Features:

• Constructed of Sur Last® high-performance Material
• Patented Vacu-Hold™ System to allow for Storage or Towing Capability
• Custom Fit & Finish

Description:
Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.
By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.
Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxilary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the sprak plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.
 

Worx Racing Intake Manifold adaptor allows for easy upgrade and fitment of additional Worx Racing or other aftermarket parts!

With this intake manifold adaptor you're easily able to fit your Worx Blow Off Valve line directly into your manifold without needing to cut your map line sensor hose as would be otherwise required. This part also allows for easy fitment of an aftermarket boost gauge or rising fuel rate regulator

Speaker Info:

• 60 watts
• Louder than competition
• More features ( Google Voice, Memory card tf Slot, Usb c Fast charging, Aux In )
• Dsp chipet Sound
• ip67 waterproof
• Tws pairing ( connect 2 speaker together)
• 3.0 hour charge time
• 8.0 continuous play back
• We strongly suggest the wireless puck with this speaker.

Description:

Our BMS Racing Waterbox delivers increased horsepower and performance by reducing exhaust restriction and back pressure. This Waterbox will increase the low-end power and mid-range pull on your Yamaha 1.8L watercraft. High-strength aluminum construction will survive backfires and meltdowns. Powder coated to prevent corrosion. This is must for and modified 1.8L engine.

Features:

• Increased horsepower on modified 1.8L watercraft!
• Domed end caps
• Ribbed tube flanges for reliable coupler retention.
• Powder coasted top prevent corrosion
• Increase in HP on modified engines with significant torque gains as well

FITS:

All Yamaha 1.8L SVHO, SHO, and HO model skis. 

CP Carrillo forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

Key Features Include:

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

 

 

SOLD AS A SET!

 

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

Key Features:

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for any kind of head and block combination. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

Custom-made glove box organizer specifically designed for the VX and FX Series WaveRunners.

Two Integrated zippered phone holder pockets
Removable Velcro dividers
Cutouts to allow access to WaveRunner outlets

FITS:

ALL Yamaha VX Models 2021-2022

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

Product Features:

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

We are so excited to introduce the soundwav120 these speakers are now available for purchase.. if you’re looking at adding us to one of your jet skis please find your jet ski make and model in our other products page under the shop. if you can’t find what you’re looking for please send That’s a message and we can help you get everything situated so you can get the correct bracket to match up with this incredible speaker.. ride safe ride loud

Features:

120W 6D stereo surround sound

1pcs DSP

2pcs vibrating diaphragm

4pcs built-in driver unit ( 2pcs bass driver unit + 2pcs Mids & Tweets )

5Play model (TF card slot ,U disk ,AUX ,Bluetooth,TWS connection)

WATERPROOF

Flush Adapter

The WaveRunner Pro Lanyard with Whistle features marine grade webbing with neoprene liner. Very comfortable and it floats for your convenience. Includes wrist strap coiled cord whistle and clip for stop switch. Fits all WaveRunner models (not suitable for Yamaha Boats). Multiple color options available.

BARE Yamaha Cylinder Head ASSY

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

 

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Honda
• Kawasaki
• SeaDoo
• Suzuki
• Yamaha

Carrillo connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

VXR Intake Manifold

Yamaha OEM head Gasket HO/SHO/SVHO

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

Key Features:

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

Key Features:

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

Carrillo Heavy-Duty connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

FITS:

Yamaha FX Cruiser HO 1.8L 2009-2021
Yamaha FX Cruiser SHO 1.8L 2008-2016
Yamaha FX Cruiser SVHO 1.8L 2014-2021
Yamaha FX Cruiser SVHO LTD 1.8L 2017-2021
Yamaha FX HO 1.8L 2009-2021
Yamaha FX SHO 1.8L 2008-2015
Yamaha FX SVHO 1.8L 2014-2021
Yamaha FZR 1.8L 2009-2016
Yamaha FZS 1.8L 2009-2016
Yamaha GP 1.8L 2017-2018
Yamaha GP-R 1.8L 2019
Yamaha GP-R HO 1.8L 2020
Yamaha GP-R SVHO 1.8L 2020
Yamaha VX Cruiser HO 1.8L 2016-2020
Yamaha VXR 1.8L 2011-2019
Yamaha VXS 1.8L 2011-2016