Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

• Easy to remove cap with side grip and wrench hex plug
• Ergonomic two handle design places on handle lower for easier lifting and better control
• Made from high impact polyethylene
• Exceeds recommended D.O.T. Standards
• Adjustable screw-on vent
• Containers are accurately graduated in gallons and liters
• 10" x 10" x 22" ~ 5 plus gallon capacity

DESCRIPTION

• THE BUMPERBOLTS ARE ANODIZED ALUMUNUM 
• DECK BOLTS COME WITH CUSTOM MADE WASHER (ADOIZIED) AND REPLACE YOUR BOLTS WITH BLACK STAINLESS STEEL CAP BOLTS. 

• 8 Long bolts

• 7 Short with over sized washers

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

• Easy to remove cap with side grip and wrench hex plug
• Ergonomic two handle design places on handle lower for easier lifting and better control
• Made from high impact polyethylene
• Exceeds recommended D.O.T. Standards
• Adjustable screw-on vent
• Containers are accurately graduated in gallons and liters
• 10" x 10" x 22" ~ 5 plus gallon capacity

Our Worx Racing Seadoo RXTX 2018+ Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

FITS: 

2018+ RXTX

2018+ GTX LIMITED 300

Our Worx Racing Seadoo RXPX and GTR Air filter kit allows for maximum air flow to your engine via a huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Seadoo OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

FITS:

2020+ GTR

2021+ RXPX

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• 8 feet of Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• Suits 185/215/255/260 models

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

• Easy to remove cap with side grip and wrench hex plug
• Ergonomic two handle design places on handle lower for easier lifting and better control
• Made from high impact polyethylene
• Exceeds recommended D.O.T. Standards
• Adjustable screw-on vent
• Containers are accurately graduated in gallons and liters
• 10" x 10" x 22" ~ 5 plus gallon capacity

• Easy to remove cap with side grip and wrench hex plug
• Ergonomic two handle design places on handle lower for easier lifting and better control
• Made from high impact polyethylene
• Exceeds recommended D.O.T. Standards
• Adjustable screw-on vent
• Containers are accurately graduated in gallons and liters
• 10" x 10" x 22" ~ 5 plus gallon capacity

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull with no drilling
• SUITS 2016-2017 RXTX/GTX 300 T3 Hulls ONLY

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing the restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull with no drilling
• SUITS 2016-2020 RXPX 300 T3 Hulls ONLY