Broward Motorsports Racing Yamaha SVHO/SHO TiAL Blow-Off Valve Kit
Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit. Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.
-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry
- 4-Ply silicone hose
-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.
-Get greater reliability by reducing wear to your clutch and engine components.
-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.
NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020
Yamaha FX Audio Package
Yamaha exclusive EcoXGear® Bluetooth® speakers, custom cup holder mounts and supporting hardware for FX WaveRunners.
IP67 Waterproof / Shock resistant / Floating
30W 4” woofer + separate tweeter for dynamic frequency response
12-17 hours of playtime
EcoTalk button for easy activation of Siri & Google voice
EcoConnect paired out of the box for stereo listening; possible to de-pair and use independently
One-touch off - turn off one speaker, other goes off too
Bluetooth 4.2 streams wirelessly from up to 100 feet away
Includes custom mount for FX unit integrated installation
FX CRUISER HO(2020, 2019)
FX CRUISER SVHO(2020, 2019)
FX HO(2020, 2019)
FX LIMITED SVHO(2020, 2019)
FX SVHO(2020, 2019)
BMS Racing Yamaha Titanium Valve Retainer Kit 1.8L SVHO/SHO
BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS.
All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors
Solas Impeller Shaft Holder WR014H
Impeller Shaft Holder
Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Typical top speed gains 3+ MPH over OEM Yamaha SHO or SVHO intercooler
Includes 50mm TiAL style or 35mm HKS style (your choice) blow off valve flange attached to the intercooler or select the blow off valve option of your choice
Typical peak RPM gains 250-300+, acceleration and throttle response
Kit Contents: The Fizzle Y1000 intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008 to present, including FZR, FZS, GP1800, FX SHO and SVHO models and supercharged Yamaha Jet Boats
WE ARE EXCITED TO NOW OFFER A COMBO DEAL WITH A BRACKET SPEAKER COMBO , THESE ARE PRE-ORDERS STARTING 6\15, SO IT WILL TAKE AT LEAST 30 DAYS FOR SHIPPING, SO PLEASE KEEP THAT IN MIND WHEN ORDERING, YOU CAN SAVE MONEY WITH THE COMBO DEAL , PLEASE CHECK OUT THE LINK TO SEE MORE ABOUT THE SPEAKER.
V2 BRACKET ONLY WORKS ON YEARS 2008 TO CURRENT VX, GP1800, FX, AND EX
YAMAHA FX WAVERUNNERS AUDIO PACKAGE KIT
Take your sound out on the water with these rugged waterproof Bluetooth® speakers, included in this convenient Yamaha Audio Package. Featuring a booming 15W speaker and large passive sub-woofer, the EcoDrift has incredible sound in a portable package, and is still tough enough for every outdoor adventure.
IP67 waterproof / shock resistant / floating
Big sound and long playtime packed into a slim, rugged, and portable size
Loud 15W speaker with large 3" bass enhancing passive woofer
15+ hours of playtime
EcoTalk button for easy activation of Siri and OK Google voice assistant
EcoConnect compatible - pair two units together for stereo sound (30ft range)
Bluetooth 4.2 streams audio wirelessly from up to 100 feet away via your Smartphone, tablet or any Bluetooth® enabled device
3.5mm AUX port for wired connect
Carrying lanyard and carabineer
Solas Yamaha 160MM Concord 13/18 Impeller
The new Solas Concord YV-CD-13/18 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.
Solas Yamaha 160MM Concord 13/20 Impeller
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 13/20 variable pitch impeller works great with stock through Stage 2 modifications.
FX BOLT UPGRADE KIT 2019-2020 YAMAHA FX
If you currently have 2019 or 2020 FX you’ll start to notice that your bolts are changing colors.
The bolts on the factory ski are coated, but they’re still showing signs of corrosion.(Non stainless steel )
This kits allows you to replace the factory bolts with 316 stainless or Anodized aluminum . Not only does it look extremely good ,but also fixes a problem. This Kit is a must-have if you currently own this year make and model of the FX ski. If you don’t see a color combination please contact me ,I might have something in stock..
* Stainless only comes in silver
*Color boltsandwashersare aluminum. ( if you Order aluminum you want to make sure to use your hand … No Drills.. Also a thread tape on the bolts will help keep the nuts in place}
* Kits include all of the exterior bolts including (18) the cup holder bolts (6)
*Remember aluminum is soft, so if you put these in the cup holders do you not want to keep taking them in and out..
WORX RACING FX SPONSONS 10-20 FX SVHO/HO
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
Specifically designed for the unique handling characteristics of the 2019 Yamaha FX
Product benefits include:
- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off - Stops the ski from sinking in the back in tight turns like stock sponsons - Allows for Greater corner entry speed - Maximized top speed performance by creating less drag - Superior straight line stability - Easy installation to stock mounting points
IJSBA legal for all classes
Includes backing rails and all necessary hardware.
Billet Engine coupler 2008+ FZR, FZS, FX, FX SHO
Billet Drive coupler for Yamaha 1.8 Engine
Fits any 1.8 Yamaha Engine
Billet construction huge strength upgrade over stock cast unit
Utilizes OEM rubber coupler
A must for any High Horsepower/ Race watercraft
WORX Yamaha 1.8L Dual cooling plate kit
Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into you Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
Billet anodized construction allowing 1,2 or 3 fittings to be installed
Fits all 1.8 Yamaha engines (may require o-ring for early models)
Allows for maximum cooling to the engine under high boost
Race proved in a closed course and endurance
WORX Yamaha Pump Cooling Plate Dual
Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.
BRASS FITTINGS NOT INCLUDED.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
WORX Yamaha 1.8L bar extension suit OEM bars/ODI grips
Billet anodized construction
Allows fitment of 130mm ODI lock grips
Billet endcap design to prevent grip sliding off if lock clamp fails
NOTE: Grips NOT Included
FX, FX SHO, 2014+ FS SVHO Intake Grate
Specifically designed for the 2012 Yamaha FX SHO hull.
- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!
- Superior hook up
- Better bow lift for top speed
- Smoother turning
- Utilize WORX Pump Plug kit WR0703
2012+ FX, FX SHO, 2014+ FX SVHO Pump Seal Kit
Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.
This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.)
The Kit is easy to fit and provides an immediate improvement on stock.
WORX Yamaha 1.8L Pump wedge
These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!
2 DEG Billet anodized pump wedge
Promotes bow lift to increase top speed from 1 to 2 mph
Higher nose ride height allows for dryer ride
Cost effective upgrade for better handling and top speed
The High Performance, Reliable, self-bailing drain plug made specifically for your Yamaha Versiplug #1401 '04-'19 Yamaha '06-'19 Yamaha GPR
These DO NOT fit the Pre ‘07 Yamaha GPR. ‘00-‘06 GPR uses Yamaha plugs #1201
Also fit Honda, Polaris and most Kayaks with screw in drain plugs
To properly identify your plug please zoom on the threads for reference. Each Picture is of the actual plug for this model.
COLORS NOT LISTED: ANODIZED RED, GREEN,PINK,BLUE, PURPLE,YELLOW, AND ORANGE
Yamaha WaveRunner FX Cover 2019+ Black/Charcoal
Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.
FX SVHO/ HO (2019, 2020, 2021)
FX CRUISER HO (2019, 2020, 2021)
FX CRUISER SVHO (2019, 2020, 2021)
FX LIMITED SVHO (2019, 2020, 2021)
JL AUDIO® SlamPak System for Yamaha FX WaveRunners - Black/White
Designed for Yamaha FX WaveRunners, this all-new system delivers a powerful audio option never before seen on PWC. This JL AUDIO® SlamPak™ is sure to transform your WaveRunner into a serious music machine, adding even more enjoyment to every minute you spend on the water.
Also includes plug-and-play harness with Deutsche connectors, marine-grade circuit breaker, power cable, speaker cable, audio cable, stainless steel mounting brackets, and hardware
Pair of waterproof VeX™ speaker pods houses two high-performance 6.5" marine-grade coaxial speakers to deliver loud, clean audio in real-world marine environments
Neatly tucked away, is a custom-formed Stealthbox® subwoofer system, equipped with a potent 8.8" marine subwoofer, generating powerful bass and optimized for open-air environments
Compact, 500 watt, 4-channel amplifier to power the entire system
MBT-CRX Bluetooth® controller/receiver connects to your Bluetooth® device and accesses your playlist wirelessly
Exceeds industry standards for corrosion resistance and UV exposure
2019 FX HO/ SVHO Non Cruiser Jet Trim Seat Cover
Fits 2019 Yamaha FX HO and FX SVHO non-cruiser models.
Please call 800-940-3000 or email firstname.lastname@example.org for custom orders.
The Original Factory oil filter is the best way to ensure quality fit and function. Filters should be replaced with each oil change as specified by the manufacturer.
Yamaha 1.8L SVHO 27 Sprag OEM Supercharger Clutch
New 27-Sprag Yamaha Genuine OEM replacement supercharger clutch for all Yamaha 1.8L Supercharged engines features larger, heavy-duty sprag for greater durability. Includes low-profile, button-head bolts (2) for cam chain guide. Backwards compatible to 6ET-17800-10-00.
WORX Yamaha Head Stud Kit (ARP) all Yamaha 1.8 HO/SVHO
This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.
A must have for any engine re-build or performance modifications!
Kit includes 10 x stud/nut/washer. Picture for illustration purpose only
WORX Yamaha Pump Cooling Plate Single
Yamaha Single fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.