JP RACING INC ECU RE-Flash is a great way to get the most speed and performance out of your personal watercraft. Our RE-FLASH controls all the parameters of your ECU such as RPM limits, Fuel Maps, Ignition Timing, Throttle Response.

Our Re-Flash eliminates all the OEM speed limiter control. Modifying these components greatly improves throttle response and top end speed in a reliable and safe way. 

If you're not sure what Flash you need please email your modifications to AdamW@bms-racing.com

Mail in service - Wait for us to email you file to fill out for the re-flash service. Please include your email in your order. We will email you all the instructions on how to mail to us. 

Speeds:

RXP - 78+ MPH

RXT - 80+ MPH

Stage 1 Kit Includes: Mail In ECU Re-flash, JP Racing Intake, and JP Racing Oil Catch Can.

JP RACING INC Mail In ECU Re-Flash is a great way to get the most speed and performance out of your personal watercraft. Our FLASH controls all the parameters of your ecu such as RPM limits, Fuel Maps, Ignition Timing, Throttle Response.
Our Re-Flash eliminates all the OEM speed limiter control. Modifying these components greatly improves throttle response and top end speed in a reliable and safe way. Once purchased we will email you paperwork to fill out and how to send in. 

JP RACING INC Rear Air Intake System. The rear air intake system feeds your supercharged engine direct air delivering greatly improved acceleration and top speed. Replaces restrictive stock air box with a high-volume 4 inch Marine Grade JP RACING INC air filter. Simple installation & easy location gives you access to your entire engine compartment.

JP RACING INC Seadoo Oil Catch Can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing oil sludge coating that saturates inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. Kit includes breather filter, Stainless catch can and 3/4 hose to complete a 15min installation.

NOTE:

JP RACING INC strongly recommend the use of premium octane (91+) pump fuel in your PWC.

JP RACING INC recommends your wear ring, impeller, oil level and spark plugs be of correct working order for best results.

JP RACING INC  Stage Kits intended for competition use only, no warranties have been implied and you assume all risk modifying your PWC.

Speeds:

81+ MPH

Stage 1+ Kit Includes: Mail In ECU Re-flash, JP Racing Intake, JP Racing Oil Catch Can, Solas 13/18 Impeller, and Fizzle Intercooler Piping.

JP RACING INC Mail In ECU Re-Flash is a great way to get the most speed and performance out of your personal watercraft. Our FLASH controls all the parameters of your ecu such as RPM limits, Fuel Maps, Ignition Timing, Throttle Response.
Our Re-Flash eliminates all the OEM speed limiter control. Modifying these components greatly improves throttle response and top end speed in a reliable and safe way. Once purchased we will email you paperwork to fill out and how to send in. 

JP RACING INC Rear Air Intake System. The rear air intake system feeds your supercharged engine direct air delivering greatly improved acceleration and top speed. Replaces restrictive stock air box with a high-volume 4 inch Marine Grade JP RACING INC air filter. Simple installation & easy location gives you access to your entire engine compartment.

JP RACING INC Seadoo Oil Catch Can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing oil sludge coating that saturates inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. Kit includes breather filter, Stainless catch can and 3/4 hose to complete a 15min installation.

SOLAS SXX-CD-13/18 Impeller Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 300 HP PWC. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

FIZZLE FACTORY Intercooler Tubing Replace the stock rubber intercooler hoses that are prone to becoming soft and weak, leading to premature failure. Heavy duty 5-ply silicone construction with internal metal reinforcement. Includes high quality marine grade SS316 hose clamps.

SOLAS STAINLEES STEEL 161MM Wear Ring Stainless wear ring that is stronger then the OEM plastic. 

NOTE:

JP RACING INC strongly recommend the use of premium octane (91+) pump fuel in your PWC.

JP RACING INC recommends your wear ring, impeller, oil level and spark plugs be of correct working order for best results.

JP RACING INC  Stage Kits intended for competition use only, no warranties have been implied and you assume all risk modifying your PWC.

Our Worx Racing Seadoo RXPX and GTR Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

FITS:

2020+ GTR

2021+ RXPX

Only way to have a passenger on a stock RXP-X.

Two grab options for passengers, side and middle.
No tools required for installation – simply remove driver cushion, unclip base, clip on passenger seat.

Fits on

2021-2022 RXP-X

Our Air Intake System is designed to fit your supercharged  Sea-Doo 230/ 260/ 300 and Yamaha SHO/ SVHO model Watercraft. Eliminating the restrictive OEM air intake system will give your water craft not only the added acceleration you desire but also a sleek look to your water craft with added SUPERCHARGER NOISES!

• Increased acceleration & power with sweet supercharger noises!
• Marine grade washable and reusable Air Filter
• No hassle 3in direct to 4in mounting coupler
• Compatible with JP Racing Inc Oil Catch Can
• Convenient 10-15 min install time

FITS:

Sea-Doo Models- Supercharged 230/ 260/ 300 models

Yamaha SHO/ SVHO Models

Our oil catch can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing an oil sludge coating that saturates the inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. Our catch cans also have Stainless steel wool inside to help with oil sloshing.

*Make sure your oil level isn't overfilled. This will cause Excess crank case pressure, this will fill the oil catch can and may spill oil over into the hull. Keep oil level just under the  top bend of your oil stick.

Check and drain during your service interval. We recommend 25 hours.

Kit includes:

Black Breather Filter

Stainless Steel Catch Can

3/4 Hose

Brass Petcock drain

FITS:

Seadoo 300 Models

This is a sound suppression delete for the 2016+ RXPX/GTX/RXTX & 2020+ GTR230. This removes your stock sound suppression device and creates more room for upgrading your intercooler. This is comparable to any Free Flow exhaust kit.

FITS:

2016+ GTX

2016+ RXPX

2016+ RXTX

2020+ GTR

2021+ RXPX

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

DOES NOT FIT SPARK Models or New ST3 2018 model steering

NOTE: Grips NOT Included 

The High Performance, Reliable, self-bailing drain plug made specifically for your New Sea-Doo Anodized Black

This fits Sea-Doo Personal Watercraft from 2010 to 2019

To properly identify your plug please zoom on the threads for reference. Each Picture is of the actual plug for this model.

COLORS NOT LISTED: ANODIZED RED, GREEN, PINK, BLUE, PURPLE, YELLOW, AND 

ORANGE

Features

Description 

Full set of 12 CNC machined retainers manufactured from high strength and hardened aerospace certified titanium alloy. Designed to add strength while offering weight reduction, all of our titanium retainers are finished to precise tolerances.

A must for any Sea-Doo looking to rev over 8400 rpm

Perfect to use in combination with any 8400+ rpm tune

Suits ALL Sea-Doo 4-Tec 1503cc and ACE 1630cc Engines

Description 

WORX Racing NEW Sea-Doo 4-tec Intake manifold Girdle kit provides added strength to the Sea-Doo intake manifolds. The Bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the join in the manifold that splits under higher boost pressures on skis with aftermarket superchargers or running higher rpm’s.

Description:

CP forged racing pistons deliver maximum reliability and performance in high boost supercharged & turbo applications. High strength piston kits include premium ring package, tool steel wrist pin & carbon steel wire locks. Sold individually.

Key Features Include:

• CNC machined from high strength/lightweight forgings.
• Optimized dome design for efficient combustion.
• Improved lubrication hole placement for reduced friction.
• Premium low friction ring package.
• High-strength tool steel wrist pins machined from special tool steel bar stock & heat treated.
• Carbon steel wire locks.

Fits:

2021 SEA-DOO RXT-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2019 SEA-DOO RXT-X 300
2019 SEA-DOO RXP-X 300
2019 SEA-DOO GTX LIMITED 300
2018 SEA-DOO RXT-X 300
2018 SEA-DOO RXP-X 300
2018 SEA-DOO GTX LIMITED 300
2017 SEA-DOO RXT-X 300
2017 SEA-DOO RXP-X 300
2017 SEA-DOO GTX LIMITED 300
2016 SEA-DOO RXT-X 300
2016 SEA-DOO RXP-X 300
2016 SEA-DOO GTX LIMITED 300

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Honda
• Kawasaki
• SeaDoo
• Suzuki
• Yamaha

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Honda
• Kawasaki
• SeaDoo
• Suzuki
• Yamaha

Practically positioned in an easily accessible location in front compartment.
Keep your small items dry in splash-proof inner pocket.
External mesh pocket allows you to store more items while keeping them in view.
1.6 US Gal (6 L) volume.

Fits on

GTI, GTI SE , GTR and WAKE 170 (2020 and up) / RXP-X (2021)

Replaces stock fixed extrusion to allow vertical adjustment length of +5/8” to 3 5/8” (+16mm to 92 mm) from stock.
Ergonomically better in stand-up riding position.
Includes all hardware required for installation.

Fits on

2021 RXP-X

Description:

Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.

By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.

Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxiliary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the spark plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.

Note: Solid tip plug. For use with Sea-Doo 300 Models

Retractable boarding step designed for your watercraft.
Makes boarding from the water much easier.
Spring-loaded platform that stays in the ''up'' position.
Direct bolt-on installation, thanks to integrated mounting points on the watercraft.

Fits on:

RXT, RXT-X, GTX and WAKE PRO (2018 and up) / GTI, GTI SE, GTR and WAKE 170 (2020 and up) / RXP-X (2021)

Description:

Add 5.3 US Gal (20 L) of extra storage to your existing 13.5 US Gal (51 L) cooler. Fully insulated and easy to install. Ideal, e.g., for separating your lunch from your catch or a seperate tackle box. Requires LinQ 13.5 US gal (51 L) Cooler (Double Latch) (269801151) for installation.

Fits On: Fits on all LinQ with 16'' Base

Description:

Versatile LinQ storage solution with up to 40 L (10.5 US Gal) of added storage. Heavy-duty construction with high-quality zippers and water resistant outer shell. Easy-access large roll-top opening. Reversible integrated flap with water-resistant storage. Integrated vehicle key holder. Waterproof removable liner with integrated pocket and laptop storage. Backpack Option includes adjustable, removable shoulder system, ergo-fitted back padding and lightweight shoulder system design.

Fits On: Fits on all LinQ with 16'' Base

Description:

Fully waterproof roll-top design secures gear tightly. 10.6 US Gal (40 L) of adjustable capacity. Heavy-duty rigid plastic base. Foam-lined bottom for additional protection. Integrated handle for easy transportation on/off the vehicle. Equipped with Marinized LinQ Hardware Kit.

Fits On: Fits on all LinQ with 16'' Base

Description:

Insulated liner Fits very well in the LinQ Modular Box (10 L). Can contain five 473 ml cans or six 355 ml cans.

Fits On: Fits on all LinQ with 16'' Base

Description:

Simple way to securely lock most LinQ accessories to your watercraft. Lock cover protects lock from the elements. Corrosion resistant. Pack of 2, includes 4 keys.

Fits On: Fits on all LinQ with 16'' Base

This Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 300 HP PWCs. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Fits:

Sea-DooGTR 230 2020
Sea-DooGTX 230 2020
Sea-DooGTX LTD 300 2016-2020
Sea-DooGTX P LTD 300 2018
Sea-DooRXP P X 300 2018
Sea-DooRXP P XRS 300 2018
Sea-DooRXP X 300 2016-2020
Sea-DooRXP XRS 300 2017-2020
Sea-DooRXT P X 300 2018
Sea-DooRXT P XRS 300 2018
Sea-DooRXT X 300 2016-2020
Sea-DooRXT XRS 300 2017-2020
Sea-DooWake Pro 230 2020