DESCRIPTION

The Pwc Bracket is the latest and greatest when is comes to having your tunes on the water. Made from very sturdy material to make sure you are getting the best bang for your buck. It comes in an assortment of colors and styles.

We strongly suggest purchasing the SOUNDWAV60 speaker along with this bracket.

Our Air Intake System is designed to fit your supercharged  Sea-Doo 230/ 260/ 300 and Yamaha SHO/ SVHO model Watercraft. Eliminating the restrictive OEM air intake system will give your water craft not only the added acceleration you desire but also a sleek look to your water craft with added SUPERCHARGER NOISES!

• Increased acceleration & power with sweet supercharger noises!
• Marine grade washable and reusable Air Filter
• No hassle 3in direct to 4in mounting coupler
• Compatible with JP Racing Inc Oil Catch Can
• Convenient 10-15 min install time

FITS:

Sea-Doo Models- Supercharged 230/ 260/ 300 models - 2023+

Yamaha SHO/ SVHO Models - 2023+

For adding an extra rod holder up front for trolling while on the move.
Also features area for integrating a LinQ Cup Holder (295100935).
Installable left, right, or both sides.

Fits on

RXT, RXT-X, GTX, WAKE PRO (2018 and up) / Fish Pro (2019) Or any vehicle with the 51L cooler

Our oil catch can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing an oil sludge coating that saturates the inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. Our catch cans also have Stainless steel wool inside to help with oil sloshing.

*Make sure your oil level isn't overfilled. This will cause Excess crank case pressure, this will fill the oil catch can and may spill oil over into the hull. Keep oil level just under the  top bend of your oil stick.

Check and drain during your service interval. We recommend 25 hours.

Kit includes:

Black Breather Filter

Stainless Steel Catch Can

3/4 Hose

Brass Petcock drain

FITS:

Seadoo 300 Models

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Made out 100% marine grade aluminum.

Powder Coating colors options.

This Bracket is ready to install on the two front cover factory screws.

Go Pro mount included, all you need is your Go Pro camera, there is no need to buy any extra parts or accessories.

Use the pre-drilled hole in the Base to secure your camera using a string of your preference.

Colors are a close match to Seadoo PWC. 

Take your audio experience to the next level with this FX Subwoofer. Easy installation under the rear seat. This Subwoofer delivers a nice punch to enhance the audio experience.  Powered by the WaveRunner battery, but quickly connects via Bluetooth to the EcoXGear Speakers. * 2019 or 2020 Yamaha Exclusive EcoXGear Bluetooth FX Speakers required.

FITMENT:

This Extended Range VTS Ramp Kit V2 was developed due to the lack of options on the market. This kit is designed to increase the angle of your VTS, allowing you to do wheelies with ease!

This Version 2 kit gives you the same operating range as the Trixx! Installation is easy, and requires slight trimming of the venturi or swap out to a 2017+ venturi for no modification at all. See instructions below. This works for both 2up and 3up models. This kit will simply give your Spark maximum range with your existing pump parts, and allow you to rediscover fun with your 2014-2016 Spark.

Yamaha exclusive EcoXGear® Bluetooth® speakers, custom cup holder mounts and supporting hardware for FX WaveRunners.

• IP67 Waterproof / Shock resistant / Floating
• 30W 4” woofer + separate tweeter for dynamic frequency response
• 12-17 hours of playtime
• Marine-grade materials
• EcoTalk button for easy activation of Siri & Google voice
• EcoConnect paired out of the box for stereo listening; possible to de-pair and use independently
• One-touch off - turn off one speaker, other goes off too
• Bluetooth 4.2 streams wirelessly from up to 100 feet away
• Includes custom mount for FX unit integrated installation

Fits:

Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas

Increases trim range to bring the nose of your ski higher and increase speed!

Note: Only Suits Yamaha Models WITH RiDE 

Click Here To Download WR06021 Instructions

Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit.  Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.

-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry

- 4-Ply silicone hose

-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.

-Get greater reliability by reducing wear to your clutch and engine components.

-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.

NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020

Description:

Our BMS Racing Waterbox delivers increased horsepower and performance by reducing exhaust restriction and back pressure. The short design allows easy servicing of supercharger without removal of exhaust system. High-strength aluminum construction & precision welds will withstand backfires & overheating. Anodized to prevent corrosion.

Key Features:

• Will deliver up to 10hp on modified watercraft
• Ribbed tube flanges for reliable coupler retention.
• Radiused exhaust tubes & end caps.
• Anodized grey to prevent corrosion.
• Fits all Sea-Doo 2020+ models with 1630 engine.

Fits:

2022 SEA-DOO WAKE PRO 230
2022 SEA-DOO RXT-X 300
2022 SEA-DOO RXP-X 300
2022 SEA-DOO GTX 300
2022 SEA-DOO GTX 230
2022 SEA-DOO GTR 230
2022 SEA-DOO GTI SE 170
2022 SEA-DOO GTI SE 130
2022 SEA-DOO GTI 130
2021 SEA-DOO WAKE PRO 230
2021 SEA-DOO RXT-X 300
2021 SEA-DOO RXP-X 300
2021 SEA-DOO GTX LIMITED 300
2021 SEA-DOO GTX 300
2021 SEA-DOO GTX 230
2021 SEA-DOO GTR 230
2021 SEA-DOO GTI SE 170
2021 SEA-DOO GTI SE 130
2021 SEA-DOO GTI 130
2020 SEA-DOO WAKE PRO 230
2020 SEA-DOO RXT-X 300
2020 SEA-DOO RXP-X 300
2020 SEA-DOO GTX LIMITED 300
2020 SEA-DOO GTX LIMITED 230
2020 SEA-DOO GTX 230
2020 SEA-DOO GTX 170
2020 SEA-DOO GTR 230
2020 SEA-DOO GTI SE 170
2020 SEA-DOO GTI SE 130 (IBR)
2020 SEA-DOO GTI 130 (IBR)

Custom-made glove box organizer specifically designed for the VX and FX Series WaveRunners.

Two Integrated zippered phone holder pockets
Removable Velcro dividers
Cutouts to allow access to WaveRunner outlets

FITS:

Yamaha FX Models 2019-2022

Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Description

LinQ System: Fast. Easy. Secure. The LinQ accessories now fit all platforms. Nothing outdoes our exclusive quick-attach, tool-less rear-cargo LinQ System. It redefines what your watercraft can carry, and how it carries them. You get to pack more, play more, and ride farther, all while keeping food and drink cold and fresh.

Features

Designed for easy pouring.
4 US Gal (15 L) capacity.
Allows the SR 21 L LinQ Bag or the LinQ Sport Bag to stack on top for more storage.
Already marinized for saltwater purposes.
LinQ Cargo Base Kit included.
Note: Fuel caddies cannot be stacked.

Sea-Doo Switch: Quickly and easy, secure installation with the LinQ accessory system. No-spill spout designed for easy pouring. 3.8 US Gal (14.5 L) capacity. Allows for added storage by stacking LinQ Watertight Bag (715008110). Marinized for saltwater use. Note: Fuel caddies cannot be stacked. Stacking LinQ Watertight Bag requires LinQ Base Installation kit (295101009).

Fits On:

Models with LinQ Base Kit

New 27-Sprag Yamaha Genuine OEM replacement supercharger clutch for all Yamaha 1.8L Supercharged engines features larger, heavy-duty sprag for greater durability. Includes low-profile, button-head bolts (2) for cam chain guide. Backwards compatible to 6ET-17800-10-00.

2008-2012 engines require updated drive gear 99999-04107-00. All require new OEM oil pump assembly gasket (part# 6S5-13563-00-00).

Description:

Add 5.3 US Gal (20 L) of extra storage to your existing 13.5 US Gal (51 L) cooler. Fully insulated and easy to install. Ideal, e.g., for separating your lunch from your catch or a seperate tackle box. Requires LinQ 13.5 US gal (51 L) Cooler (Double Latch) (269801151) for installation.

Fits On: Fits on all LinQ with 16'' Base

Currently on Backorder

Description:

Adds 18 inches of platform space to the rear of the watercraft, outside the railing. Easy access to water for swimming, tubing and other watersports. Includes 2 retractable LinQ attachment points to allow for easy LinQ accessory installation and stow out of the way when not in use. Allows for use of Adjustable Table accessory for true waterfront dining. Compatible with Quick Attach Inflatable Holder to store inflatables. Standard on Switch Sport 18 and 21 models and Switch Cruise 18 and 21 models.

Fits on: Switch, Switch Cruise, Switch Sport

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware 

NOTE: Grips NOT Included 

Features:

• Constructed of Sur Last® high-performance Material
• Patented Vacu-Hold™ System to allow for Storage or Towing Capability
• Custom Fit & Finish

**PLEASE NOTE THESE PUMPS ARE NOT IN STOCK AND MAY BE ON BACKORDER THROUGH YAMAHA**

Upgrade your SHVO/SHO pump to the new 2020 SVHO pump!

The new 2020 SVHO pump has a 160mm stator. The 2020 SVHO pump uses a one piece housing for both the impeller and wear ring.

The kit will include all bearings, o-rings, oil seals, and spacer you need to transfer your existing driveshaft over to the new 2020 pump housing.

PLEASE TAKE NOTE: If you have an SHO ski you will need to purchase a SVHO driveshaft separately for this to work. Please email us info@bms-racing.com if you have a SHO and need a driveshaft.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the 2019 Yamaha FX 

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not      throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Includes backing rails and all necessary hardware.

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

FOR 17+ GP1800 / 11+ VXR,VXS

Includes backing rails and all necessary hardware.

Product benefits include:

- Greater stability

- Improved cornering

- Superior handling

This Solas 161mm 3-blade Concord Impeller increases low-end thrust and top-end speed on Sea-Doo 300 HP PWCs. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Fits:

Sea-DooGTR 230 2020
Sea-DooGTX 230 2020
Sea-DooGTX LTD 300 2016-2020
Sea-DooGTX P LTD 300 2018
Sea-DooRXP P X 300 2018
Sea-DooRXP P XRS 300 2018
Sea-DooRXP X 300 2016-2020
Sea-DooRXP XRS 300 2017-2020
Sea-DooRXT P X 300 2018
Sea-DooRXT P XRS 300 2018
Sea-DooRXT X 300 2016-2020
Sea-DooRXT XRS 300 2017-2020
Sea-DooWake Pro 230 2020

Looking to add extra grip to your lake-ride or race-ski? Hydro-Turf mats are specially made with a unique textured design for added traction and are made of durable, thick, high-density, water resistant, UV resistant, easy to install peel and stick foam material.

Hydroturf mats feature a deeply grooved, no absorbent, non-slip surface for supreme comfort, excellent grip, maximum traction, and ultimate performance. Whether you need racing tray mats, freestyle tray mats or just recreational mats – Hydro-Turf mats offer excellent grip and footing in the slippery foot wells of your personal watercraft. Hydro-turf traction allows you to push harder and take your riding to the next level.

All HydroTurf mats come equipped with Super tough high-grade 3M Peel & Stick PSA (Pressure Sensitive Adhesive). Simply peel off the sticker backing and apply pressure to the mat to adhere it to your watercraft footwells & rear deck. While not mandatory, we recommend allowing the adhesive to set for around 12-24 hours after adhesion for best results.

Hydro-Turf mats also come in a variety of colors and grooves for your personal watercraft. All mats are available with grooves in either Cut Groove or Cut Diamond, with hundreds of color combinations available in each cut. Hydroturf colors come in duo-tone (color with black or white grooves), marbled, camo pattern, or flat color. With hundreds of mats variations available for any year, make, and model, there is no limit to the amount of customizability available for your watercraft.

• Superior Traction for Performance Riding.
• Hundreds of Custom Colors & Groove Patterns
• Superior Strength 3M PSA (Pressure Sensitive Adhesion).
• Available for all Yamaha, Sea-Doo, Kawasaki, & Honda PWCs

Note: Images are an approximate rendering of the final product. Color or location of the logo may vary depending on the manufacturing process. Hydro-Turf colors may look different in various lighting conditions. Hydro-Turf will not warranty the following colors from fading (Lime Green, Orange, Red, Pink, Yellow, and Yellow Camo). With hundreds of colors, patterns, grooves, and styles there is something here for everyone.

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must-have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximize overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

New Yamaha Genuine OEM replacement supercharger clutch. Used on all 2021 Yamaha 1.8L SVHO engines. Upgrade your clutch on your 2008 and newer SHO or SVHO ski.

Please note, 2008-2012 skis will require updated drive gear 6S5-W1783-20-00 which is available in our factory replacement parts section of the store.

2 x Part number 92014-06030-00 is required when installing on all 2020 and prior skis.

LinQ System: Fast. Easy. Secure. The LinQ accessories now fit all platforms. Nothing outdoes our exclusive quick-attach, tool-less rear-cargo LinQ System. It redefines what your watercraft can carry, and how it carries them. You get to pack more, play more, and ride farther, all while keeping food and drink cold and fresh.

Features
LinQ mounted weather-resistant, high-volume cooler. Includes many fishing-related features, including the heavy-duty storage pocket, lid with recessed work surface, quick-attach rod holder system, trolling slots and easy latch lid.

Also features drain plug and handles for transportation.
Rotomolded construction for exceptional rigidity and durability, and premium-quality foam insulation for optimal ice retention.

**LinQ Locking Anchor Bases (295100858) is required for installation on 2018 models and on some 2019 models.**

If your watercraft is not equipped with a ladder, adding one for easy reboarding is recommended. Note: Rod Holder (295100795) can simply be added in the slotted bars of the cooler.

Compatibility
RXT, RXT-X, GTX, GTX Ltd, WAKE PRO (2018 and up), FISH PRO

Description 

Designed not just for cutting edge performance but killer style! Best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

Greater cornering ability and more straight line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race proven performance

Description 

Includes all bearing and plates that are not available to buy separately OEM

SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.