Broward Motorsports Racing Yamaha SVHO/SHO TiAL Blow-Off Valve Kit
Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit. Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.
-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry
- 4-Ply silicone hose
-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.
-Get greater reliability by reducing wear to your clutch and engine components.
-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.
NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020
BMS Racing Yamaha Titanium Valve Retainers Kit 1.8L SVHO/SHO
BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS.
All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors
WORX Yamaha Air Filter Kit All 1.8L SHO/SVHO
Our WORX Racing Yamaha 1.8 Air filter kit.
Allows maximum airflow to your engine removing restrictive OEM paper filter
Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
Billet anodized 4-inch adaptor mounts easily to the hull
Silicone molded hose the tapers down to suit the supercharger with a smooth internal bore to eliminate any intake turbulence
Increased acceleration and overall RPM’s
Works great combined with (WR04001) Ribbon Removal for maximum airflow into your engine
Race-proven design a must for and Modified/ Race watercraft
Engine Breather filter also provided in the kit
WORX Yamaha Ribbon Remover
Replaces the restrictive mesh element in the intake manifold.
It increases air flow to the engine, maximizing horsepower.
Constructed from billet for extra durability and strength
Tapered design to allow more air flow
Suits all Supercharger models and all 13+ N/A Models
2018+ require plastic manifold to be drilled out
DOES NOT SUIT NON SUPERCHARGERD MODELS 2012 AND EARILER
WORX Exhaust Kit SVHO GP1800/ FX 12+/ VXR,VXS 15+
Our Yamaha 2015+ VXR/VXS, FX SVHO rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.
Molded Black silicone hose for easy install Billet anodized black 3-inch exhaust outlet Billet anodized block off plate Eliminates restrictive sound suppression baffles Silicone hose reduces exhaust resonance and droning A must for High horsepower/ Racecraft
Billet Engine coupler 2008+ FZR, FZS, FX, FX SHO
Billet Drive coupler for Yamaha 1.8 Engine
Fits any 1.8 Yamaha Engine
Billet construction huge strength upgrade over stock cast unit
Utilizes OEM rubber coupler
A must for any High Horsepower/ Race watercraft
WORX RACING WR554-I INSERT EDITION SPONSONS
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
Specifically designed for the unique handling characteristics of the Yamaha FX and FZ hulls.
Includes backing rails and all necessary hardware.
Product benefits include:
- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off - Stops the ski from sinking in the back in tight turns like stock sponsons - Allows for Greater corner entry speed - Maximized top speed performance by creating less drag - Superior straight line stability - Easy installation to stock mounting points
IJSBA legal for all classes
2020 Yamaha SVHO 160mm Pump Upgrade
Upgrade your SHVO/SHO pump to the new 2020 SVHO pump!
The new 2020 SVHO pump has a 160mm stator. The 2020 SVHO pump uses a one piece housing for both the impeller and wear ring.
The kit will include all bearings, o-rings, oil seals, and spacer you need to transfer your existing driveshaft over to the new 2020 pump housing.
PLEASE TAKE NOTE: If you have an SHO ski you will need to purchase a SVHO driveshaft for this to work. Please email us email@example.com if you have a SHO and need a driveshaft.
Yamaha Flush Kit
The Replacement Flush Hose features a swivel hose fitting. These flush hoses fit all late-model WaveRunners and Yamaha Boats that were equipped with factory flush kits. Available in red or blue.
WORX RACING WR06029 YAMAHA 2009+ FZR/FZS DROP IN STEERING STEM
Constructed from Marine Grade 6061 Aluminum for superior strength
Retains original throttle/steering sensors
Designed for racing
Fits 7/8 handlebars allowing you to select the style of bars that suits your own unique riding style
Allows use of both styles of OTAS sensors
WORX Yamaha Fuel Pressure Reg 1.8L
In the tank, replacement increases fuel pressure approx 10psi
Cost effective alternative to External fuel regulator
Ideal for Low boost applications and reflashed/ aftermarket ECU
WORX Yamaha Free Flow Exhaust SHO/SVHO
Allows removal of restrictive sound suppression baffles in the exhaust.
This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.
This is a must for any modified personal watercraft.
WORX Yamaha Supercharger Rebuild Kit
Includes all bearing and plates that are not available to buy separately OEM
SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
WORX Yamaha 1.8L Pump wedge
Create more bow lift for less hull drag and increase in top speed
One piece billet anodized construction.
WORX RACING WR233 YAMAHA FZR FZS INTAKE GRATE
Greater stability control and turning capability
- Enhanced hook up
- Improved handling in Rough water conditions
-Increase in acceleration/ help's reduces cavitation
-compatible with WR0701 Pump Plug kit
WORX Yamaha Head Stud Kit (ARP) all Yamaha 1.8 HO/SVHO
This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.
A must have for any engine re-build or performance modifications!
Kit includes 10 x stud/nut/washer. Picture for illustration purpose only
WORX Yamaha Pump Cooling Plate Dual
Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.
BRASS FITTINGS NOT INCLUDED.
ET Low Boost Supercharger Impeller
Adding more volume of air for acceleration and 2-3 lbs of boost 11.3 lbs @ 7700 rpm and 14lbs at 8450 This will be a drop in. We have made this wheel 25% lighter than stock. This is a billet wheel made from 7075 T651 and machined on a 5 axis CNC machining center with a blade accuracy of .001 in and also hard anodized for corrosion resistance and balanced to a spec of .008 grin. This wheel works with the PowerShot fuel controller no other fuel requirements needed.
Hands down this are the lightest and highest performing low boost stock ECU wheel on the market.
WORX Recommends the use of a Cooling upgrade with the use if any upgraded Supercharger wheel and reflash!
WORX Yamaha Engine Cooling Kit
WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed extra cooling when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance.
Kit includes all necessary fittings, hoses, and clamps you need.
1/2 hose and fittings. Suitable for Stock and mild applications (eg. filter, reflash, etc.)
A must for skis with re-programmed ECU and higher RPM limit
NOTE: DOES NOT suit 2018+ YAMAHA MODELS WITH NEW PUMP STRAINER THEY REQUIRE WR04018 KIT
WORX Yamaha 1.8L Throttle Body Adaptor
Billet Anodized Construction
Replaces expensive OEM rubber part which can fail and lead to boost leaks on S/C models
Comes with all hardware, gasket, and O-Rings for installation
Suits all Yamaha 1.8 Waverunners
WORX Through hull fitting 1/2inc
Allows for easy installation of extra cooling lines. 1/2 inch.