Description 

Larger openings for increased water flow into the engine for lower engine temps

Suits any late model 160mm jet unit

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing and can be used for recreational, too
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Black anodized
• Comes with billet cover plates for a sleek design look

This steering stem will fit 2008-2011 FX but the cover plate will need modification to fit these models

Description 

Includes all bearing and plates that are not available to buy separately OEM

SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed. 

Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas

Increases trim range to bring the nose of your ski higher and increase speed!

Note: Only Suits Yamaha Models WITH RiDE 

Click Here To Download WR06021 Instructions

Description 

Designed not just for cutting edge performance but killer style! Best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

Greater cornering ability and more straight line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race proven performance

 Description 

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps. 

Key Features: 

New Anodised core!!!!

• Huge internal core element for increased airflow and denser air
• Extremely lower air intake temps over OEM cooler
• Huge HP gains up to 45+ Horsepower in certain applications
• Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
• Upright element and water flow for increased heat transfer and efficiency
• Upright mounting allows water to completely drain from the unit after use
• Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
• Complete Independent Intercooler cooling kit upgrade for lower air temps
• Note* May required adjustment of reverse cable mounting for early model FX 08-11

WR01007 YAMAHA 1.8L INTERCOOLER KIT INSTRUCTIONS

• Vent Valve Cover Breather Filter
• Performance: improves up to 95% filtration efficiency.

Description 

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Description 

This complete kit includes (8) Washers, (8) Studs and (8) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

More accurate & consistent torque loading provides a more uniform clamping force on the head gasket

Kit includes 8 x stud/nut/washer. Picture for illustration purpose only

Description 

Full set of 12 CNC machined retainers manufactured from high strength and hardened aerospace certified titanium alloy. Designed to add strength while offering weight reduction, all of our titanium retainers are finished to precise tolerances.

A must for any Sea-Doo looking to rev over 8400 rpm

Perfect to use in combination with any 8400+ rpm tune

Suits ALL Sea-Doo 4-Tec 1503cc and ACE 1630cc Engines

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Description 

• Billet Drive coupler for Yamaha 1.8 Engine
• Fits any 1.8 Yamaha Engine
• Billet construction huge strength upgrade over stock cast unit
• Utilizes OEM rubber coupler
• A must for any High Horsepower/ Race watercraft

WORX Racing Components performance exhaust allows removal of restrictive STD exhaust baffle for increased performance and great exhaust note. Our Billet anodized rear exhaust outlet gives your ski a great performance look.

• Increased throttle response through the rpm range
• Lightweight molded silicone hose
• Billet anodize rear Exhaust outlet
• Easy install with all hardware provided in the kit
• Suits 2 seater style sparks only (DOES NOT FIT 3 SEATER MODELS)
• WORX WR04008 will suit 3 seater Spark models

Description 

WORX Racing NEW Sea-Doo 4-tec Intake manifold Girdle kit provides added strength to the Sea-Doo intake manifolds. The Bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the join in the manifold that splits under higher boost pressures on skis with aftermarket superchargers or running higher rpm’s.

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

WORX Racing Components performance exhaust allows removal of restrictive STD exhaust baffle for increased performance and great exhaust note. Kit easily installs using OEM exhaust exit location.

• Increased throttle response and reduced back pressure

• Lightweight molded silicone hose

• Easy install with all hardware provided in the kit

• Suits 2 and 3 seater style sparks models including IBR models

Description

• 2.5 INCH BILLET OUTLET
• MOULDED SILICONE HOSE eliminate resonance to deliver tough, throaty exhaust sound
• Standard outlet Block Off included in the kit
• Eliminates restrictive sound suppression baffles
• Suitable for Recreational and Race Skis
• Suits GTR, GTI, RXPX T3 Hull, Early 4-Tec models (*note may need opas removed before install)
• *Does NOT Fit S3 Model skis or new RXPX 300 Models  

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

• Our cost-effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
• Easy install to OEM location
• Lightweight billet construction less load on the hose to reduce fatigue and tearing
• Easy to disassemble for cleaning and maintenance
• Cost effective upgrade for stock or modified skis

Description 

• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow

Description

WORX SEADOO Free Flow exhaust elbow replaces the restrictive OEM sound suppression baffle in any SEADOO 4-tec watercraft. The black anodized Aluminium tube is easily installed to give your ski upgraded performance and great exhaust note.

Note: Some early model Sea-Doo's may require modification to install (2004 RXP) (Does not suit 02-03 GTX) please contact us if you are unsure.

Does NOT Suit 300hp models and all 2017+ models now require part No: WR04029

Description 

WORX Sea-Doo Free Flow exhaust elbow replaces the restrictive OEM sound suppression baffle in any New Sea-Doo 300hp and All 2017+ watercraft (excluding Spark). Black coated Aluminium tube is easily installed to give your ski upgraded performance and great exhaust note.

Allows for easier access and removal of OEM intercooler

Suits 2016+ RXTX, RXPX, GTX Ltd 300 Hp models

Suit all 2017+ N/A models GTI, GTR, GTX, GTI 900ace motor (Not spark)

Description 

• Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into you Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
• Billet anodized construction allowing 1,2 or 3 fittings to be installed
• Fits all 1.8 Yamaha engines (may require o-ring for early models)
• Allows for maximum cooling to the engine under high boost
• Race proved in a closed course and endurance

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• 8 feet of Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• Suits 185/215/255/260 models

Description 

Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.

Description 

-160 Deg (ºF) thermostat a direct drop-in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 deg (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull with no drilling
• SUITS 2016-2020 RXPX 300 T3 Hulls ONLY

Description 

2.5 INCH BILLET OUTLET
MOULDED SILICONE HOSE eliminate resonance to deliver tough, throaty exhaust sound
Standard outlet Block Off included in the kit
Eliminates restrictive sound suppression baffles
Suitable for Recreational and Race Skis
Suits RXPX 260 & 300 models / GTR 215 & 230 models

***IMPORTANT PLEASE LIST MODEL AND YEAR OF SKI IN NOTES WHEN ORDERING AS THERE ARE 2 SIZE BLOCK OFF. THIS WILL ENSURE YOU ARE SHIPPED THE CORRECT BLOCK OFF FOR YOUR MODEL / YEAR OF SKI

Description 

WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbocharger before entering the engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

FOR 17+ GP1800 / 11+ VXR,VXS

Includes backing rails and all necessary hardware.

Product benefits include:

- Greater stability

- Improved cornering

- Superior handling

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware 

NOTE: Grips NOT Included 

Description 

The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.

Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximizes acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all-around handling of this boat.

This will fit all models of GP, 2015 and up

Description 

Billet Anodized Construction

Replaces expensive OEM rubber part which can fail and lead to boost leaks on S/C models

Comes with all hardware, gasket, and O-Rings for installation

Suits all Yamaha 1.8 Waverunners

Description 

Yamaha Pump Plug Kit WR07010, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.

This kit goes perfectly with the Worx Scoop Grate WR246 (also for the Yamaha 17-19 GP1800/VXR VXS 15+.)

The Kit is easy to fit and provides an immediate improvement on stock.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Specifically designed for the unique handling characteristics of the Yamaha FX and FZ hulls.

Includes backing rails and all necessary hardware.

Product benefits include:

- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off
- Stops the ski from sinking in the back in tight turns like stock sponsons
- Allows for Greater corner entry speed
- Maximized top speed performance by creating less drag
- Superior straight line stability
- Easy installation to stock mounting points

IJSBA legal for all classes

Description 

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Description 

Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.

This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.)

The Kit is easy to fit and provides an immediate improvement on stock.

Description 

This intake grate fits a number of the Seadoo models from the single rider HX as well as several of the three seater boats through to the 97 GTI.
It will improve hook up and cornering ability allowing you to ride the boat hard into tight turns and keep your pump fully loaded.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

• Greater cornering ability and more straight-line stability
• Adjustable fin and backing rail to suit riding style
• Easy mount to OEM holes
• IJSBA Legal in all classes
• Race-proven performance

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must-have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximize overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

Description 

Transform your Seadoo Spark in all water conditions improving drive, control, and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Description 

Pump Seal Kit to suit Intake Grate WR244.

Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.

Description 

Easily the first choice of Modification for you ST3 Sea-Doo RXTX. During testing, we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight-line stability
• Reduced cavitation on taking off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTX 155 AND RTX 230 MODELS

Description 

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you are off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Does not fit GTX ST3 or RTX 230 MODELS WR562-I for GTX and 230 Models

Description 

WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.

Come with all brass fittings included

Requires OEM exhaust sounds suppression baffle to be removed to install. (WR04029 freeflow available)

Suits RXPX 300 T3 Hull and RXPX 260 T3 Hull models

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle entering the corner.

Adjustment of height means the ability to control how much roll you want your watercraft to have to enter a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold.

Comes with backing rails and all necessary hardware!

Description 

Easily the first choice of Modification for you T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing, we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR556-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 12-23 FX and 14-16 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximized top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!

• 2 DEG Billet anodized pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Description 

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Description 

Allows for easy installation of extra cooling lines.
1/2 inch.

Description 

• Tapered offset to match OEM reduction nozzle
• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘3 bolt’ 1.8 Yamaha pump models

Description 

Allows Removal of restrictive OEM airbox for maximum Air Flow to your engine

Increased acceleration and overall RPM's

Race proven design a must for any Modified/ Race watercraft

Full hardware and bracket supplied to mount electrics and remove the bulky air box

Engine Breather Filter also provided in the kit

Description 

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in the kit

Description 

This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation.

For the ultimate Freeride Combination, pair this grate with our WR314 Rideplate.

For 2008+ Superjet Owners this is a great option for those wanting a less aggressive grate than our WR228.

Description

Worx Racing cast aluminum pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow the use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits all Yamaha Superjets and most aftermarket hulls.

Description 

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

Description

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for a more aggressive hookup. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders worldwide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts as a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.

Description 

- Adjustable to suit your individual riding style and ability

- Constructed from Marine Grade Aluminium

- Suitable for ALL styles of riding!

- Also compatible with various aftermarket hulls

Description 

Benefits Include:

- Specifically designed for the 2008 Superjet hull

- Better drive and control

- Greater stability