This Yamaha Trim extension has been specifically designed to address the trim issue faced with newer Yamaha models. This trim extension provides a quick and easy solution to the lack of trim range found with OEM parts.

Designed to increase trim range, this cost effective upgrade will bring the nose of your ski higher, reducing surface drag and providing an added increase to stop speed. Typically an increase of 1-2 MPH can be found in good riding conditions. 

Fits 2015+ Yamaha VXR, FX SVHO & 2017-2021 Yamahas

Note: Only Suits Yamaha Models WITH RiDE System

Instructions

Fitment

• Yamaha

Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)

Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.

? Moulded black silicone hose – for a smooth, easy installation

? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform

? Billet anodised block-off plate – clean and durable finish

? Deletes restrictive sound suppression baffles – freeing up power and improving flow

? Silicone hose design – helps reduce drone and exhaust resonance

? Essential for high-horsepower and race applications

Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??

Instructions

Download Instructions

Fitment

• 2015-2019 Yamaha

Unlock More Power and Sound ???? – No Cutting Required

Ditch the factory restrictions and unleash your ski’s true potential. This system removes the restrictive sound suppression baffles in your exhaust for increased performance and a more aggressive tone.

? No drilling or cutting required – uses the OEM pump tunnel outlet

? No hose modifications needed – easily return to stock if desired

? Billet anodised outlet – precision-engineered to fit directly into the OEM location

? Designed for modified machines – an essential upgrade for performance builds

? Compatible with all 2008+ Yamaha 1.8L models (Excludes EX & EXR)

Ready to ride harder, louder, and faster? This is the upgrade your ski has been waiting for.

SILICONE HOSE NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

Full disclaimer: All aftermarket exhausts—ours included—will be significantly louder.
So if you want to sound tough and be heard, this upgrade’s for you. If not… maybe stick with the stock setup and enjoy the quiet life ??

Instructions

Download Instructions

Fitment

• 2014-2020 Yamaha

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Looking for a quick and easy solution to the lack of Trim on your Yamaha Jetski? Look no further than the Yamaha Trim extension! This extension has been specifically designed to increase your trim range and bring the nose of your ski higher, resulting in reduced surface drag and an added increase to stop speed.

As a cost-effective upgrade, you can expect to see an impressive 1-2 MPH increase in good riding conditions. And the best part? It fits 2022+ Yamahas, so you can enjoy all the benefits of increased trim range without any hassle. Don't be held back by stock limitations, upgrade to the Yamaha Trim extension today!

Instructions

Fitment

• Yamaha

These model skis have a very flat intake area that lose hook up in anything but perfect conditions. To get any sort of performance from these two boats an intake grate is absolutely essential.

The major performance benefit of our WR202 is improved hook up in all water conditions. It will transform your boat in choppy and rough conditions by reducing cavitation and keeping the pump fully loaded.

Instructions

Fitment

• 1986-1995 Kawasaki

Want to get rid of your OEM grips and slip on some new ones? If you've got a yamaha, there's a good chance you'll need this little guys. Super easy to install, these extensions fit on the end of your OEM bars to securely lock in your grips and prevent them from sliding off if your locking clamp fails.

These bar extensions can be install in less than five minutes and their billet anodized construction and sleek minimal design ensure they'll suit any ski or aftermarket grips.

All hardware included.

Fitment

• Yamaha

• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘4 bolt’ 1.8 Yamaha pump models

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha SVHO

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in kit

Instructions

Fitment

• 2008-2021, 2023-2025 Yamaha

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

• 2005-2020 Sea-Doo
• 2005-2020 Sea-Doo 4-TEC

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Fitment

• 2008-2020 Yamaha

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller.

Fitment

• Yamaha
• Yamaha SVHO

• Fits Yamaha SuperJet 2021+ models
• 2° pump wedge Increases Bow Lift, reduces drag for higher speed
• Improves Handling - better turning response and stability
• Ideal for all styles of riding - surf, freeride, and high-speed flatwater
• Includes stainless steel mounting bolts for easy installation
• Made from durable, marine-grade materials

Fitment

• Yamaha
• Yamaha SuperJet

We get it, you want people to know you're running Worx parts. Why wouldn't you? 

That's why we've put together this awesome sticker pack!

•     The most advanced variable rate throttle in the world
•     Innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference
•     Ultra-compact housing with snap-together elbows make it easy to install and change reels
•     New sleek design requires less handlebar space for lever clearance and throttle position
•     Use smaller reels for slower throttle rate and larger reels for faster throttle rate
•     Included cam reel provides progressive throttle response preferred by some riders
•     Unique reel design allows fast reel changes
•     Cable boot keeps dirt and dust out for reliable and smooth operation
•     Billet aluminum inline cable adjusters for easy installation and adjustment
•     Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
•     Upper section of cables use 6 mm housing to provide solid support of adjusters
•     Simple to install and maintain
•     Designed by Motion Pro
•     Patent pending
• Kit includes:
•     Rev2™ throttle assembly with throttle tube (MX/Off-Road kits include Titan™ Throttle Tube)
•     Motion Pro Rev2™ black vinyl cables specifically designed for your bike
•     MX/Off-Road kits include Motion Pro DirtControl™ grips
•     Standard interchangeable reels: 35mm, 40 mm, 45 mm, 50 mm
•     Cam reel (Offroad kits include MX/Off-Road cam reel)

Email Tristana@browardmotorsports.com

• Completely redesigned and improved edition of the popular Motion Pro Vortex™ throttle
• New lighter, ultra-compact design maximizes handlebar space
• POM pulley with brass bearing for smooth feel and extended wear resistance
• Now includes super tough Motion Pro Titan Throttle Tube™
• Die cast aluminum construction with billet aluminum cover
• Smooth painted black finish
• Compatible with Motion Pro DirtControl™ V2 and ODI V2 Lock-On grips using cam ‘C’
• Fits 7/8" (22 mm) bars 
• Replaces OEM throttle on many Japanese 2-stroke MX bikes
• Fits RM125/250 95-05, YZ125 & 250 96-10, & WR250Z 97 with the stock throttle cables
• Special application Motion Pro cables available for use on many other bikes
• Fast twist rate opens throttle at 0.526 mm of cable pull per degree of rotation
• Will open carb to full throttle on most 2-stroke bikes in just 70 degrees of rotation
• Will pull 50 mm at maximum twist of 95 degrees

Email Tristana@browardmotorsports.com

• Kit includes enough pins for 1 caliper 
• high quality bolts have pre applied lock tight 
• Retaining clips are included when necessary 

Email Tristana@browardmotorsports.com

• Kit includes enough pins for 1 caliper 
• high quality bolts have pre applied lock tight 
• Retaining clips are included when necessary 

Email Tristana@browardmotorsports.com

• Kit includes enough pins for 1 caliper 
• high quality bolts have pre applied lock tight 
• Retaining clips are included when necessary 

Email Tristana@browardmotorsports.com

• Kit includes enough pins for 1 caliper 
• high quality bolts have pre applied lock tight 
• Retaining clips are included when necessary 

Email Tristana@browardmotorsports.com

• Delivers increased acceleration and top speed
• Reduces cavitation
• High grade stainless steel for corrosion resistance
• Increased strength over stock
• Designed for high performance applications
• Exceeds the limits of original pump efficiency
• Computer designed 140mm pump, 75mm hub, and 12-vane stator section
• Uses OEM bearings, seals, driveshaft (not included)

Email Tristana@browardmotorsports.com

Introduce a new line of OEM replacement oil coolers for Polaris. Each direct-fit kit comes with a premium quality oil cooler that includes replacement O-rings, giving you everything you need for a quick, hassle-free installation. Replacing the oil cooler is essential during an overhaul to eliminate the risk of contamination from a polluted heat exchanger, ensuring your new engine runs cleaner, cooler, and longer.

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Non-marring clamp-on design requires no modification of fork cap
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs
• Compatible with Motion Pro Micro Bleeder set

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Designed to fit motorcycles with 49 mm Showa forks
• For use with Showa 49 mm fork caps featuring the tall compression adjuster height
• Non-marring clamp-on design requires no modification of fork cap
• Requires 12 mm handlebar clearance above top of fork cap
• Compatible with Motion Pro Micro Bleeder Set
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Designed to fit motorcycles with 49 mm Showa forks
• For use with Showa 49 mm fork caps featuring the short compression adjuster height
• Non-marring clamp-on design requires no modification of fork cap
• Requires 12 mm handlebar clearance above top of fork cap
• Compatible with Motion Pro Micro Bleeder Set
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs 

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

Fire Power Offroad Stator

• OEM-style replacement stators

Included Items:

(1) Stator assembly W/wiring harness

No instructions

Email Tristana@browardmotorsports.com

FORK BUSHING KITS

• Bushing kits contain 2 slider bushings, 2 leg bushings along with all of the copper washers, o-rings and fork seal snap rings
• Bushings have been Dyno tested to 500,000 with less wear that OEM bushings

FORK OIL / DUST SEAL KITS

• Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
• Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
• Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
• Lower Stiction, Longer Life!  It doesn’t get any better than this!
• Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance

Functions smoothly during repetitive jumping. Seal life is 540,000 strokes, equal to 100 hours of continuous 28.8’ jumps. Seal life exceeds current seals by 496,800 strokes (8 hours of continuous 28.8 foot jumps).

Email Tristana@browardmotorsports.com

swingarm bearing & kits

• contains all of the bearings, shafts, seals and bushings required to rebuild a swingarm to factory specifications
• manufactured from 52100 bearing steel for improved performance and extended life
• feature teflon d coated washers in place of the thrust needle bearings
• teflon d coated washers offer superior resistance to dirt, water and lack of lubrication which are all factors leading to premature failure

swingarm linkage bearing & seal kit

• contains all of the bearings (including the lower shock bearing kit), shafts, seals and bushings required to rebuild swing arm linkage to factory specifications
• the most complete kit in the industry

upper & lower shock bearing & seal kits

• contains the bearing and all of the seals, spacers and pins (if required) to rebuild the shock bearing to factory specifications.

Email Tristana@browardmotorsports.com

swingarm bearing & kits

• contains all of the bearings, shafts, seals and bushings required to rebuild a swingarm to factory specifications
• manufactured from 52100 bearing steel for improved performance and extended life
• feature teflon d coated washers in place of the thrust needle bearings
• teflon d coated washers offer superior resistance to dirt, water and lack of lubrication which are all factors leading to premature failure

swingarm linkage bearing & seal kit

• contains all of the bearings (including the lower shock bearing kit), shafts, seals and bushings required to rebuild swing arm linkage to factory specifications
• the most complete kit in the industry

upper & lower shock bearing & seal kits

• contains the bearing and all of the seals, spacers and pins (if required) to rebuild the shock bearing to factory specifications.

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

• kits contains all bearings & seals required to re-fit a wheel
• the most extensive line of kits for off-road applications
• wheel bearings typically fail from water and dirt contamination. the all balls wheel bearing was developed in partnership with kml bearing and is designed for the difficult operating environment of the power sport industry
• premium emq quality, hi-speed bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and improved grease retention
• type tc nitrile elastomer wheel seals are specifically designed to keep out water and dirt
• rubber coated outside diameter creates an optimum seal at hub
• steel garter spring guarantees constant pressure on the axle shaft over the life of the seal

Email Tristana@browardmotorsports.com

OE SPACERS TYPICALLY WEAR OUT WITHIN A YEAR OF HARD RIDING. OE WHEEL SPACERS SHOULD BE CHECKED AND REPLACED AS NEEDED WITH EVERY BEARINGS SERVICE. WATER AND DIRT ACT AS A GRINDING COMPOUND BETWEEN THE SEAL FACE AND THE MATING SURFACE OF THE SPACER. ONCE THE GROOVES ARE DEEP ENOUGH, THE SEALING SURFACE IS LOST, ALLOWING WATER AND DIRT TO PASS THROUGH AND CONTAMINATE THE BEARING.

• DESIGNED FOR YEARS OF SERVICE EVEN IN THE DIRTIEST RIDING ENVIRONMENTS.
• ALL BALLS ALUMINUM SPACERS FEATURE A HARDENED STEEL SHELL PRESSED OVER THE ALUMINUM TO PROVIDE SUPERIOR WEAR SURFACE
• MANUFACTURED WITH 52100 BEARING STEEL THAT IS THROUGH HARDENED, PRECISION GROUND AND PLATED FOR YEARS OF SERVICE

Email Tristana@browardmotorsports.com

OE SPACERS TYPICALLY WEAR OUT WITHIN A YEAR OF HARD RIDING. OE WHEEL SPACERS SHOULD BE CHECKED AND REPLACED AS NEEDED WITH EVERY BEARINGS SERVICE. WATER AND DIRT ACT AS A GRINDING COMPOUND BETWEEN THE SEAL FACE AND THE MATING SURFACE OF THE SPACER. ONCE THE GROOVES ARE DEEP ENOUGH, THE SEALING SURFACE IS LOST, ALLOWING WATER AND DIRT TO PASS THROUGH AND CONTAMINATE THE BEARING.

• DESIGNED FOR YEARS OF SERVICE EVEN IN THE DIRTIEST RIDING ENVIRONMENTS.
• ALL BALLS ALUMINUM SPACERS FEATURE A HARDENED STEEL SHELL PRESSED OVER THE ALUMINUM TO PROVIDE SUPERIOR WEAR SURFACE
• MANUFACTURED WITH 52100 BEARING STEEL THAT IS THROUGH HARDENED, PRECISION GROUND AND PLATED FOR YEARS OF SERVICE

Email Tristana@browardmotorsports.com

• Each kit contains enough replacement pins for one caliper
• High quality pins have pre-applied thread locking compound
• Retaining clips are included when necessary

Email Tristana@browardmotorsports.com

• Steel wheel weights available in black powder coat or nickel finish, 1/8 and 1/4 ounce sizes
• Compact size fits well on a variety of wheel contours
• Industrial double stick tape ensures strong adhesion to the wheel

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

A.

• Pop-in 412 series (.453") valve stem seals well in OEM and aftermarket rims
• Shorter for ATV applications

B./C.

• Threaded full 1-3/16" length for various rim thicknesses
• Fits .327’’ valve hole and equipped with O-ring seal

D.

• Pop-in 413 series (.453") valve meets the same rigid standards required for OEM applications
• Designed to resist damage from ozone and premature rubber deterioration from valve hole compression, heat, cold and moisture

E.

• Chrome plated sealing valve cap
• 10/Pack Grommets to fit either .453 or .625’’ valve holes

F.

• 90­° valve stem

G.

• 45° valve stem

Email Tristana@browardmotorsports.com

• Remote control via both iOS & Android applications
• Name the tester and easily identify between vehicles
• Perform charging test for vehicles equipped with smart charging control
• Scan VIN & battery S/N
• Shop & Customer Info
• Firmware field upgradable functionality
• App upgrade capability
• 1 year limited warranty

Email Tristana@browardmotorsports.com

• Available in 12mm/13mm & 12mm/14mm
• Forged steel with satin chrome finish is ultra strong and durable
• Sis point box ends maximize surface contact and reduce risk of damaging sprocket nuts
• Offset design and long arms provides clearance over sprocket and protects hands
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

1. FORGED
   All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.
2. ADVANCED MANUFACTURING TECHNIQUES
   Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions (cast iron, chrome, nikasil and boron composite) with confidence.
3. OVERSIZE OPTIONS
   Wiseco’s wide range of oversize pistons increase the life of cast iron lined cylinders. With the availability of replacement cylinder sleeves, chrome, nikasil and boron composite cylinders can be resleeved to accept Wiseco’s oversizes.
4. COMPUTERIZED
   Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-performance racer and recreational enthusiast with the finest forged piston available.
5. EASY AVAILABILITY

           WPS Distribution centers combined with Wiseco's extensive inventory selection provides you with easy access one of the largest         powersports suppliers of pistons and top end rebuild kits in today's marketplace.

FOR TOP OF APPLICATION PAGES:

TOP END REBUILD KITS WILL COME WITH PRECISION MATCHED PISTONS, RINGS, CIRCLIPS, WRIST PINS, AND A TOP END GASKET KIT FOR 1 MOTOR.

PISTONS KITS ARE SOLD PER CYLINDER AND WILL INCLUDE PRECISION MATCHED PISTONS, RINGS, AND CIRCLIP.  PRO-LITE SERIES PISTONS WILL INCLUDE WRIST PIN.

Email Tristana@browardmotorsports.com

FIRE POWER RADIATORS

• Made from quality 3003 Aluminum Alloy for high strength, heat & pressure tolerance
• includes 2.0 BAR / 28.5psi high pressure radiator cap
• Natural aluminum finish closely matches OEM for a smooth look with good corrosion resistance
• Sold separately, can replace one or both
• Provides a great option for crash damage replacement 
• Radiators are TIG welded by hand
• Every radiator passes a three step water leakage inspection and air inflation inspection

Email Tristana@browardmotorsports.com

FIRE POWER RADIATORS

• Made from quality 3003 Aluminum Alloy for high strength, heat & pressure tolerance
• includes 2.0 BAR / 28.5psi high pressure radiator cap
• Natural aluminum finish closely matches OEM for a smooth look with good corrosion resistance
• Sold separately, can replace one or both
• Provides a great option for crash damage replacement 
• Radiators are TIG welded by hand
• Every radiator passes a three step water leakage inspection and air inflation inspection

Email Tristana@browardmotorsports.com

FIRE POWER RADIATORS

• Made from quality 3003 Aluminum Alloy for high strength, heat & pressure tolerance
• includes 2.0 BAR / 28.5psi high pressure radiator cap
• Natural aluminum finish closely matches OEM for a smooth look with good corrosion resistance
• Sold separately, can replace one or both
• Provides a great option for crash damage replacement 
• Radiators are TIG welded by hand
• Every radiator passes a three step water leakage inspection and air inflation inspection

Email Tristana@browardmotorsports.com

FIRE POWER RADIATORS

• Made from quality 3003 Aluminum Alloy for high strength, heat & pressure tolerance
• includes 2.0 BAR / 28.5psi high pressure radiator cap
• Natural aluminum finish closely matches OEM for a smooth look with good corrosion resistance
• Sold separately, can replace one or both
• Provides a great option for crash damage replacement 
• Radiators are TIG welded by hand
• Every radiator passes a three step water leakage inspection and air inflation inspection

Email Tristana@browardmotorsports.com

FIRE POWER RADIATORS

• Made from quality 3003 Aluminum Alloy for high strength, heat & pressure tolerance
• includes 2.0 BAR / 28.5psi high pressure radiator cap
• Natural aluminum finish closely matches OEM for a smooth look with good corrosion resistance
• Sold separately, can replace one or both
• Provides a great option for crash damage replacement 
• Radiators are TIG welded by hand
• Every radiator passes a three step water leakage inspection and air inflation inspection

Email Tristana@browardmotorsports.com