Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.
Allows maximum Air flow to your engine removing restrictive OEM paper filter
Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
Billet anodized 4-inch adaptor mounts easily to hull
Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
Increased acceleration and overall RPM’s
Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
Race proven design a must for and Modified/ Race watercraft
Engine Breather filter also provided in kit
Broward Motorsports Racing Yamaha SVHO/SHO TiAL Blow-Off Valve Kit
Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit. Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.
-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry
- 4-Ply silicone hose
-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.
-Get greater reliability by reducing wear to your clutch and engine components.
-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.
NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020
Solas Impeller Shaft Holder WR014H
Impeller Shaft Holder
Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Typical top speed gains 3+ MPH over OEM Yamaha SHO or SVHO intercooler
Includes 50mm TiAL style or 35mm HKS style (your choice) blow off valve flange attached to the intercooler or select the blow off valve option of your choice
Typical peak RPM gains 250-300+, acceleration and throttle response
Kit Contents: The Fizzle Y1000 intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008 to present, including FZR, FZS, GP1800, FX SHO and SVHO models and supercharged Yamaha Jet Boats
WORX Insert Edition Sponsons for GP1800/VX
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
FOR 17+ GP1800 / 11+ VXR,VXS
Includes backing rails and all necessary hardware.
WE ARE EXCITED TO NOW OFFER A COMBO DEAL WITH A BRACKET SPEAKER COMBO , THESE ARE PRE-ORDERS STARTING 6\15, SO IT WILL TAKE AT LEAST 30 DAYS FOR SHIPPING, SO PLEASE KEEP THAT IN MIND WHEN ORDERING, YOU CAN SAVE MONEY WITH THE COMBO DEAL , PLEASE CHECK OUT THE LINK TO SEE MORE ABOUT THE SPEAKER.
V2 BRACKET ONLY WORKS ON YEARS 2008 TO CURRENT VX, GP1800, FX, AND EX
Solas Yamaha 160MM Concord 13/18 Impeller
The new Solas Concord YV-CD-13/18 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.
Solas Yamaha 160MM Concord 13/20 Impeller
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 13/20 variable pitch impeller works great with stock through Stage 2 modifications.
WORX Yamaha Free Flow Exhaust SHO/SVHO
Allows removal of restrictive sound suppression baffles in the exhaust.
This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.
This is a must for any modified personal watercraft.
WORX Yamaha Rear Exhaust Kit 2008-2018
Our 2008+ Yamaha GP1800 FX, FZ & 2015+ VXR/VXS rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.
Molded Black silicone hose for easy install Billet anodized black 3 inch exhaust outlet Billet anodized block off plate Eliminates restrictive sound suppression baffles Silicone hose reduces exhaust resonance and droning A must for High horsepower/ Race craft
WORX WR06028 YAMAHA DROP IN STEERING STEM GP1800, VX,VXR, EX
Constructed from Marine Grade 6061 Aluminum for superior strength
Retains original throttle/steering sensors
Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
Designed for racing and can be used for recreational, too
GP1800 2017+ | VXR/VXS 15+ | EX SERIES 17+
Cover plate and hardware included (cover plate for GP/VXR models only)
NGK LFR7A Spark Plugs - Yamaha SVHO Engines
NEW OEM Spark plugs for Yamaha 1.8L SVHO supercharged motors
WORX Yamaha 1.8L Dual cooling plate kit
Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into you Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
Billet anodized construction allowing 1,2 or 3 fittings to be installed
Fits all 1.8 Yamaha engines (may require o-ring for early models)
Allows for maximum cooling to the engine under high boost
Race proved in a closed course and endurance
WORX Intake Grate for GP1800/VXR,VXS
The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.
Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximizes acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all-around handling of this boat.
Worx Racing Components are proudly Australian made.
JL AUDIO SlamPak System for Yamaha VX WaveRunners - Black/White
Designed for Yamaha VX WaveRunners, this all-new system delivers a powerful audio option never before seen on PWC’s. This JL AUDIO® SlamPak® is sure to transform your WaveRunner into a serious music machine, adding even more enjoyment to every minute you spend on the water. A pair of waterproof VeX™ speaker pods house high-performance 6.5” marine-grade coaxial speakers that deliver loud, clean audio in real-world marine environments. Compact, 500 W, 4-channel amplifier powers the entire system. MBT-CRX Bluetooth® controller/receiver connects to your Bluetooth® device and accesses your playlist wirelessly.
Exceeds industry standards for corrosion resistance and UV-exposure. Also includes a plug-and-play harness with Deutsch connectors, marine-grade circuit breaker and cables, stainless steel mounting brackets, all hardware, and installation instructions. Dealer installation recommended.
Yamaha Flush Kit
The Replacement Flush Hose features a swivel hose fitting. These flush hoses fit all late-model WaveRunners and Yamaha Boats that were equipped with factory flush kits. Available in red or blue.
YAMAHA 160MM STAINLESS STEEL WEAR RING (REPLACES OEM # 6ET-51312-00-00)
100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble-free use. Directly replaces OEM part# 6ET-51312-00-00.
2008-2014 will need to use the updated 160mm Impeller
WORX Yamaha Fuel Pressure Reg 1.8L
In the tank, replacement increases fuel pressure approx 10psi
Cost effective alternative to External fuel regulator
Ideal for Low boost applications and reflashed/ aftermarket ECU
WORX Yamaha Pump Cooling Plate Dual
Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.
BRASS FITTINGS NOT INCLUDED.
WORX Yamaha Supercharger Rebuild Kit
Includes all bearing and plates that are not available to buy separately OEM
SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
WORX Yamaha 1.8L bar extension suit OEM bars/ODI grips
Billet anodized construction
Allows fitment of 130mm ODI lock grips
Billet endcap design to prevent grip sliding off if lock clamp fails
NOTE: Grips NOT Included
ARP Flywheel bolt kit
High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.
Suits all Yamaha 1.8 models
Suit SeaDoo 4-tec 1503 and 1630 ACE engine
Sold in Pack of 6
WORX Through hull fitting 1/2inc
Allows for easy installation of extra cooling lines. 1/2 inch.
2008+ FX, FX SHO, FZR, FZS, VXR, VXS
Tapered offset to match OEM reduction nozzle
Creates even pressure in reduction nozzle too reduce pump cavitation
Increased acceleration, drive and top speed
Suits all ‘3 bolt’ 1.8 Yamaha pump models
WR317 YAMAHA GP1800, 2015+VXR RIDE PLATE
Worx have created a ride plate that is more predictable on turn in, letting you enter the turn with more speed. It sets the ski up, keeps the back of the ski locked into the turn. The back of ski does not slide and fall through tight slow speed turns. You are able to maintain throttle through the turn and it will let you have a full trim range of the ski, making the ski more stable and predictable at high speed.
The High Performance, Reliable, self-bailing drain plug made specifically for your Yamaha Versiplug #1401 '04-'19 Yamaha '06-'19 Yamaha GPR
These DO NOT fit the Pre ‘07 Yamaha GPR. ‘00-‘06 GPR uses Yamaha plugs #1201
Also fit Honda, Polaris and most Kayaks with screw in drain plugs
To properly identify your plug please zoom on the threads for reference. Each Picture is of the actual plug for this model.
COLORS NOT LISTED: ANODIZED RED, GREEN,PINK,BLUE, PURPLE,YELLOW, AND ORANGE
BMS Racing Yamaha Titanium Valve Retainer Kit 1.8L SVHO/SHO
BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS.
All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors
Jet Trim Seat Cover for GP1800 | VXR
Fits 2017-2019 Yamaha FGP1800 and 2015-2019 VXR
Please call 800-940-3000 or email email@example.com custom orders.