Unlock the full potential of your watercraft with our ECU Reprogramming Service.
Flash tuning is a process where your watercraft ECU can be re-programmed, to obtain the full potential of your watercraft engine.
Upgraded tuning parameters:
Increase Horsepower by improved fuel and timing maps
No engine internal modifications required
Improve throttle response
Enhance efficiency through all RPM
Increase rev limiters
Increase torque through entire powerband
Improve throttle control & reaction
Increase top speed
For 93 octane pump fuel
Please specify your modifications and performance goals.
PLEASE NOTE: This is an ECU reflash service performed on your stock ECU.
Once you place your order please wait for an email from our C.M.S Customer Service Team with details on where to ship your ECU and a form to be sent with it.
C.M.S. will perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.
SOLAS SEA-DOO SPARK CONCORD 12/14 IMPELLER
20-8068
Regular price
$280.00
Sale price
$279.00
Save $1.00
The new Solas Concord SK-CD-12/14 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 12/14 variable pitch impeller was designed for a modified craft that requires increased RPMs.
**Works with modified 90hp SPARK models only**
WORX Seadoo Spark Ribbon Remover
WR04023
Regular price
$38.00
Save $-38.00
Description
It increases air flow to the engine, maximizing horsepower.
Constructed from billet for extra durability and strength
Tapered design to allow more air flow
WORX Seadoo Spark Intake grate
WR244
Regular price
$240.00
Save $-240.00
Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better. Partner it up with the Spark pump plug Kit and you're really moving.
This intake grate is a must-have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximize overall handling and hook up in all water conditions.
Increased acceleration and drive
Reduced cavitation with increased efficiency
Increase stability through cornering and rough water
IJSBA legal in all classes
Suits both 2/3 up models
WORX WR0707 Pump Seal Kit Seadoo Spark
WR0707
Regular price
$85.00
Save $-85.00
Description
Pump Seal Kit to suit Intake Grate WR244.
Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.
WORX Racing Sea-Doo Spark Sponsons WR555-I
WR555-I
Regular price
$310.00
Save $-310.00
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
Includes backing rails and all necessary hardware.
Product benefits include:
Greater cornering ability and more straight-line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race-proven performance
WORX Seadoo Spark Free Flow Exhaust
WR04008
Regular price
$225.00
Save $-225.00
WORX Racing Components performance exhaust allows removal of restrictive STD exhaust baffle for increased performance and great exhaust note. Kit easily installs using OEM exhaust exit location.
Increased throttle response and reduced back pressure
Lightweight molded silicone hose
Easy install with all hardware provided in the kit
Suits 2 and 3 seater style sparks models including IBR models
WORX WR04004 Rear Exhaust Kit Seadoo Spark
WR04004
Regular price
$299.00
Save $-299.00
WORX Racing Components performance exhaust allows removal of restrictive STD exhaust baffle for increased performance and great exhaust note. Our Billet anodized rear exhaust outlet gives your ski a great performance look.
Increased throttle response through the rpm range
Lightweight molded silicone hose
Billet anodize rear Exhaust outlet
Easy install with all hardware provided in the kit
Suits 2 seater style sparks only(DOES NOT FIT 3 SEATER MODELS)
WORX WR04008 will suit 3 seater Spark models
WORX Seadoo Spark Ride Plate
WR319
Regular price
$240.00
Save $-240.00
Description
Transform your Seadoo Spark in all water conditions improving drive, control, and stability! A simple must have addition for anyone wanting top performance from this fun machine!
Race proven Seadoo Spark extended ride plate
Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
Increase handling characteristics throughout cornering
Better straight line drive and added stability
Redesigned stepped centre section for increase top speeds...
Easy fitment using standard mounting points.
IJSBA legal all classes....
DOES NOT SUIT IBR MODELS
SOLAS SOLAS WEAR RING S-D SPARK STAINLESS
20-35022
Regular price
$153.50
Save $-153.50
Solas Spark Wear Ring 140mm.
Replaces the factory plastic ones.
SOLAS SEA-DOO SPARK CONCORD 12/17 IMPELLER
20-8066
Regular price
$280.00
Sale price
$249.99
Save $30.01
The new Solas Concord SK-CD-12/17 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 12/17 variable pitch impeller was designed for both stock and mildly modified craft.
**Works with 90hp SPARK models only**
SEA-DOO SPARK 2014+ BRP AUDIO-PORTABLE SYSTEM SUPPORT BASE
295100913
Regular price
$54.99
Save $-54.99
A recipe for a great summer starts with a Sea-Doo Spark. To add a little music to your Spark Adventures, you may want the BRP Audio-Portable System. This Audio System Support Base for the 2014+ Sea-Doo Spark is required to install the BRP Audio System in your Spark. This support base makes it possible to mount the audio system to the front of your Spark for easy access to your favorite tunes.
Required to install the BRP Audio-Portable System:
SEA-DOO SPARK 2014+ BRP AUDIO-PORTABLE SYSTEM
295100797
Regular price
$682.75
Save $-682.75
Your music, anywhere Listen to your music in, on, or off the water with our portable, removable, and fully submersible audio system.
50 Watt audio system with Bluetooth† connectivity.
Powered with a rechargeable lithium battery that offers 24 hours* of autonomy.
Fully-submersible and removable, can be used on and off the watercraft.
The control pad on the speaker for volume and song adjustment. Front mounted and positioned toward the driver for maximum sound clarity.
Based on BRP internal testing at approximately 50% volume. Battery life may vary depending on operating conditions, including but not limited to the temperature.
Sea-Doo Spark Bilge Pump Kit 295100497
295100497
Regular price
$154.99
Save $-154.99
Keeps engine compartment dry. Includes 460 gph bilge pump, stainless steel mounting bracket, bilge fitting, hose and hardware necessary for installation.
WORX SeaDoo Spark Steering system with Electronic lever KIT
WR06014-ET-KIT
Regular price
$735.00
Save $-735.00
Description
WR06014-ET-KIT
- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)
NEW REVISED DESIGN!
- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips.Everything included converting your steering. - Retains all OEM functions. - Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars. - Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding). - Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip
WORX Through hull fitting 1/2inc
WR06004
Regular price
$27.00
Save $-27.00
Description
Allows for easy installation of extra cooling lines. 1/2 inch.
WORX Sea-Doo Electronic IBR Lever assy
WR06011
Regular price
$185.00
Save $-185.00
Description
WORX Racing All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilizes OEM electronic actuators up on the handlebars (no throttle cables required),
- Billet anodized construction
- Utilizes OEM electronic actuator which drops into new housing for OEM electronic trigger feel
- Suits all Sea-Doo models with iBR
- Clamp-on Handlebar design allows for adjustability of throttle position and angle
WORX Sea-Doo Electronic Throttle Lever assy
WR06010
Regular price
$185.00
Save $-185.00
Description
WORX Racing All NEW Billet Anodised Throttle Electronic actuator housing which utilizes OEM electronic actuators up on the handlebars (no throttle cables required),
- Billet anodized construction
- Utilizes OEM electronic actuator which drops into new housing for OEM electronic trigger feel
- Suits all Sea-Doo models with iTC
- Clamp-on Handlebar design allows for adjustability of throttle position and angle
WORX Sea-Doo Left Switch panel holder
WR06013
Regular price
$185.00
Save $-185.00
Description
New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.
- Adjustable to suit riding hand positions for ultimate control
- OEM switch panel drops straight in (requires NO modifications)
- Also holds Start/stop switch and button
- Will suits Sea-Doo Sparks with optional VTS fitted
- For use with aftermarket handlebars combined with WORX Racing Steering System
DESS Post Holder
WR06025
Regular price
$48.40
Save $-48.40
Description
Billet anodized construction
Fits 7/8 handlebars
Suits All style 4-tec DESS Posts
WORX SeaDoo Start/Stop Switch holder
WR06015
Regular price
$85.00
Save $-85.00
Description
Sea-Doo Start/ Stop switch housing
- Solid billet anodized construction
- Utilizes small Sea-Doo Switch panel and late model (thick) red button
- 2 piece bar clamp style for adjustability
- Great for start/stop button on custom skis/ launch control button etc
- Can be used on either side of handlebars
WORX SeaDoo Spark Steering system with Electronic lever
WR06014-ET
Regular price
$599.00
Save $-599.00
Description
WR06014-ET
NEW REVISED DESIGN!
- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware. - Retains all OEM functions. - Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars. - Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding). - Allows you to use higher quality aftermarket 7/8" diameter handlebars to a bend that suits your riding style.
WORX SeaDoo Spark Steering system with IBR
WR06014-IBR
Regular price
$850.00
Save $-850.00
Description
WR06014-iBR-KIT
NEW REVISED DESIGN!
- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)
Includes WORX All NEW Billet anodized Electronic throttle lever and brake lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering. - Retains all OEM functions. - Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars. - Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding). - Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip
WR04026 SEADOO SPARK AIR FILTER KIT
WR04026
Regular price
$168.00
Save $-168.00
Our new Air Filter Kit for Seadoo Spark increases throttle response and overall power by opening up and allowing more air flow over the more restrictive OEM air box.
Includes: Anodised alloy tube, high-temp silicone coupler, US Coast Guard Approved marine grade Air Filter element, stainless steel hose clamps.
Suits ALL Spark models.
Install requires tools, we suggest taking a look at the install instructions before purchase to ensure you have what you will need.
Design delivers better protection and great style.
Protection from cold wind and water splashes.
Sold in pairs.
Compatibility
GTX, RXT, RXT-X, and WAKE PRO (2010 and up), GTI, GTS and WAKE (2011 and up), GTR and RXP-X (2012 and up), SPARK (2014 and up)
Ergolock Knee Pads for SPARK
295100810
Regular price
$134.99
Save $-134.99
Features
Allow you to rest your knees on a comfortable pad.
Help keep your legs locked in place on the Ergolock System.
To be combined with the Floorboard Wedges for improved balance on the vehicle.
Compatibility
SPARK
NGK CR8EB STANDARD SPARK PLUG - Yamaha 3 Cylinder Engines
2-CR8EB
Regular price
$6.95
Save $-6.95
NGK Standard spark plugs are OE approved and recommended for reliable performance for most automotive and non-automotive applications. NGK Standard spark plugs feature a 5-Rib insulator design to prevent flashover and are also treated with corrosion-resistant plating to ensure ease of installation and removal. Cold rolled threads prevent damage to cylinder head. NGK's triple gasket sealing process virtually eliminates gas leakage past the shell. Solid Copper Core provides superior heat dissipation, conductivity and a broader heat range.
Key Features:
Solid copper core for greater spark
Longer insulator nose prevents fouling
Corrugated ribs on insulator prevents flashover
Zinc dipped shell prevents corrosion
Triple gasket seal eliminates combustion gas leakage
Synthetic Jet Pump Oil uses a unique combination of synthetic base stocks and additives that allow higher loads, superior shear stability and reduced oxidation compared to other synthetics and conventional APl GL-5 oils.
Recommended for use in Sea-Doo jet pump requiring oil.
XPS Synthetic Grease (14 oz. / 400 g) 779162
779162
Regular price
$22.99
Save $-22.99
Features
Recommended for marine applications.
This synthetic grease provides the best wear protection and water resistance available.
SEA-DOO SPARK EXTENDED RANGE VARIABLE TRIM SYSTEM (VTS) FOR IBR
295100704
Regular price
$204.99
Save $-204.99
Description
Provides preset positions for quick settings when adjusting the watercraft trim. When you trim up, you'll have a drier ride, which helps when towing. When you trim down, you can ride more aggressively while staying glued to the water.
Features
This Sea-Doo exclusive accessory lets you exaggerate how high you can raise the nose or how deep you can bury it in the water.
The extended range VTS doubles the range of adjustment compared to our current standard VTS.
Adjustments are instantaneous thanks to the quick activation switch mounted on the handlebar to allow fine tuning of the watercraft trim angle while riding.
Simple plug-in connection, and includes switch, cap and hardware necessary for installation.
Standard on SPARK TRIXX.
Compatibility
SPARK with iBR (2017 and up - full extended range), (2016 and prior - stock range)
Sea-Doo Spark Variable Trim System (VTS) - 2014-2016 w/ IBR
295100630
Regular price
$219.99
Save $-219.99
Activates and provides instantaneous VTS adjustment. Switch mounted on handlebar allows fi ne tuning of watercraft trim angle while riding. Simple plug-in connection. Includes switch, cap and hardware necessary for installation.