Features

Sea-Doo 295100803 LinQ Base Installation Kit

Fitment: 

GTI, GTS and GTR (2011 and up),

GTR-X (2017 and up),

RXP (2012 and up)

BMS Racing 6" stickers. 

Stickers are 6" long x 2" high

Unlock the full potential of your watercraft with our ECU Reprogramming Service.

Flash tuning is a process where your watercraft ECU can be re-programmed, to obtain the full potential of your watercraft engine.

Upgraded tuning parameters:

• Increase Horsepower by improved fuel and timing maps
• No engine internal modifications required
• Improve throttle response
• Enhance efficiency through all RPM
• Increase rev limiters
• Increase torque through entire powerband
• Improve throttle control & reaction
• Increase top speed
• For 93 octane pump fuel

Please specify your modifications and performance goals. 

PLEASE NOTE: This is an ECU reflash service performed on your stock ECU.

Once you place your order please wait for an email from our C.M.S Customer Service Team with details on where to ship your ECU and a form to be sent with it.

C.M.S. will perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service. 

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing
• Fits 7/8 handlebars allowing you to select the style of bars that suits your own unique riding style
• Allows use of both styles of OTAS sensors
• Black anodized

Description

• Direct replacement for OEM Sea-Doo 300 HP intercoolers.

• Compatible with OEM Sea-Doo 300 HP rubber intercooler air hoses and Riva Gen. 4 intercooler piping kit

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Kit contents: Fizzle™ SuperCooler with waterline fittings and zinc anode

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Integrated zinc anode for added protection against corrosion

Description

• Kit contents: Fizzle™ SuperCooler and Fizzle™ Sea-Doo 300 Intercooler Tubing Upgrade Kit: Intercooler waterline fittings and zinc anode, complete set of heavy-duty 5-ply silicone tubing with internal metal reinforcement, high-quality marine grade 316 Stainless Steel hose clamps.

• Direct replacement for full OEM Sea-Doo 300 HP intercooler system

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Description 

• In the tank, replacement increases fuel pressure approx 10psi
• Cost effective alternative to External fuel regulator
• Ideal for Low boost applications and reflashed/ aftermarket ECU

Description 

Larger openings for increased water flow into the engine for lower engine temps

Suits any late model 155mm jet unit

 Description 

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps. 

Key Features: 

New Anodised core!!!!

• Huge internal core element for increased airflow and denser air
• Extremely lower air intake temps over OEM cooler
• Huge HP gains up to 45+ Horsepower in certain applications
• Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
• Upright element and water flow for increased heat transfer and efficiency
• Upright mounting allows water to completely drain from the unit after use
• Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
• Complete Independent Intercooler cooling kit upgrade for lower air temps
• Note* May required adjustment of reverse cable mounting for early model FX 08-11

WR01007 YAMAHA 1.8L INTERCOOLER KIT INSTRUCTIONS

• Vent Valve Cover Breather Filter
• Performance: improves up to 95% filtration efficiency.

Description 

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

More accurate & consistent torque loading provides a more uniform clamping force on the head gasket

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• 8 feet of Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• Suits 185/215/255/260 models

Description 

2.5 INCH BILLET OUTLET
MOULDED SILICONE HOSE eliminate resonance to deliver tough, throaty exhaust sound
Standard outlet Block Off included in the kit
Eliminates restrictive sound suppression baffles
Suitable for Recreational and Race Skis
Suits RXPX 260 & 300 models / GTR 215 & 230 models

***IMPORTANT PLEASE LIST MODEL AND YEAR OF SKI IN NOTES WHEN ORDERING AS THERE ARE 2 SIZE BLOCK OFF. THIS WILL ENSURE YOU ARE SHIPPED THE CORRECT BLOCK OFF FOR YOUR MODEL / YEAR OF SKI

Description 

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Description 

Pump Seal Kit to suit Intake Grate WR244.

Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.

Description 

Easily the first choice of Modification for you ST3 Sea-Doo RXTX. During testing, we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight-line stability
• Reduced cavitation on taking off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTX 155 AND RTX 230 MODELS

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you are off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Does not fit GTX ST3 or RTX 230 MODELS WR562-I for GTX and 230 Models

Description 

WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.

Come with all brass fittings included

Requires OEM exhaust sounds suppression baffle to be removed to install. (WR04029 freeflow available)

These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!

• 2 DEG Billet anodized pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Description 

• Tapered offset to match OEM reduction nozzle
• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘3 bolt’ 1.8 Yamaha pump models

Description 

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tailwhips and aerial moves

Please note we do NOT recommend this plate for racing or high-speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Description 

Designed not just for a significant improvement in performance and safety but killer style!

Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski

Description 

WR06014-ET-KIT

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

This intake grate is a must for anyone wanting to get the best from their SX-R. With the OEM grate, the boat loses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drives out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Description 

This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out. 

The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you slam the boat into the hardest turns with confidence that you will be fully in control. The double concaves in the rear section also give you the extra bight needed to rail through the tightest turns.

Performance Benefits:

• Better handling when cornering, smoother more controlled turning
• Our sponsons let the boat ride higher in the bow which gives several advantages
• Dryer ride in all conditions
• Higher top speed because the boat rides higher in the water, around 1 1/2 - 2 MPH speed gain
• Adjustability to suit your riding style - down position (top hole) for recreational riding and racing and up position (bottom hole) for enduro rides or races, this position will give you more speed but less aggressive cornering

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.

Email danellym@browardmotorsports.com for more information on this item.