A must for any Modified/ High Horsepower application for maximum fuel delivery

Increased fuel delivery for high boost/ high RPM engines

Requires remapped ECU or Aftermarket ECU to operate

The kit comes with all required Hardware and adaptors (3 injector kits included)

Description 

Designed for full adjustability with the ideal position being dependent on the rider weight, riding style and the type of riding they are doing:
- For maximum top speed in calm water position your blades in the fully forward position
- For maximum handling and hook up the fully back position is best

Description 

The largest of the Kawasaki range, the STX introduced in 2000 as a two-stroke and then in later models fitted with the 12F and 15F four-stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the boat sliding out

Description

Worx Racing cast aluminum pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow the use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits all Yamaha Superjets and most aftermarket hulls.

Description 

Benefits Include:

- Specifically designed for the 2008 Superjet hull

- Better drive and control

- Greater stability 

Description 

• Tapered offset to match OEM reduction nozzle
• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘3 bolt’ 1.8 Yamaha pump models

Description 

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

Description 

SEADOO INTAKE GRATE GTR/GTS/GTI 11+

• Redesigned for maximum hook up in Rough water conditions
• Helps eliminate loose rear end handling
• Increase in acceleration and straight-line stability
• Reduced cavitation on take off
• Race proven design

Description 

Designed not just for a significant improvement in performance and safety but killer style!

Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski

Description 

Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.

This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.)

The Kit is easy to fit and provides an immediate improvement on stock.

Description 

Easily the first choice of Modification for you T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing, we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Our Stage 2 Kit delivers and increase of performance well over the tock levels. You will see a huge increase in acceleration and top speeds 15-18 MPH over stock.

Parts:

BMS Racing Stage 2 Tune 

WORX Racing Yamaha Air Filter Kit

WORX Racing Ribbon Delete

Fizzle Y1000 Intercooler Kit W/ BOV

WORX Racing Engine Cooling Kit

BMS Racing Titanium Valve Retainers

WORX Racing Free flow Exhaust

Solas YV-CD-13/18 Impeller

WORX Racing Ride Plate

Our Stage 1 Kit is a BMS Racing reflash with an air intake. You will see a huge improvement over acceleration and a top speed increase!

Stage 1 Tune

WORX Air Intake

Unlock the full potential of your watercraft with our BMS-Racing Stage 1 Kit

Includes:

* Stage 1 Tune

* WORX Cooling kit

* WORX Ribbon Delete

* WORX Air Intake

* Solas YV-CD 13/18

 93 Pump Gas

Please provide us with your email on your order, so we can give you instructions on shipping your ECU!

Call 954-467-0990 with any questions regarding our kits.

Unlock some serious power with out BMS-Racing Stage 2 Kit

Includes:

* Stage 2 Tune

* WORX Cooling kit

* WORX Ribbon Delete

* WORX Air Intake

* Solas YV-CD 13/18

* BMS Racing Blow Off Valve

* BMS Titanium Retainers

* WORX Breather Filter

 Premium 93 Pump Gas

Please provide us with your email on your order, so we can give you instructions on shipping your ECU!

Call 954-467-0990 with any questions regarding our kits.

Our Stage 2 Kit delivers and increase of performance well over the stock levels. You will see a huge increase in acceleration and top speeds of 15-18 MPH over stock.

Parts:

BMS Racing Stage 2 Tune 

WORX Racing Yamaha Air Filter Kit

Fizzle Y1000 Intercooler Kit W/ TiAL BOV

WORX Racing Engine Cooling Kit

BMS Racing Titanium Valve Retainers

WORX Racing Free flow Exhaust

Solas YV-CD-13/18 Impeller

WORX Racing Ride Plate

WORX Intake Grate

WORX Pump Seal

Our Stage 2 Kit delivers and increase of performance well over the stock levels. You will see a huge increase in acceleration and top speeds of 15-18 MPH over stock.

Parts:

BMS Racing Stage 2 Tune 

WORX Racing Yamaha Air Filter Kit

Fizzle Y1000 Intercooler Kit W/ TiAL BOV

WORX Racing Engine Cooling Kit

BMS Racing Titanium Valve Retainers

WORX Racing Free flow Exhaust

Solas YV-CD-13/18 Impeller

WORX Racing Ride Plate

WORX Intake Grate

WORX Pump Seal

The Better Way To Experience A Seadoo!

Looking to make your new Seadoo look a little less like your Grandma's ski?

It's time to upgrade to the brand new Worx Steering Kit for the 2020+ GTR & RXTX. This kit greatly improves riding ergonomics, with less strain on your wrists, meaning a much more comfortable ride. 

Constructed from Bulletproof Anodised Billet Aluminium, the steering stem provides much greater strength and durability when compared to the OEM plastic unit which is prone to failure in high stress environments. 

This kit includes everything you need to completely overhaul your steering!

Includes:

• ODI Grips
• ODI Handlebars
• Left Switch Housing
• Right Switch Housing
• Electronic Throttle Lever
• Reverse Lever
• Spiral Wrap
• 6 x Zip Ties

Instructions

Removable, floating, wireless Bluetooth footwell speakers with new EcoCast technology. Playtime: 50hrs at 50% volume, 10hrs at max volume. Available in black and white.

• Playtime: 50hrs at 50% volume, 10hrs at max volume
• Speaker Type: 3 speakers (5.25" woofer, 3.7" mid-range, 1" tweeter) in each housing
• Speaker Peak Power: 65W
• One-touch off

Description 

This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy. 

The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops proposing, the 'D' cut makes a big difference to the handling in several ways:
1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts, the 'D' cut out bites into the water pulling the boat back down which lets the pump get better hook-up and drive
2. When you are cornering hard the 'D' cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out

Description 

- Adjustable to suit your individual riding style and ability

- Constructed from Marine Grade Aluminium

- Suitable for ALL styles of riding!

- Also compatible with various aftermarket hulls

Description 

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Description 

• Billet Drive coupler for Yamaha 1.8 Engine
• Fits any 1.8 Yamaha Engine
• Billet construction huge strength upgrade over stock cast unit
• Utilizes OEM rubber coupler
• A must for any High Horsepower/ Race watercraft

BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS. 

Fitment:

All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors

• Vent Valve Cover Breather Filter
• Performance: improves up to 95% filtration efficiency.

Description:

Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.

By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.

Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxiliary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the spark plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.

Note: Solid tip plug. For use with Sea-Doo 300 Models

Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit.  Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.

-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry

- 4-Ply silicone hose

-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.

-Get greater reliability by reducing wear to your clutch and engine components.

-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.

NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020

Carrillo Heavy-Duty connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

Carrillo connecting rods improve the reliability and performance of turbocharged and supercharged watercraft engines. Manufactured to our specifications by Carrillo Industries, these rods are forged from an ultra high-strength alloy and rated to 500+ horsepower. Unique H-beam design is substantially stronger and lighter than OEM equipment, allowing your engine to rev quicker and hold up to the punishing demands of high boost applications. Includes high-strength silicon-bronze wrist pin bushing & race spec fasteners.

FIT:

2021 YAMAHA VX LIMITED HO (1.8L)
2021 YAMAHA VX CRUISER HO (1.8L)
2021 YAMAHA GP1800R HO
2021 YAMAHA FX SVHO
2021 YAMAHA FX LTD SVHO
2021 YAMAHA FX HO (1.8L)
2021 YAMAHA FX CRUISER SVHO
2021 YAMAHA FX CRUISER HO (1.8L)
2020 YAMAHA VX CRUISER HO (1.8L)
2020 YAMAHA GP1800R HO
2020 YAMAHA FX SVHO
2020 YAMAHA FX LTD SVHO
2020 YAMAHA FX HO (1.8L)
2020 YAMAHA FX CRUISER SVHO
2020 YAMAHA FX CRUISER HO (1.8L)
2019 YAMAHA VXR (1.8L)
2019 YAMAHA VX CRUISER HO (1.8L)
2019 YAMAHA GP1800R SVHO
2019 YAMAHA FX SVHO
2019 YAMAHA FX LTD SVHO
2019 YAMAHA FX HO (1.8L)
2019 YAMAHA FX CRUISER SVHO
2019 YAMAHA FX CRUISER HO (1.8L)
2018 YAMAHA VXR (1.8L)
2018 YAMAHA VX CRUISER HO (1.8L)
2018 YAMAHA GP1800
2018 YAMAHA FX SVHO
2018 YAMAHA FX HO (1.8L)
2018 YAMAHA FX CRUISER SVHO
2018 YAMAHA FX CRUISER HO (1.8L)
2017 YAMAHA VXR (1.8L)
2017 YAMAHA VX CRUISER HO (1.8L)
2017 YAMAHA GP1800
2017 YAMAHA FX SVHO
2017 YAMAHA FX HO (1.8L)
2017 YAMAHA FX CRUISER SVHO
2017 YAMAHA FX CRUISER HO (1.8L)
2016 YAMAHA VXS (1.8L)
2016 YAMAHA VXR (1.8L)
2016 YAMAHA VX CRUISER HO (1.8L)
2016 YAMAHA FZS
2016 YAMAHA FZR
2016 YAMAHA FX SVHO
2016 YAMAHA FX HO (1.8L)
2016 YAMAHA FX CRUISER SVHO
2016 YAMAHA FX CRUISER SHO (1.8L)
2016 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA VXS (1.8L)
2015 YAMAHA VXR (1.8L)
2015 YAMAHA FZS
2015 YAMAHA FZR
2015 YAMAHA FX SVHO
2015 YAMAHA FX SHO (1.8L)
2015 YAMAHA FX HO (1.8L)
2015 YAMAHA FX CRUISER SVHO
2015 YAMAHA FX CRUISER SHO (1.8L)
2015 YAMAHA FX CRUISER HO (1.8L)
2014 YAMAHA VXS (1.8L)
2014 YAMAHA VXR (1.8L)
2014 YAMAHA FZS
2014 YAMAHA FZR
2014 YAMAHA FX SVHO
2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SVHO
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA VXS (1.8L)
2013 YAMAHA VXR (1.8L)
2013 YAMAHA FZS
2013 YAMAHA FZR
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA VXS (1.8L)
2012 YAMAHA VXR (1.8L)
2012 YAMAHA FZS
2012 YAMAHA FZR
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)
2011 YAMAHA VXS (1.8L)
2011 YAMAHA VXR (1.8L)
2011 YAMAHA FZS
2011 YAMAHA FZR
2011 YAMAHA FX SHO (1.8L)
2011 YAMAHA FX HO (1.8L)
2011 YAMAHA FX CRUISER SHO (1.8L)
2011 YAMAHA FX CRUISER HO (1.8L)
2010 YAMAHA FZS
2010 YAMAHA FZR
2010 YAMAHA FX SHO (1.8L)
2010 YAMAHA FX HO (1.8L)
2010 YAMAHA FX CRUISER SHO (1.8L)
2010 YAMAHA FX CRUISER HO (1.8L)
2009 YAMAHA FZS
2009 YAMAHA FZR
2009 YAMAHA FX SHO (1.8L)
2009 YAMAHA FX HO (1.8L)
2009 YAMAHA FX CRUISER SHO (1.8L)
2009 YAMAHA FX CRUISER HO (1.8L)
2008 YAMAHA FX SHO (1.8L)
2008 YAMAHA FX CRUISER SHO (1.8L)

The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for any kind of head and block combination. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

CP Carrillo forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

SOLD AS A SET!

Description:

CP forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

Key Features Include:

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

Fits:

2021 SEA-DOO RXT-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2019 SEA-DOO RXT-X 300
2019 SEA-DOO RXP-X 300
2019 SEA-DOO GTX LIMITED 300
2018 SEA-DOO RXT-X 300
2018 SEA-DOO RXP-X 300
2018 SEA-DOO GTX LIMITED 300
2017 SEA-DOO RXT-X 300
2017 SEA-DOO RXP-X 300
2017 SEA-DOO GTX LIMITED 300
2016 SEA-DOO RXT-X 300
2016 SEA-DOO RXP-X 300
2016 SEA-DOO GTX LIMITED 300

Description 

Billet anodized construction

Fits 7/8 handlebars

Suits All style 4-tec DESS Posts

This engine cooling adapter allows you to deliver additional cooling water to the engine block. The cooling adapter is precision machined from billet aluminum and anodized for increased corrosion protection.

Fits all Yamaha 1.8L engines from 2008 to present.

Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized for increased corrosion protection. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing.

Fits all Sea-Doo watercraft equipped with a 159mm jet pump

Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized to help protect against corrosion. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing.

Fits all Yamaha 1.8L and 1.9L Yamaha watercraft 2008 to present

This blow off valve block-off kit includes an aluminum block-off plate, o-ring, and v-band clamp. It’s used to cover and seal off the 50mm blow off valve flange in the event that you decide to not use a blow off valve on your setup. This block-off kit is compatible with the 50mm flange that is included with certain Fizzle products, such as the Fizzle Yamaha Intercooler Kits and select Fizzle blow off valve kits for Sea-Doo and Yamaha.

This adapter mount allows you to install a Bosch oxygen sensor for tuning purposes onto any 2012 and newer Yamaha SVHO, SHO or HO watercraft. This adapter easily installs between the factory exhaust pipe and manifold. Included are new gaskets, stainless steel mounting bolts, and a stainless steel block-off plug with sealing washer to block-off the sensor when not in use. The adapter mount is precision machined from billet aluminum and anodized for increased corrosion protection.

Fits all 1.8L and 1.9L Yamaha HO, SHO and SVHO watercraft from 2012 to present

• Improve reliability and performance by replacing the soft and flimsy stock rubber intercooler hoses with the Fizzle heavy duty reinforced tubing kit for your Sea-Doo 300 watercraft. Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300.

• Replaces stock hoses that are prone to bursting under heavy boost pressure

• Increased throttle response

• 5-ply heavy duty silicone construction

• Internal metal reinforcement

• Easier to install than stock rubber hoses and aftermarket piping kits

• High-quality marine grade 316 Stainless Steel hose clamps included

• Compatible with stock Sea-Doo 300 Intercooler, Fizzle SuperCooler, or Riva Gen. 4 Intercooler

• Tested on a heavily modified closed course Sea-Doo 300 race jetski with 23 PSI supercharger

This supercharger shaft holding tool for Sea-Doo 300 HP watercraft allows you to lock the supercharger shaft in place in order to service the supercharger, change out the supercharger impeller wheel and check/set the clutch slip tension.

Fits all Sea-Doo 300 watercraft from 2016 to present    

Kit contents: Fizzle™ SuperCooler, Fizzle™ Sea-Doo 300 Intercooler Tubing Upgrade Kit, genuine 50mm TiAL Blow Off Valve, intercooler waterline fittings, hoses, zinc anode, and high quality marine grade 316 Stainless Steel hose clamps.

Direct replacement for full OEM Sea-Doo 300 HP intercooler system

Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

Eliminate intercooler heat fade

Utilizes stock intercooler location, works with stock exhaust system or aftermarket exhaust

Designed for maximum horsepower capacity

Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300.
Fits Sea-Doo 230 watercraft by adding a longer strap to secure the larger SuperCooler. OEM strap part number 293850093. We have them in stock so just write a note in the comments section of the order to include the longer strap.

Description

• Direct replacement for OEM Sea-Doo 300 HP intercoolers.

• Compatible with OEM Sea-Doo 300 HP rubber intercooler air hoses and Riva Gen. 4 intercooler piping kit

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Kit contents: Fizzle™ SuperCooler with waterline fittings and zinc anode

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Integrated zinc anode for added protection against corrosion

Description

• Kit contents: Fizzle™ SuperCooler and Fizzle™ Sea-Doo 300 Intercooler Tubing Upgrade Kit: Intercooler waterline fittings and zinc anode, complete set of heavy-duty 5-ply silicone tubing with internal metal reinforcement, high-quality marine grade 316 Stainless Steel hose clamps.

• Direct replacement for full OEM Sea-Doo 300 HP intercooler system

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300

Fizzle Z1 Supercharger Impeller

Increase top speed, acceleration and throttle response with the Fizzle Z1 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 96 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 3 PSI more boost pressure and 200-300+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!

The Fizzle Z1 Supercharger Impeller will boost 21+ PSI @ 9100 RPM and will max out at more than 23 PSI at higher RPM levels.

This is the most pump gas friendly of our supercharger impellers and is designed to give you that extra edge over a factory equipped ski.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.

Technical notes:

• All 3 Fizzle wheels weigh less than 100 grams each, giving them a more than 10% weight savings over the factory OEM billet wheel.
• All of the Fizzle supercharger wheels are drop-in wheels, meaning they do not need any modifications to the supercharger housing.
• Fueling requirements and fuel delivery upgrades will depend on the recommendations/requirements from whomever is tuning the ECU
• Boost pressure is directly tied to engine RPM, so the boost output will vary according the RPM that each ski is set up to run. For this reason, we use direct back-to-back test results against the factory supercharger output as a benchmark to compare to for all of our superchargers instead of labeling each wheel by a boost output number.

Fizzle Z2 Supercharger Impeller

Increase top speed, acceleration and throttle response with the Fizzle Z2 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 97 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 6 PSI more boost pressure and 400+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!

The Fizzle Z2 Supercharger Impeller will boost 24+ PSI @ 9300 RPM and will max out at more than 26 PSI at higher RPM levels.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.

Technical notes:

• All 3 Fizzle wheels weigh less than 100 grams each, giving them a more than 10% weight savings over the factory OEM billet wheel.
• All of the Fizzle supercharger wheels are drop-in wheels, meaning they do not need any modifications to the supercharger housing.
• Fueling requirements and fuel delivery upgrades will depend on the recommendations/requirements from whomever is tuning the ECU
• Boost pressure is directly tied to engine RPM, so the boost output will vary according the RPM that each ski is set up to run. For this reason, we use direct back-to-back test results against the factory supercharger output as a benchmark to compare to for all of our superchargers instead of labeling each wheel by a boost output number.

Fizzle Z3 Supercharger Impeller

Introducing the king of our drop-in supercharger impellers. Experience arm-stretching acceleration, blistering top speeds and instant throttle response with the Fizzle Z3 Supercharger Impeller! More torque and more horsepower = more fun!!

Weighing in at just 98 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!

Typical gains are 9 PSI more boost pressure and 600+ more RPMs over the OEM supercharger wheel and a more than
10% weight savings!

The Fizzle Z3 Supercharger Impeller will boost 27+ PSI @ 9500 RPM and will max out at more than 28 PSI at higher RPM
levels.

We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one

Technical notes:

• All 3 Fizzle wheels weigh less than 100 grams each, giving them a more than 10% weight savings over the factory OEM billet wheel.
• All of the Fizzle supercharger wheels are drop-in wheels, meaning they do not need any modifications to the supercharger housing.
• Fueling requirements and fuel delivery upgrades will depend on the recommendations/requirements from whomever is tuning the ECU
• Boost pressure is directly tied to engine RPM, so the boost output will vary according the RPM that each ski is set up to run. For this reason, we use direct back-to-back test results against the factory supercharger output as a benchmark to compare to for all of our superchargers instead of labeling each wheel by a boost output number.

Why buy?

• Go Faster (~3 MPH Speed Gain)
• Accelerate Harder
• Lightweight & Efficient
• Fast Guys Choose Fizzle!

With the Fizzle Supercharger you can Hit Harder, Weigh Lighter, and Be Unique!

Made out 100% marine grade aluminum.

Want to film your jet ski trips and review all the footage of your latest adventures? Trying to find the suitable mount for your GoPro Action Camera is challenging-- especially if you are looking for one for a specific jet ski model. But you are in luck because we have the right GoPro/360 mount just for your 2020-2024 SEADOO RXTX using the Bar Handle shown in the below pictures.