning clean finish to aluminum with no whitening. Won’t harm the metal.HOW TO USETreat one section at a time. Spray product directly on hull and allow 1 to 2 minutes to work, then scrub with a brush. Immediately rinse thoroughly with water, ideally with a pressure washer.RECOMMENDATIONSNever use on hot or warm surfaces. Always test for compatibility on hidden area before applying to the entire surface. Do not allow product to dry on any surface. Always wear gloves and protective eyewear when using this product.HOT TIPSFor best results, use pressure washer to remove loosen debris before applying product.When it comes to long-lasting & tough stains, use the XPS Eco-friendly Hull Cleaner as a shock treatment.For painted and unpainted aluminumRemoves quickly and safely marine contaminants from surfacesRestores a stunning clean finish to aluminum33 fl. oz. / 946 mlOther format available : 2 QT / 1.89 L (779307)

• Vent Valve Cover Breather Filter
• Performance: improves up to 95% filtration efficiency.

Description:

Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.

By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.

Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxiliary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the spark plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.

Note: Solid tip plug. For use with Sea-Doo 300 Models

With the release of the Kawasaki 1500 SX-R and the engine modifications required to compete in the top standup racing class. One of the first changes to the engine is rods and pistons. It was very clear that the changing and installation of the pistons was extremely complicated, Sam Nehme of Broward Motorsports has developed this amazing tool that will allow installation of all four pistons at one time. No more damaged rings and oil ring. This tool will work on all Kawasaki STX-12F/ STX-15F/ Ultra 250XI/ 1500SX-R

This kit now also comes with an extra set of piston pin and piston skirt alignment rods to assist with most aftermarket pistons as well

BMS Racing 6" stickers. 

Stickers are 6" long x 2" high

Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit.  Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.

-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry

- 4-Ply silicone hose

-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.

-Get greater reliability by reducing wear to your clutch and engine components.

-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.

NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020

This fully integrated Bluetooth system boasts two high-performance 6" speakers and an amp that pumps out 100 watts of crystal-clear sound. Positioned strategically at the front and rear of the console, the speakers envelop you in a surround sound-like experience. The console-mounted control pad ensures effortless access to your music. Built to endure the elements, this system is fully watertight, corrosion-resistant, and ready to tackle any outdoor adventure, even in saltwater conditions. Elevate your pontoon experience with the Sea-Doo BRP Audio System.Fully integrated Bluetooth audio system.Two high-performance 6" speakers and amp deliver 100 watts of crisp, clear audio.Speakers located at front and rear of console for surround sound-like coverage.Console-mounted control pad for easy access.Fully watertight and corrosion resistant, built to withstand harsh outdoor conditions and saltwater.SpecificationsCalifornia Prop 65WarningInstallation Instructions295101275 Installation Instructions

Before you even think about installing your portable audio system, you’re going to need this BRP Audio-Portable System Support Base. This accessory is specifically designed to hold your sound system securely in place so you can cruise across the water and listen to your favorite tunes without worrying about anything loosening and falling into the water.Required to install the BRP Audio-Portable System (295101042).SpecificationsCalifornia Prop 65WarningInstallation Instructions295101051 Installation Instructions

Features

Dive into unparalleled sound quality with four 6.5’’ JL Audio speakers, a 10’’ subwoofer, and two powerful amplifiers - all finely tuned by JL Audio for a premium listening experience. Whether cruising at speed or relaxing at anchor, immerse yourself in rich bass and crystal-clear audio. Control the mood with Bluetooth-operated RGB LED lighting for a full sensory experience. Crafted with marine-grade materials for durability and resistance to the elements, this audio system seamlessly integrates into your corner tables, offering convenience with cup holders and USB ports. For the ultimate setup, pair with the High Capacity Battery Holder and Harness Kit. Make waves with the Sea-Doo BRP Switch Premium Audio System – your pontoon's new best friend.Includes four 6.5’’ speakers, 10’’ subwoofer and two amplifiers calibrated by JL Audio.Must order both sku's (295100967 & 295101013) for a complete kit.High-performance 6.5’’ JL Audio speakers feature a long-throw woofer design and excellent power handling for amazing sound at speed, or lounging at rest.The 10’’ JL Audio subwoofer with long-throw capability delivers tremendously rich bass performance with complete clarity from compact, shallow-depth enclosure.Two JL Audio amplifiers deliver very clean, high power output to drive speakers and subwoofer.Complete audio-visual experience with Bluetooth controlled RGB LED lighting.Built within Switch corner tables for a seamless integration and provides multi-function with cup holders and USB ports.Reliable and durable marine-grade construction, all components are resistant to corrosion and elements.Addition of High Capacity Battery Holder and Harness Kit (295100966) highly recommended.BRP Audio system (295100992) required for installation.Right side includes two 6.5’’ speakers with 10’’ subwoofer, two amplifiers and harnessLeft side includes two 6.5’’ speakersSpecificationsCalifornia Prop 65WarningInstallation Instructions295100967 Installation Instructions

Introducing the C-Type Hitch, a robust addition to your body frame that embodies strength and reliability. Crafted for those who demand performance, this heavy-duty hitch seamlessly integrates with your hitch rear bumper, providing a solid connection for all your towing needs. Whether you're hauling gear for an epic snowmobile adventure or transporting your equipment, the C-Type Hitch stands up to the challenge. Its durable construction ensures it can handle the rigors of the trails, making it a trusted companion for every brave enthusiast ready to conquer the winter landscape.Heavy-duty C-type hitch works in conjunction with hitch rear bumper.SpecificationsCalifornia Prop 65WarningInstallation Instructions860201381 Installation Instructions

Description:

Add full protection from weather, bugs and other elements. Full field of view when in use is unmatched in the marine industry. Next-level innovation offers exceptional ease of use. Labelled installation sections eliminates guesswork during assembly. Bug netting defends against insects while allowing air flow. Under-roof pockets cleverly store canvas and panels when not in use. Zippered closure system. Railing clip system provides effortless installation without the use of hard snaps. Requires the Double Bimini Top (295100823) for installation (sold separately). Light Pole Extension (295101048) required when riding at sunrise or sunset, or when visibility is reduced.

Fits On: Switch Sport 18, Switch Cruise 18

A Sea-Doo Switch Camper enclosure takes your boating adventures to the next level! Designed to provide full protection from the elements, bugs and other elements, this camper top is a game-changer. One of the standout features of this 18-foot camper cover is its unmatched full field of view. Whether you're enjoying the scenic views or keeping an eye on your surroundings, you can do so with clarity. With an intuitive, quick setup, you'll have your Boat camper top up and ready in no time. Enjoy your adventures to the fullest, knowing that you have full coverage and peace of mind on the water.Add full protection from weather, bugs and other elements.Full field of view when in use is unmatched in the marine industry.Next-level innovation offers exceptional ease of use.Labelled installation sections eliminates guesswork during assembly.Bug netting defends against insects while allowing air flow.Under-roof pockets cleverly store canvas and panels when not in use.Zippered closure system.Railing clip system provides effortless installation without the use of hard snaps.Requires the Double Bimini Top (295100823) for installation (sold separately).Light Pole Extension (295101048) required when riding at sunrise or sunset, or when visibility is reduced.SpecificationsCalifornia Prop 65WarningInstallation Instructions295100963 Installation Instructions

Description:

Add full protection from weather, bugs and other elements. Full field of view when in use is unmatched in the marine industry. Next-level innovation offers exceptional ease of use. Labelled installation sections eliminates guesswork during assembly. Bug netting defends against insects while allowing air flow. Under-roof pockets cleverly store canvas and panels when not in use. Dual magnetic and zippered closure system keeps door closed even when unzipped. Railing clip system provides effortless installation without the use of hard snaps. Requires the Double Bimini Top (295100962) for installation (sold separately).

Fits On: Switch Sport 21, Switch Cruise 21

Discover the ultimate solution for outdoor living on the water with the Sea-Doo Switch Camper Enclosure. It provides full protection from weather, bugs, and other elements, helps you extend your boating season and enjoy nature's beauty without compromise. One of the standout features of this 21-foot camper cover is its unmatched field of view: immerse yourself in the surroundings while staying comfortably sheltered. Setup is a breeze, too: with clear instructions and a user-friendly design, effortlessly transform your boat into a cozy retreat in no time thanks to a Boat Camper Top.Add full protection from weather, bugs and other elements.Full field of view when in use is unmatched in the marine industry.Next-level innovation offers exceptional ease of use.Labelled installation sections eliminates guesswork during assembly.Bug netting defends against insects while allowing air flow.Under-roof pockets cleverly store canvas and panels when not in use.Dual magnetic and zippered closure system keeps door closed even when unzipped.Railing clip system provides effortless installation without the use of hard snaps.Requires the Double Bimini Top (295100962) for installation (sold separately).SpecificationsCalifornia Prop 65WarningInstallation Instructions295101004 Installation Instructions

Please read the specifications below. If more information is required, please contact your local dealer.Not Found

Crafted from heavy-duty UV-resistant polyester canvas, this weather-resistant cover protects your driver seat while adding a touch of style. With two vents for breathability and a strategically placed logo for easy installation indicating the backrest top position, this cover is a perfect fit for your seat with armrests. So set sail with peace of mind, knowing your seat is safeguarded on your nautical adventures.Weather-resistant cover protects your driver seat during storage and transportation.Made of heavy-duty UV-resistant solution-dyed polyester canvas with 2 vents.A logo indicates backrest top position for ease of installation.A perfect fit for your driver seat with armrests.SpecificationsCalifornia Prop 65WarningInstallation Instructions295101194 Installation Instructions

Crafted from heavy-duty UV-resistant polyester canvas, this weather-resistant cover shields your driver seat from the elements during storage and travel. Sporting 2 vents for breathability and a logo indicating the backrest top position, it ensures a perfect fit for your seat without armrests. Keep your seat looking new and ready for action with this essential accessory. Trust the Sea-Doo quality for ultimate protection on your aquatic journeys!Weather-resistant cover protects your driver seat during storage and transportation.Made of heavy-duty UV-resistant solution-dyed polyester canvas with 2 vents.A logo indicates backrest top position for ease of installation.A perfect fit for your driver seat without armrestsSpecificationsCalifornia Prop 65WarningInstallation Instructions295101250 Installation Instructions

Carrillo Heavy-Duty connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

Carrillo connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for any kind of head and block combination. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

Engineered for the daring riders, this seat is your gateway to extended ride enjoyment. With a larger sitting surface for improved weight distribution and stability in choppy waters, you'll ride in style and comfort. Crafted with soft foam, it dares you to feel comfier than ever before. Make rough rides a thing of the past with this direct replacement for your standard seat. Don't just ride, ride with comfort and style with Sea-Doo.Seat specially designed to increase riding comfort on extended rides.Features a formed and larger sitting surface for better weight spread and stability in rough water.Constructed with soft foam.Direct replacement of the standard seat.SpecificationsCalifornia Prop 65WarningInstallation Instructions295100893 Installation Instructions

Crafted from heavy-duty UV-resistant polyester canvas, this weather-resistant cover ensures your console is shielded during storage and transit. The soft inner lining prevents abrasions, while the vibrant yellow fabric cleverly indicates handlebar position. With zippered openings for convenient access to storage, this cover offers a perfect fit for your console, whether a Garmin GPS is installed or not. Gear up and protect your console in style with Sea-Doo. Fits on all Switch models.Weather-resistant cover protects your console during storage and transportation.Made of heavy-duty UV-resistant solution-dyed polyester canvas.Soft inner lining prevents panel abrasion.Yellow fabric indicates handlebar position.Zippered openings allow easy access to the small storage.Perfect fit for your console, with or without installed Garmin GPS.SpecificationsCalifornia Prop 65WarningInstallation Instructions295101195 Installation Instructions

Crafted with a 25mm thick pad, this corner sun pad provides unparalleled comfort akin to a cozy seat. Its water-resistant, top-quality material ensures it stays dry and resists fading, stains, and mildew. Easy to maintain, this pad is secured with plastic hooks over-molded with polyurethane for effortless installation and removal. With a customizable layout using the Switch tile system, create your ideal lounging area.Provides the perfect place for relaxing in the sun with friends.25mm pad thickness offers seat-like comfort.Water-resistant material won't absorb water.Durable, high-quality material is easy to maintain and resists fading, stains, mildew, as well as wear and tear.Secured in place with plastic hooks, over-molded with polyurethane material for easy install and removal.Customizable configuration with the Switch tile system.Sold individually.SpecificationsDetailed Fits onSwitch, Switch Cruise, Switch SportCalifornia Prop 65Warning

Introducing the Sea-Doo Coupler Hose, the essential utility equipment for watercraft enthusiasts who demand only the best. Designed to seamlessly integrate with most watercraft models featuring a “T” fitting, this coupler hose ensures a reliable connection for optimal performance. Whether you're using the flush adapter on the ride shoe water outlet or tackling the waves, this hose provides the durability and flexibility you need. Crafted for spontaneity and adventure, the Sea-Doo Coupler Hose is your trusty companion for every aquatic escapade. Dive into your next journey with confidence!For most watercraft models that already have a “T” fitting.Also for watercraft models that use the flush adapter on the ride shoe water outlet.

This essential accessory prevents your coupler from hitting the ground when your trailer is not hitched to a vehicle. No more worries about damage! Easy to install with included hardware and standard on some models, this Coupler Stand is a must-have for every Sea-Doo enthusiast's gear collection. Keep your equipment safe and in top condition with this practical and reliable Sea-Doo product.Prevents coupler from hitting the ground when trailer is not hitched to a vehicle.Includes hardware necessary for installation.Standard on some models.SpecificationsCalifornia Prop 65Warning

Protect your Sea-Doo with our custom-fit personal watercraft cover for RXT, RXT-X, GTX, and Wake Pro models with Touring Windshield. Crafted from UV-resistant polyester canvas, it's designed for durability during storage and trailering. Our Sea-Doo cover features easy-access zippered openings, air release vent system for trailering, and a soft lining to prevent abrasion—so you can preserve the fun for years to come!Weather-resistant trailering cover protects your watercraft during storage and trailering.Made of heavy-duty UV-resistant solution-dyed polyester canvas.Soft inner lining prevents panel abrasion.Yellow fabric indicates handle insertion points.Zippered openings allow easy access to mooring cleats.Zippered opening permits easy access to the glove box, front storage and for refueling.Zippered opening accommodates LinQ accessories on the rear deck with the cover in place.Patented air release vent system for trailering.Side hooks secure the cover while trailering.Compatible with Touring Windshield (295101017) and any Garmin GPS.SpecificationsColor accessoriesBlack

CP Carrillo forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

SOLD AS A SET!

Description:

CP forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

Key Features Include:

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

Fits:

2021 SEA-DOO RXT-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2019 SEA-DOO RXT-X 300
2019 SEA-DOO RXP-X 300
2019 SEA-DOO GTX LIMITED 300
2018 SEA-DOO RXT-X 300
2018 SEA-DOO RXP-X 300
2018 SEA-DOO GTX LIMITED 300
2017 SEA-DOO RXT-X 300
2017 SEA-DOO RXP-X 300
2017 SEA-DOO GTX LIMITED 300
2016 SEA-DOO RXT-X 300
2016 SEA-DOO RXP-X 300
2016 SEA-DOO GTX LIMITED 300