Our Air Intake System is designed to fit your supercharged  Sea-Doo 230/ 260/ 300 and Yamaha SHO/ SVHO model Watercraft. Eliminating the restrictive OEM air intake system will give your water craft not only the added acceleration you desire but also a sleek look to your water craft with added SUPERCHARGER NOISES!

• Increased acceleration & power with sweet supercharger noises!
• Marine grade washable and reusable Air Filter
• No hassle 3in direct to 4in mounting coupler
• Compatible with JP Racing Inc Oil Catch Can
• Convenient 10-15 min install time

FITS:

Sea-Doo Models- Supercharged 230/ 260/ 300 models - 2023+

Yamaha SHO/ SVHO Models - 2023+

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit.  Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.

-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry

- 4-Ply silicone hose

-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.

-Get greater reliability by reducing wear to your clutch and engine components.

-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.

NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Description 

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in the kit

• Improve reliability and performance by replacing the soft and flimsy stock rubber intercooler hoses with the Fizzle heavy duty reinforced tubing kit for your Sea-Doo 300 watercraft. Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300.

• Replaces stock hoses that are prone to bursting under heavy boost pressure

• Increased throttle response

• 5-ply heavy duty silicone construction

• Internal metal reinforcement

• Easier to install than stock rubber hoses and aftermarket piping kits

• High-quality marine grade 316 Stainless Steel hose clamps included

• Compatible with stock Sea-Doo 300 Intercooler, Fizzle SuperCooler, or Riva Gen. 4 Intercooler

• Tested on a heavily modified closed course Sea-Doo 300 race jetski with 23 PSI supercharger

Our new Air Filter Kit for Seadoo Spark increases throttle response and overall power by opening up and allowing more air flow over the more restrictive OEM air box.

Includes: Anodised alloy tube, high-temp silicone coupler, US Coast Guard Approved marine grade Air Filter element, stainless steel hose clamps. 

 Suits ALL Spark models.

Install requires tools, we suggest taking a look at the install instructions before purchase to ensure you have what you will need. 

FITTING INSTRUCTIONS

Click here to download

Description 

• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow

Description 

WORX Racing NEW Sea-Doo 4-tec Intake manifold Girdle kit provides added strength to the Sea-Doo intake manifolds. The Bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the join in the manifold that splits under higher boost pressures on skis with aftermarket superchargers or running higher rpm’s.

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Our Worx Racing Seadoo RXTX 2018+ Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

FITS: 

2018+ RXTX

2018+ GTX LIMITED 300

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Our Worx Racing Seadoo RXPX and GTR Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

FITS:

2020+ GTR

2021+ RXPX

Description

• Kit contents: Fizzle™ SuperCooler and Fizzle™ Sea-Doo 300 Intercooler Tubing Upgrade Kit: Intercooler waterline fittings and zinc anode, complete set of heavy-duty 5-ply silicone tubing with internal metal reinforcement, high-quality marine grade 316 Stainless Steel hose clamps.

• Direct replacement for full OEM Sea-Doo 300 HP intercooler system

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Fits all Sea-Doo 300 watercraft RXP-X 300, RXT-X 300, GTX 300

Description 

WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.

Come with all brass fittings included

Requires OEM exhaust sounds suppression baffle to be removed to install. (WR04029 freeflow available)

Description 

Billet Anodized Construction

Replaces expensive OEM rubber part which can fail and lead to boost leaks on S/C models

Comes with all hardware, gasket, and O-Rings for installation

Suits all Yamaha 1.8 Waverunners

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• 8 feet of Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• Suits 185/215/255/260 models

 Description 

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps. 

Key Features: 

New Anodised core!!!!

• Huge internal core element for increased airflow and denser air
• Extremely lower air intake temps over OEM cooler
• Huge HP gains up to 45+ Horsepower in certain applications
• Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
• Upright element and water flow for increased heat transfer and efficiency
• Upright mounting allows water to completely drain from the unit after use
• Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
• Complete Independent Intercooler cooling kit upgrade for lower air temps
• Note* May required adjustment of reverse cable mounting for early model FX 08-11

WR01007 YAMAHA 1.8L INTERCOOLER KIT INSTRUCTIONS

Worx's new Seadoo Oil Catch-Can collects excess oil vapours that would otherwise pass through your engine's air intake. The oils condense in the Catch-Can for easy periodic emptying through our convenient, bottom-mounted brass drainage plug. This catch-can is extremely easy to install and can either be used in conjunction with our recommended performance Seadoo Air Filters or as a standalone solution with OEM parts. 

Extend the life of your ski and maintain performance with this affordable catch-can, a must for any PWC rider that wants to look after their ski!

✓ - Ensures Consistent Performance

✓ - Improves Engine Efficiency

✓ - Aluminium Billet Construction

✓ - Convenient Bottom Mounted Drainage Plug

✓ - Fast & Easy Installation

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull with no drilling
• SUITS 2016-2017 RXTX/GTX 300 T3 Hulls ONLY

Description

• Direct replacement for OEM Sea-Doo 300 HP intercoolers.

• Compatible with OEM Sea-Doo 300 HP rubber intercooler air hoses and Riva Gen. 4 intercooler piping kit

• Maximize throttle response and achieve lower Air Intake Temperatures (AIT)

• Eliminate intercooler heat fade

• Kit contents: Fizzle™ SuperCooler with waterline fittings and zinc anode

• Utilizes stock intercooler location, works with the stock exhaust system or aftermarket exhaust

• Designed for maximum horsepower capacity

• Integrated zinc anode for added protection against corrosion

Description 

Allows Removal of restrictive OEM airbox for maximum Air Flow to your engine

Increased acceleration and overall RPM's

Race proven design a must for any Modified/ Race watercraft

Full hardware and bracket supplied to mount electrics and remove the bulky air box

Engine Breather Filter also provided in the kit

Description 

WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbocharger before entering the engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleeds on the front of the unit and a replaceable sacrificial anode to extend intercooler life.

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull with no drilling
• SUITS 2016-2020 RXPX 300 T3 Hulls ONLY

• Vent Valve Cover Breather Filter
• Performance: improves up to 95% filtration efficiency.