Riders who enjoy splashing around in deep mud know how hard it can be to get themselves out when stuck. If that happens, you’ll want a Can-Am Mud Strap to hold on to.

Use this sturdy grab handle to keep a good hold on your vehicle and redistribute your weight around whenever you need to get more traction in difficult conditions. The Can-Am Mud Strap is robust and designed to stay firmly in place so you can always rely on it to maneuver yourself out of a bind. Convenient sturdy grab-handle. Lets drivers redistribute their weight for improved traction in demanding conditions. Not compatible with XT Handelbar Protector Kit (703100352).

Features:

• Convenient sturdy grab-handle. Lets drivers redistribute their weight for improved traction in demanding conditions. Not compatible with XT Handelbar Protector Kit (703100352).

Fitment / Fits on:

• G2, G2L, G2S

Installation complexity: 2

Shipping weight: 0.6526 lb

View installation instructions

<p>This ATV Air Filter shields your ROTAX engine from airborne contaminants, providing optimal protection, engine performance and filter service life for the widest range of off-road conditions.</p>

Unleash the full potential of your ATV with our easy-install Can-Am Outlander G3 Premium Air Filter with prefilter. Engineered with a cellulose-based pleated filtering media, it boasts superior filtering efficiency, capable of blocking 85% of particles as fine as 3 microns. This ensures an exceptional 99.9% filtering efficiency in standard off-road conditions. A foam washable prefilter is included to block larger debris and extend the lifespan of your main filter. Our air filter is precisely designed in terms of pleat count, depth, spacing and concentricity, striking the perfect balance between performance, protection and service life. With Can-Am’s decades of engineering excellence and rigorous testing, our Genuine air filters are a testament to our commitment to both quality and your ATV’s longevity. Make sure to inspect and replace your air filter as per the recommended maintenance chart. shields your ROTAX engine from airborne contaminants, providing optimal protection, engine performance and service life in the widest range of off-road conditions. Filtering media: Pleated Cellulose Paper Filter end cap: Polyurethane foam Inner/outer support liner: galvanized corrosion-resistant G30 steel 99.9% dust filtering efficiency in typical off-road application (M.E.R.V rating: 10) Total length: 187 mm (7.4 in) Outside diameter (filtering area, without prefilter): 110 mm (4.3 in) Outside diameter (end cap area): 119 mm (4.7 in) Inner diameter: 53 mm (2.1 in) Pleat count: 100 Includes washable foam prefilter

Features:

• shields your ROTAX engine from airborne contaminants, providing optimal protection, engine performance and service life in the widest range of off-road conditions. Filtering media: Pleated Cellulose Paper Filter end cap: Polyurethane foam Inner/outer support liner: galvanized corrosion-resistant G30 steel 99.9% dust filtering efficiency in typical off-road application (M.E.R.V rating: 10) Total length: 187 mm (7.4 in) Outside diameter (filtering area, without prefilter): 110 mm (4.3 in) Outside diameter (end cap area): 119 mm (4.7 in) Inner diameter: 53 mm (2.1 in) Pleat count: 100 Includes washable foam prefilter

Shipping weight: 0.8995 lb

Unleash your ride's soundtrack with this sleek audio roof! Waterproof, easy install, and packed with powerful sound—it's your Maverick X3's new best friend.

Developped in collaboration with RockFord Fosgate, the Maverick X3 audio roof delivers the ultimate riding soundtrack. The integrated speaker were designed specifically for the unique sound dynamics of the Maverick X3. This plug and play system is the easiest audio system to install. Audio System Full roof with sleek built-in audio. Four 8″ speakers, one 400 RMS and 800 peak watt amplifier, and one Head Unit supplied by Rockford Fosgate Audio. Lighting & Control Multi-colored RGB LED accent lighting around each speaker. 2.7″ color display with Bluetooth and Pandora connectivity. Design & Durability Easy to install: one wire connects the roof to the vehicle’s electronics. Fully sealed and waterproof. Compatibility Flip Kit-compatible. Not compatible with the Adventure Roof Rack if the Flip Kit is installed. Not compatible with the Upper Soft Door Panels.

Features:

• Audio System Full roof with sleek built-in audio. Four 8″ speakers, one 400 RMS and 800 peak watt amplifier, and one Head Unit supplied by Rockford Fosgate Audio. Lighting &amp
• Control Multi-colored RGB LED accent lighting around each speaker. 2.7″ color display with Bluetooth and Pandora connectivity. Design &amp
• Durability Easy to install: one wire connects the roof to the vehicle’s electronics. Fully sealed and waterproof. Compatibility Flip Kit-compatible. Not compatible with the Adventure Roof Rack if the Flip Kit is installed. Not compatible with the&nbsp
• Upper Soft Door Panels.

Benefits:

• ["Lighting with Customizable Lights","Optimized sound dynamics","Waterproof"]

Fitment / Fits on:

• Maverick X3

Installation complexity: 3

Shipping weight: 74.96 lb

View installation instructions

Our SxS Front Intrusion Bar protects you by preventing objects from entering and offers better visibility. Plus, this side-by-side front bar will match your vehicle's style and elevate the experience.

Not only does our steel SxS Front Intrusion Bar match your ride's edgy look, it prevents large objects from entering the driver and passenger area in the cockpit. Plus, this side-by-side front intrusion bar never feels intrusive. Say goodbye to obstructed lines of sight and blind spots, and say hello to clear visibility. Are you pumped to get after it with a side-by-side front bar? Steel intrusion bar matches perfectly with vehicle's styling. Inside and outside anti-corrosion coating with durable powder coat finish. Provides additional protection by preventing large objects from entering the driver/passenger area. Tube design reduces obstructed lines of sight and blind spots for better visibility. Not compatible with windshields and Soft Door Panels.

Features:

• Steel intrusion bar matches perfectly with vehicle's styling. Inside and outside anti-corrosion coating with durable powder coat finish. Provides additional protection by preventing large objects from entering the driver/passenger area. Tube design reduces obstructed lines of sight and blind spots for better visibility. Not compatible with windshields and Soft Door Panels.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Fitment / Fits on:

• Maverick Trail, Maverick Sport, Maverick Sport MAX, Commander, Commander MAX

Shipping weight: 22.05 lb

View installation instructions

Stuck? Not in our vocabulary. Use our Rear Winch Kit to get out f sticky situations and back to the action. This kit features the Can-Am HD Winch 3500-S with ergonomic handling and robust all-steel gear for unmatched torque and durability. Experience the pulling power of 3,500 lbs and a user-friendly, weather-sealed remote control for convenience. Safeguarded by a sealed solenoid, this winch is bolstered for all-weather performance, so you can keep rolling in any conditions. Includes the Can-Am HD Winch 3500-S and Rear Mounting Kit. Ergonomic clutch handle. Rugged all-steel gears and bushings for more torque and longer life. Automatic 100% load-holding brake. Corded 10 ft (3 m) weather-sealed, wired remote control (sold separately). Pulling strength capability of 3,500 lbs (1,588 kg). 50 ft of 3/16” (15.2 m of 4.8 mm) synthetic rope. Heavy-duty hawse fairlead. Sealed solenoid for all-weather protection. Plug-and-play. EC and UKCA compliant.

Features:

• Includes the Can-Am HD Winch 3500-S and Rear Mounting Kit.&nbsp
• Ergonomic clutch handle. Rugged all-steel gears and bushings for more torque and longer life. Automatic 100% load-holding brake. Corded 10 ft (3 m) weather-sealed, wired remote control (sold separately). Pulling strength capability of 3,500 lbs (1,588 kg). 50 ft of 3/16” (15.2 m of 4.8 mm) synthetic rope. Heavy-duty hawse fairlead. Sealed solenoid for all-weather protection. Plug-and-play. EC and UKCA compliant.

Benefits:

• ["Reinforced Material","Weather-resistant"]

Installation complexity: 3

Shipping weight: 38.39 lb

View installation instructions

Gear up with heavy-duty protection! This steel-tube front bumper not only shields your ride but also boasts a sleek finish and light mounting points. Adventure awaits!

Introducing the Front Bumper Can-Am Defender, a must-have for every Can-Am enthusiast who values both style and protection. Crafted from heavy-duty 1.5" (3.8 cm) diameter steel-tube construction, this bumper offers unparalleled durability and enhanced protection for your off-road adventures. Its anti-corrosion coating and durable powder coat finish ensure it withstands the elements while looking fierce. Plus, with integrated mounting points for lights, you can illuminate your path with ease. This bumper is essential for installing the Xtreme Front Bumper Plates, Front Rack, and Front Corner Protectors, making it the ultimate upgrade for your Can-Am Defender. Heavy-duty 1.5" (3.8 cm) diameter steel-tube construction. Provides enhanced protection. Inside and outside anti-corrosion coating with durable powder coat finish. Integrated mounting points for lights. Required to install the Xtreme Front Bumper Plates, Front Rack and the Front Corner Protectors.

Features:

• Heavy-duty 1.5" (3.8 cm) diameter steel-tube construction. Provides enhanced protection. Inside and outside anti-corrosion coating with durable powder coat finish. Integrated mounting points for lights. Required to install the Xtreme Front Bumper Plates, Front Rack and the Front Corner Protectors.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Fitment / Fits on:

• Defender, Defender MAX (2020)

Shipping weight: 23.2 lb

View installation instructions

Rugged durability meets smart engineering with the Rear A-Arm Protectors. Built tough with 5 mm injected polypropylene, they shield your ATV's rear suspension from off-road hazards like rocks, branches and other obstacles. Plus, their low-profile fit helps maintain ground clearance for a smoother, more comfortable ride. All installation hardware is included for seamless setup. Made of 5 mm Injected polypropylene Engineered to deliver rugged protection for your exposed rear suspension. Designed to fit closely around the A-Arms while keeping ground clearance with a low-profile build. Includes all the necessary hardware for installation.

Features:

• Made of 5 mm Injected polypropylene Engineered to deliver rugged protection for your exposed rear suspension. Designed to fit closely around the A-Arms while keeping ground clearance with a low-profile build. Includes all the necessary hardware for installation.

Benefits:

• ["Full Protection","Reinforced Material","Vehicle Longevity Improved"]

Installation complexity: 2

Shipping weight: 2.921 lb

View installation instructions

Conquer your work day with bold Half Doors that add comfort and ease to your time on the land. Put them to the test — they won't disappoint!

Made of durable plastic and a rigid metal frame, these Half Doors for the Can-Am Defender are up for any task. They feature a rear hinge wide opening so you can move in and out of the cockpit easily and without any obstruction. Plus, they come with interior pockets and liners for additional comfort, especially needed on those long shifts outdoors. Simple add-ons that make a heck of a difference! Half doors made of plastic. Metal frame for a higher level of fit and finish and rigidity. Rear hinge wide opening for ease of ingress/egress in the cockpit. Interior pockets and liners for more comfort.

Features:

• Half doors made of plastic. Metal frame for a higher level of fit and finish and rigidity. Rear hinge wide opening for ease of ingress/egress in the cockpit. Interior pockets and liners for more comfort.

Benefits:

• Multi Compartments

Shipping weight: 22.02 lb

View installation instructions

Love to do it yourself? Try the Can-Am 4T 5W-40 Full Synthetic Oil Change Kit containing an oil filter, o-rings and a washer. It’s the best way to give your vehicle’s engine the care it deserves.

XPS oils are expertly engineered to perform in the harshest conditions and extend the life of your ride. No matter the size or type of BRP vehicle you have - XPS has you covered. For those that like to take matters into their own hands. The 4T 5W-40 Full Synthetic Oil Change Kit for Rotax 500 cc or more V-Twin engine provides you with everything you need to change the oil of your Can-Am Off-Road vehicle yourself. The all-in-one kit is easy to use and includes XPS Synthetic Oil, an oil filter, o-rings and a washer. Tested and designed to improve the performances of your vehicle, our XPS oils last longer than other oils. Ultra-convenient “all-in-one” oil change kit saves time and money. Includes XPS Full Synthetic Oil, oil filter, o-rings and washer. Synthetic (5W-40 999T) Designed for an ambient temperature of -31°F (-35°C) to 104°F (40°C), providing wide ranging protection.

Features:

• Ultra-convenient “all-in-one” oil change kit saves time and money. Includes XPS Full Synthetic Oil, oil filter, o-rings and washer. Synthetic (5W-40 999T) Designed for an ambient temperature of -31°F (-35°C) to 104°F (40°C), providing wide ranging protection.

Get down and dirty with a Snorkel Kit designed for deep mud riding. Raise the point of the air intake and keep your vehicle going even when going deep. Welcome to mud heaven!

Introducing the Can-Am Snorkel Kit, your ultimate companion for conquering the wildest terrains. This comprehensive snorkel kit is designed for extended air intakes and CVT exhaust, ensuring your ride stays powerful even in muddy conditions. The CVT outlet seamlessly integrates into the pod cover, enhancing both functionality and aesthetics. While it’s not compatible with windshields, it’s perfect for those who dare to push boundaries. Plus, it can be effortlessly installed with the Integrated Audio System (715005354). Elevate your adventure and let nothing hold you back! Comprehensive snorkel kit for extended air intakes and CVT exhaust. The CVT outlet integrates into the pod cover. Ideal when riding in muddy conditions. Not compatible with windshields. Can be installed with the Integrated Audio System (715005354).

Features:

• Comprehensive snorkel kit for extended air intakes and CVT exhaust. The CVT outlet integrates into the pod cover. Ideal when riding in muddy conditions. Not compatible with windshields. Can be installed with the Integrated Audio System (715005354).

Shipping weight: 10.79 lb

Let's be honest, mud makes every ride more fun. Can-Am Front Mudguards are crafted from durable EPDM rubber to stop even the thickest mud, sludge and debris in their tracks. Sold in pairs, these trail-ready shields offer full side coverage, so you can spend more time off-roading and less time cleaning. Now, who's ready to get dirty? Keep mud and debris out of the side of the vehicle. Made of EPDM rubber. Sold in pairs.

Features:

• Keep mud and debris out of the side of the vehicle. Made of EPDM rubber. Sold in pairs.

Benefits:

• ["Full Protection","Reinforced Material"]

Installation complexity: 2

Shipping weight: 3.715 lb

Feel ready to go out into the wild! These strong Fender Flares keep mud and debris away, so your vehicle stays clean and protected on any off-road adventure.

Experience the ultimate protection with these rugged Fender Flares, crafted from durable injection-molded polypropylene. Designed to shield your vehicle from mud and debris, they keep your ride looking sharp no matter the terrain. Featuring both front and rear extensions along with all necessary mounting hardware, they’re the perfect upgrade for track-ready vehicles seeking style and function combined. Robust injection-molded polypropylene construction. Perfect for keeping mud and debris outside the vehicle. Includes front and rear extension, and all mounting hardware. Ideal for track equipped vehicles.

Features:

• Robust injection-molded polypropylene construction. Perfect for keeping mud and debris outside the vehicle. Includes front and rear extension, and all mounting hardware. Ideal for track equipped vehicles.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Shipping weight: 15.43 lb

View installation instructions

Maximize your ride with this weather-resistant trunk box! Easy to install, lockable, and spacious—perfect for all your gear on the wildest adventures.

Expand the cargo capacity of any Can-Am vehicle with this LinQ trunk box. Designed to simply install in a quarter turn with the LinQ system, this cargo box offers a considerable amount of Cargo space, which is weather resistant to make sure gear and essentials stay dry and clean. LinQ mounted for easy-on, easy-off installation. Lockable and weather-resistant. 23 US Gal (87 L) capacity. DImensions: 55,2 cm L x 112,3 cm W x 40,3 cm H Holds cargo safely and securely while riding. Comfort pads for ATV passenger. G2L: LinQ Base (715002350) is required. Maverick Trail, Maverick Sport, Maverick Sport MAX: LinQ Cargo Rack (715003702) or LinQ Pivoting Rack (715004708) is required for installation.

Features:

• LinQ mounted for easy-on, easy-off installation. Lockable and weather-resistant. 23 US Gal (87 L) capacity. DImensions: 55,2 cm L x 112,3 cm W x 40,3 cm H Holds cargo safely and securely while riding. Comfort pads for ATV passenger. G2L: LinQ Base (715002350) is required. Maverick Trail, Maverick Sport, Maverick Sport MAX: LinQ Cargo Rack (715003702) or LinQ Pivoting Rack (715004708) is required for installation.

Benefits:

• ["Clip & Go LinQ System","Ultimate protection","Weather-resistant"]

Fitment / Fits on:

• G2 (except 6x6 models), G2L, G2S, Maverick, Maverick MAX, Maverick X3 (except X mr models), Maverick X3 MAX, Maverick Trail, Maverick Sport, Maverick Sport MAX

Installation complexity: 1

Shipping weight: 28.66 lb

View installation instructions

See every turn in Can-Am Side Mirrors for side-by-side vehicles. They're made of sturdy 6/6 black nylon with a die-cast aluminum bracket for a stylish look and higher durability.

Dominate every twist and turn with our robust Side Mirrors. Crafted from resilient 6/6 black nylon and anchored by die-cast aluminum brackets, these convex mirrors are a fusion of style and endurance. They’re fully adjustable to your line of sight and expand your field of vision to help you conquer every corner of the trail with safety and confidence. Spring-loaded pivots also allow these mirrors to fold up completely when you’re riding around a tight spot. Sold in pairs. Rugged black nylon 6/6 construction with coated cast-aluminum mount. Dual adjustment (horizontal and vertical) will suit any rider. Convex optics deliver optimal field of view (FOV). Spring-loaded pivots let mirrors fold back completely. Fit with and without doors and half doors. Sold in pairs. Not compatible with Soft Doors and Soft Cab Enclosures.

Features:

• Rugged black nylon 6/6 construction with coated cast-aluminum mount. Dual adjustment (horizontal and vertical) will suit any rider. Convex optics deliver optimal field of view (FOV). Spring-loaded pivots let mirrors fold back completely. Fit with and without doors and half doors. Sold in pairs. Not compatible with Soft Doors and Soft Cab Enclosures.

Benefits:

• ["Adjustable","Reinforced Material","Weather-resistant"]

Fitment / Fits on:

• Defender, Defender MAX

Installation complexity: 1

Shipping weight: 11.02 lb

View installation instructions

Defend your ride with heavy-duty steel corner protectors! Built tough for the Commander, these bad boys are your front-line defense against the wild.

Introducing the Front Corner Protectors for Can-Am Commander, the ultimate armor for your off-road adventure machine. Crafted from heavy-duty 1.5” (3.8 cm) diameter steel tubing, these protectors are engineered to withstand the toughest terrains. Their inside and outside anti-corrosion coating, coupled with a durable powder-coat finish, ensures longevity and resilience against the elements. Designed specifically for the front corners of your Commander, they require a stock XT, XT-P, or X mr bumper for installation. Sold in pairs, these protectors are your first line of defense, ready to keep your ride looking fierce and ready for action. Heavy Duty 1.5″ (3.8 cm) diameter steel tubing. Inside and outside anti-corrosion coating with durable powder-coat finish. Provide additional protection for vehicle’s front corners. Requires stock XT, XT-P or X mr bumper. Sold in pairs. Not EC compliant.

Features:

• Heavy Duty 1.5″ (3.8 cm) diameter steel tubing. Inside and outside anti-corrosion coating with durable powder-coat finish. Provide additional protection for vehicle’s front corners. Requires stock XT, XT-P or X mr bumper. Sold in pairs. Not EC compliant.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Fitment / Fits on:

• Commander, Commander MAX

Shipping weight: 8.569 lb

View installation instructions

Add more storage space with the side by side cargo bag, made by Ogio, with a 17.2 Gal (65 L) capacity.

Designed to offer the practicality of a storage bag, with the capacity of a cargo box, the Ogio premium bag offers the best of both worlds. This weather resistant bag features a Velcro surround the complete opening to make sure the elements are sealed out. The bring interior helps find any item stored inside, as well as practical separators organize the content and prevent items from shifting around while riding. Lock it in place, or remove it in second with the LinQ system, making packing and unpacking a lot easier. Tool-less installation and removal thanks to the LinQ system. 17.2 Gal (65 L) capacity semi-rigid cargo bag ideal for carrying anything you need on your vehicle. Buckle and elastic closure with a rubber seal that protects dust from entering the bag. 3-section lid for partial or full access to your bag. Inside separators for optimal bag organization. LinQ Base (715002350) is required for G2L. LinQ Luggage Rack (715001734) is required for G2S. LinQ Rack for Cargo Box (715003443) or LinQ Front Rack (715004312) is required for Defender. LinQ Cargo Rack (715003702) or LinQ Pivoting Rack (715004708) is required for Maverick Trail, Maverick Sport, Maverick Sport MAX.

Features:

• Tool-less installation and removal thanks to the LinQ system. 17.2 Gal (65 L) capacity semi-rigid cargo bag ideal for carrying anything you need on your vehicle. Buckle and elastic closure with a rubber seal that protects dust from entering the bag. 3-section lid for partial or full access to your bag. Inside separators for optimal bag organization. LinQ Base (715002350) is required for G2L. LinQ Luggage Rack (715001734) is required for G2S. LinQ Rack for Cargo Box (715003443) or LinQ Front Rack (715004312) is required for Defender. LinQ Cargo Rack (715003702) or LinQ Pivoting Rack (715004708) is required for Maverick Trail, Maverick Sport, Maverick Sport MAX.

Fitment / Fits on:

• G2 (except 6x6 models), G2L, G2S, Maverick, Maverick MAX, Maverick X3, Maverick X3 MAX, Maverick Trail, Maverick Sport, Maverick Sport MAX, Commander, Commander MAX

Installation complexity: 2

With a generous 1.8 Gal (7 L) capacity, the Center Underseat Storage Bin is accessible simply by lifting the center seat section – perfect for keeping essentials close and organized.

Optimize your vehicle’s storage with this high-quality Center Underseat Storage Bin, crafted from sturdy polypropylene to offer a generous 1.8 gallon (7 liter) capacity. The integrated handle makes removal and cleaning straightforward, saving you time and effort. Additionally, this storage bin is engineered to support a second battery installation when paired with the Auxiliary Battery Installation Kit, enhancing your vehicle’s power capabilities. The built-in drain plug simplifies the process of emptying liquids, while the bin’s location beneath the center seat allows for easy access without compromising cabin space. Ideal for farmers and adventurers alike, this versatile underseat storage solution combines functionality with convenience. Polypropylene-injected 1.8 US Gal (7 L) capacity storage bin. Watertight design keeps ice and drinks cold. Easy to remove and wash thanks to its integrated handle. Designed to receive a second battery when used with the Auxiliary Battery Installation Kit (715009473). Integrated drain plug allows easy draining.. Accessible by lifting center seat section.

Features:

• Polypropylene-injected 1.8 US Gal (7 L) capacity storage bin. Watertight design keeps ice and drinks cold. Easy to remove and wash thanks to its integrated handle. Designed to receive a second battery when used with the Auxiliary Battery Installation Kit (715009473). Integrated drain plug allows easy draining.. Accessible by lifting center seat section.

Benefits:

• ["Easy to clean","Insulated Materials","Reinforced Material"]

Shipping weight: 2.877 lb

View installation instructions

Shipping weight: 0.0441 lb

Got some gnarly terrain to conquer? Protect your side-by-side with those Rock Sliders. You’ll be looking good as you tame the wild. Can-Am protection accessories add a sleek and stylish touch to your ride!

Love to go all out on rocky terrain? These side-by-side rock sliders are your go-to Can-Am protection accessory. Made of premium heavy-duty steel tubing, SSV Rock Sliders are extra stiff, protecting the sides and undercarriage against large obstacles and the damage they can cause. Their durable powder coat finish also gives an extra protection. Adventure is calling! Protect the vehicle’s sides against obstacles. Added grip on top to improve accessibility to the roof cargo. Made of unique heavy-duty steel profiled tubing. Inside and outside anti-corrosion coating with durable powder coat finish. Combine with the Front and Rear Bumpers for ultimate protection.

Features:

• Protect the vehicle’s sides against obstacles. Added grip on top to improve accessibility to the roof cargo. Made of unique heavy-duty steel profiled tubing. Inside and outside anti-corrosion coating with durable powder coat finish. Combine with the Front and Rear Bumpers for ultimate protection.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Fitment / Fits on:

• MAX Only

Shipping weight: 48.5 lb

View installation instructions

Elevate your ride with this relocator kit! Keep cool in the mud and enjoy hassle-free maintenance. Perfect for off-road warriors who demand peak performance.

Introducing the Radiator Relocator Kit for the Can-Am Outlander, a game-changer in off-road performance. This robust kit relocates your radiator to a top mount position, ensuring optimal cooling even in the muddiest conditions. Say goodbye to the worries of overheating while you conquer the trails. With easy access for radiator cleaning and engineered for straightforward cooling system maintenance, this kit is designed for the spirited rider who demands reliability. Complete with support, hardware, and hoses, it utilizes your existing radiator. Elevate your ride with the bold innovation of Can-Am. Relocates radiator to top mount position. Prevents cooling performance loss in muddy conditions. Allows riders to open the relocator hood for easy radiator cleaning. Engineered for easy cooling system bleeding and maintenance. Includes support, hardware and hoses. Uses existing radiator: radiator not included.

Features:

• Relocates radiator to top mount position. Prevents cooling performance loss in muddy conditions. Allows riders to open the relocator hood for easy radiator cleaning. Engineered for easy cooling system bleeding and maintenance. Includes support, hardware and hoses. Uses existing radiator: radiator not included.

Shipping weight: 31.97 lb

Allows you to install 4-point harnesses on the front passenger and driver seats of a Maverick Sport MAX. 4-Point harnesses need to be installed for both driver and front passenger seats when the 4-Point Harness Bar is installed.

Features:

• Allows you to install 4-point harnesses on the front passenger and driver seats of a Maverick Sport MAX. 4-Point harnesses need to be installed for both driver and front passenger seats when the 4-Point Harness Bar is installed.

Fitment / Fits on:

• Maverick Sport MAX, Commander MAX

Shipping weight: 10.58 lb

View installation instructions

• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘4 bolt’ 1.8 Yamaha pump models

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha SVHO

Rear Exhaust Kit – Yamaha GP1800, FX, FZ (2008–2018) & VXR/VXS (2015+)

Take your ski to the next level with our high-performance rear exhaust kit, designed to eliminate restriction, boost power, and give your ride that aggressive, race-ready look. Featuring a massive 3-inch black billet anodised outlet, this kit gives your ski a tough note ???? and means business—on and off the water.

? Moulded black silicone hose – for a smooth, easy installation

? 3-inch billet anodised exhaust outlet – bold, blacked-out, and built to perform

? Billet anodised block-off plate – clean and durable finish

? Deletes restrictive sound suppression baffles – freeing up power and improving flow

? Silicone hose design – helps reduce drone and exhaust resonance

? Essential for high-horsepower and race applications

Full disclaimer: All aftermarket exhausts—ours included—will make your ski noticeably louder.
If you want to turn heads and sound as tough as you ride, this is the upgrade for you. If not... the stock setup might be more your style ??

Instructions

Download Instructions

Fitment

• 2015-2019 Yamaha

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in kit

Instructions

Fitment

• 2008-2021, 2023-2025 Yamaha

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Fitment

• 2008-2020 Yamaha

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion.

Original Yamaha wear ring is constructed of cast aluminium with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller.

Fitment

• Yamaha
• Yamaha SVHO

WR001 Solas Impeller Tool – 18mm Spline, 18 Tooth

When it comes to installing or removing a Solas impeller, the right tool makes all the difference. The WR001 Solas Impeller Tool is specifically designed to fit Solas’ 18mm spline (18-tooth) hubs, giving you a secure grip so you can work cleanly, safely, and without damaging your impeller or pump.

This tool is essential for working with the following Solas impellers in the Worx range:

• SK-CD-12/14

• SK-CD-12/17

• YH-CD-18/22

• YJ-CD-12/17

• YJ-CD-12/20

• KR-CD-14/21

• KR-CD-15/22

Why you need it:

• Ensures proper fit and torque during installation

• Prevents costly damage to impeller and driveshaft

• Professional finish every time

Fitment

• Sea-Doo

Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Looking for a quick and easy solution to the lack of Trim on your Yamaha Jetski? Look no further than the Yamaha Trim extension! This extension has been specifically designed to increase your trim range and bring the nose of your ski higher, resulting in reduced surface drag and an added increase to stop speed.

As a cost-effective upgrade, you can expect to see an impressive 1-2 MPH increase in good riding conditions. And the best part? It fits 2022+ Yamahas, so you can enjoy all the benefits of increased trim range without any hassle. Don't be held back by stock limitations, upgrade to the Yamaha Trim extension today!

Instructions

Fitment

• Yamaha

• Fits Yamaha SuperJet 2021+ models
• 2° pump wedge Increases Bow Lift, reduces drag for higher speed
• Improves Handling - better turning response and stability
• Ideal for all styles of riding - surf, freeride, and high-speed flatwater
• Includes stainless steel mounting bolts for easy installation
• Made from durable, marine-grade materials

Fitment

• Yamaha
• Yamaha SuperJet

Get ready to upgrade your watercraft with the Sea-Doo Handlegrips Kit! These daring handlegrips are designed to elevate your steering control, providing a fresh and playful touch to your riding experience. Crafted by Sea-Doo, a brand known for innovation and quality in the powersports industry, these handlegrips are a must-have accessory. Unleash your adventurous spirit on the water with the Sea-Doo Handlegrips Kit and enjoy a whole new level of control and style. Sold in pairs Earther Grey/Black Better control and comfort using dual density rubber design.

For a musical getaway on the water, check out the 80W Platinum Audio System by Sea-Doo. It includes two 80-watt speakers with Bluetooth technology that are specially designed for your watercraft. Its unique and stylish design enhances the appearance of the speakers and blends them in perfectly with your watercraft. Thanks to the 80-watt dual output amplifier and Advanced Digital Signal Processing, you can listen to your favorite tunes with exceptional sound quality, even while riding. The controls on the left speaker allow you to easily change songs and adjust the volume. It is also fully submersible. Whether you're on the water or moored at the dock, you can enjoy music that continues to play even when the engine is turned off. This Sea-Doo Platinum Audio System will take your adventures on the water to the next level! The Platinum Audio System Kit is BRP's most powerful audio system for personal watercraft. Two 80-watt speakers for music clarity, even while riding. Unique and stylish design makes the speakers stand out. An amplifier with two 80-watt channel delivers a loud music experience. Advanced Digital Signal Processing (DSP) optimizes sound quality. Fully integrated Audio System with Bluetooth connectivity. Remote control pad on left speaker for quick and easy song and volume changes. Fully submersible. Music will play even after engine is turned off. Needs harness (278003684) if installed with more than two electrical accessories.

Take your watercraft to the next level of storage convenience with the Sea-Doo LinQ Multi Cargo Rack. This innovative option is designed to significantly increase your watercraft's storage capacity, allowing you to bring more gear and equipment on your adventures. With this PWC cargo holder, you can add up to three times more LinQ accessory emplacement to your watercraft. This means you can attach multiple LinQ accessories such as coolers, fuel caddies, or cargo bags, enabling you to customize your storage configuration to suit your needs. No more worrying about leaving essential items behind! Adds up to three times the available LinQ accessory emplacement to your watercraft. Enables multiple LinQ accessory configurations. Provides a larger lounging area or casting platform and easier reboarding. Uses equipped LinQ attachment system for quick, easy installation. Two LinQ Base Installation kits included. Additional base installation kits sold separately (295101034). Must be installed by authorized BRP dealers. Standard on Explorer Pro model. Not compatible with LinQ 13.5 US gal (51 L) Cooler (Double Latch).

Easily mount the LinQ Rod Holder or Cup Holder without obstructing your view - perfect for a thirst-quenching ride or smooth trolling. Designed for versatility and user-friendliness, this left side installation ensures your gear is always within easy reach. Elevate your Sea-Doo experience with this must-have accessory! Enables the installation of front-mounted LinQ Rod Holder (295100795) or LinQ Cup Holder (295100935) (sold seperately). Allows for easy access to beverages or rod during trolling without impeding the driver. Left side installation.

One is fun, but we think it's better with two! Get your friends in on the fun with this personal watercraft passenger seat for the RXP-X model. This easy-to-install accessory doesn't need tools ?Çö?áit just snaps on in place and replaces the driver's rear saddle. For passengers, they'll feel secure in place as it's designed with multiple grab options on the side and middle. Only way to have a passenger on a stock RXP-X. Two grab options for passengers, side and middle. No tools required for installation ?Çô simply remove driver cushion, unclip base, clip on passenger seat.

Speed is a must when it comes to towing waterskiiers and wakeboarders. The Ski And X Package Module delivers on that, and then some. Choose from different preset acceleration curves to achieve a perfect launch and steady tow speed everytime. Its user-friendly interface on gauge makes it easy to use. This boasts a simple plug-in connection. Standard on Switch Sport models. Includes hardware necessary for installation. One module that includes both Ski and X Package functions. Activates ski mode: Offers a choice of different preset acceleration curves for perfect launch every time when towing a skier or wakeboarder, plus steady tow speed. Activates X package functions on gauge. See X package module description to find out what are the X features that it unlocks on your vehicle. User-friendly interface on gauge. Simple plug-in connection. Standard on Switch Sport models. Standard on Switch Sport models. Includes hardware necessary for installation.

Keep your Sea-Doo Spark running at peak performance with our high-quality catch can. This essential upgrade helps reduce engine wear, minimise oil vapour build-up, and protect your intake system for smoother, more efficient rides.

Key features:

• Precision fit: Engineered to suit all Sea-Doo Spark models with seamless installation

• Engine protection: Reduces oil vapour from re-entering the intake, keeping your combustion clean

• Improved reliability: Helps prevent oil pooling in the intake manifold and reduces long-term engine residue

• Durable design: Built with high-grade, corrosion-resistant materials to withstand harsh marine conditions

• Easy maintenance: Includes quick-drain feature for simple servicing between rides

Whether you're upgrading for performance or prevention, this catch can is a must-have for any Sea-Doo Spark owner who values engine longevity and reliability.

The SHOEI Hornet X2 helmet is the ultimate adventure touring helmet designed to meet the needs of riders who embrace both on-road and off-road adventures. It sets a new standard for versatility, safety, and comfort, making it the go-to choice for those who refuse to be limited by terrain.Key Features:
Advanced Integrated Matrix (AIM+) Shell: The Hornet X2 features SHOEI's proprietary AIM+ technology, utilizing a combination of fiberglass and organic fibers to create a lightweight yet incredibly strong shell that provides superior impact resistance.
Dual-Layer Multi-Density EPS Liner: The helmet's EPS liner is designed for enhanced impact absorption and includes ventilation channels to maintain airflow.
Dual Sport Design: The Hornet X2 is specifically designed for dual sport riders, offering the convenience of a face shield and visor to cater to both on-road and off-road needs.
Outstanding Ventilation: Equipped with multiple intake and exhaust vents, the helmet's ventilation system ensures optimal airflow, even during strenuous off-road riding.
Wide Field of Vision: The helmet provides a large, unobstructed field of vision, accommodating goggles for off-road adventures and a clear, distortion-free face shield for on-road comfort.
3D Max-Dry Interior System: The interior liner is constructed from SHOEI's Max-Dry material, known for its moisture-wicking properties. It's fully removable, washable, and replaceable for a fresh and comfortable fit.
Emergency Quick Release System (EQRS): EQRS allows for swift and safe helmet removal in emergencies, reducing the risk of further injury.
Adjustable Visor: The visor is easily adjustable to cater to different riding conditions, providing shade from the sun and protection from debris.
Aerodynamic Stability: The helmet's design reduces wind noise and drag, contributing to a stable and comfortable riding experience.
Chin Curtain and Breath Guard: These features help manage airflow inside the helmet, reducing noise and preventing sh

Step into the future of touring with the SHOEI GT-Air 3, a helmet that combines cutting-edge safety, comfort, and aerodynamics for the modern rider. Designed with a sleek, aerodynamic silhouette, it reduces noise while delivering exceptional performance on the open road. Safety comes first with its shock-absorbent AIM shell, multi-density EPS liner, and the Emergency Quick Release System (E.Q.R.S.), ensuring you're protected in any situation. The mist-retardant CNS-1C Pinlock(R) visor and stainless-steel Micro Ratchet System provide clear vision and security.

Comfort is paramount, featuring a QSV-2 sun visor and 3D center pad, with cheek pads in various thicknesses for a personalized fit. The detachable, washable pads keep you fresh on long rides, while the integrated Shoei Comlink system keeps you connected. Ventilation is engineered to perfection, with multiple inlets and outlets, an insect filter, and adjustable vents for ultimate airflow. Aerodynamically enhanced with an integrated spoiler and wind tunnel testing, the GT-Air 3 delivers a smooth, quiet ride, making it the go-to helmet for touring enthusiasts seeking both style and substance.

Wherever the road takes you, the Neotec 3 Anthem turns heads with its striking design and precision craftsmanship. It sets a new standard with its innovative flip-up feature, sleek profile, and unmatched comfort. This dual-purpose helmet combines superior aerodynamics, an enhanced sun visor, and seamless integration with the SHOEI Comlink system, making the Neotec 3 Anthem the perfect companion for any motorcycle adventure.

The SHOEI X Fifteen Marquez Holi Helmet is built for speed and made to stand out. Its aerodynamic shell is shaped for high-speed stability, and the CWR F2R race shield with double lock keeps your view locked in. Inside, a multi-density EPS liner and cheekpad cooling system manage airflow and reduce heat. The helmet comes with a Pinlock anti-fog lens and a chin bar that's hydration-system ready for longer rides.The Max Dry liner pulls sweat away and is easy to wash, and the adjustable center pad system helps you fine-tune comfort. You also get EQRS cheekpads, a breath guard, and a chin curtain right out of the box. For riders who want top performance and serious personality, this helmet delivers.

Experience the pinnacle of motorcycle racing helmets with the SHOEI X-Fifteen Daijiro. Designed for aerodynamic superiority, this full-face helmet combines the Advanced Integrated Matrix Plus Multi Fiber construction with a multi-density EPS liner, ensuring both safety and comfort. Its innovative air-cooling system and cheek pad ventilation promote optimal airflow, while the CWR-F2R racing shield and Pinlock(R) lens offer clear visibility under all conditions.

The SHOEI RF-1400 Ideograph helmet is a true game-changer for motorcycle enthusiasts. Its cutting-edge design, lightweight construction, and aerodynamic features make it stand out in the world of motorcycle helmets. Designed with your comfort and safety in mind, this helmet offers an exceptional riding experience.Constructed with a Multi-Ply Matrix AIM+ shell, the RF-1400 Ideograph strikes the perfect balance between strength and weight reduction, providing top-notch protection without sacrificing comfort. The helmet's advanced ventilation system ensures optimal airflow, keeping you cool and refreshed during long rides. Plus, its wide field of vision guarantees unobstructed sightlines, enhancing your overall riding experience.In addition to its outstanding performance, the RF-1400 Ideograph boasts a bold graphic style that adds a unique flair to your riding gear. Elevate your motorcycle journey with this exceptional helmet, combining style, comfort, and safety like never before.

Fits Sea-Doo towable tubesTo replace a Boston valve on Sea-Doo towable tubes

Providing protection from freezing or overheating, our Extended-Life Pre-Mixed Coolant is easy to use as it contains the correct dilution and necessary additives for your engine. Also designed to prevent corrosion and to inhibit cavitation in cooling systems, the long-life 5-year (orange) formula offers superior heat transfer and is specifically formulated for vehicles. Spend less time working on your vehicle and more time enjoying it!This XPS Extended-Life Pre-Mixed Coolant is the ideal replacement for vehicles that normally use a 2-year antifreeze/coolant (green).Antifreeze/Coolant contains the correct dilution and the necessary additives to prevent corrosion and inhibit cavitation in BRP cooling systems.Long-life, 5-year formula specially formulated for BRP vehicles.Superior heat transfer.Ideal replacement for vehicles that normally use a 2-year antifreeze/coolant (green).5 years (orange).SpecificationsLiquid typeCoolant

Marine UV Protectant has powerful UV blockers to protectyour boating investment. This formula leaves a clean, non-greasy, satin finish that restores color and luster whilepreventing fading and cracking. Perfect for both synthetic andnatural rubber, all types of vinyl, plus it also works onfiberglass, gelcoat and most plastic. The anti-static propertiesrepel dust and grime, keeping your boat looking like newmuch longer.HOW TO USESpray on surfaces and spread evenly with a dry and cleancloth. Allow five minutes for product to penetrate and wipeany excess with an additional cloth. Allow one to two hoursfor drying process to be complete.RECOMMENDATIONSMake sure surfaces are clean before applying product. Alwaystest for compatibility or discoloration on hidden area beforeapplying to the entire surface. Do not use on natural leatheror suede. Not recommended for watercraft seats.HOT TIPSFor maximum efficiency, do not apply with a highly absorbent cloth.Powerful UV protectionRestores color and lusterPrevents fading and crackingNon-greasy satin finishRepels dust and grime

If you enjoy working on your vehicle and like to get your hands dirty, this is exactly what you need. The 4T 5W-40 Synthetic Blend Oil Change Kit for Rotax 900 ACE engine provides you with everything you need to change the oil of your watercraft yourself. Easy to use, the all-in-one kit includes XPS Synthetic Blend Oil, an oil filter, o-rings and a washer. Tested and designed to improve the performances of your vehicle, our XPS oils last longer and protect your engine better than other oils.Ultra-convenient “all-in-one” oil change kit saves time and money.Includes XPS Synthetic or Synthetic Blend Oil, oil filter, o-rings and washer.SpecificationsEngine TypeEngine 4-StrokeOil gradeGrade 5W-40

This essential accessory prevents your coupler from hitting the ground when your trailer is not hitched to a vehicle. No more worries about damage! Easy to install with included hardware and standard on some models, this Coupler Stand is a must-have for every Sea-Doo enthusiast's gear collection. Keep your equipment safe and in top condition with this practical and reliable Sea-Doo product.Prevents coupler from hitting the ground when trailer is not hitched to a vehicle.Includes hardware necessary for installation.Standard on some models.SpecificationsCalifornia Prop 65Warning

This cooler boasts premium-quality foam insulation for extended ice retention. Designed to mount on any 16 inch LinQ mounting base, it can be installed in a variety of locations. The quarter turn LinQ system makes it easy to install, remove or relocate in seconds. Bring it along for lunch or lock it securely in place for the ride the premium foam insulation will keep it's content cold up to 5 days. Whether you're exploring the trails, the waves or cruising on the road, the LinQ Cooler is the ultimate companion for your journey.All the benefits of LinQ—simple, fast and secure.Rotomolded construction for exceptional rigidity and durability.Premium-quality foam insulation for optimal ice retention.Uses LinQ mounting system (Patent US 8777531 and US 8875830).Easy one-second on/off toolless system.Can contain twenty 355 ml cans.Keeps ice cold for three days.Exterior dimensions: 13" L x 20" W x 10" H.Interior dimensions : 9" L x 17" W x 7" H.Outlander: Can't be installed on the rear lid due to weight limitation.SpecificationsCo-BrandLinQCalifornia Prop 65WarningInstallation Instructions219400964 Installation Instructions

• First choice for adding performance and handling at minimal cost
• Model specific designs
• Increases water intake through pump
• Improved cornering without loss of speed
• Adds stability and straight line tracking in choppy water

Brand new, genuine Can-Am Ecu Module Blanck. This is a factory original equipment item, not aftermarket. 

This blow off valve block-off kit includes an aluminum block-off plate, o-ring, and v-band clamp. It’s used to cover and seal off the 50mm blow off valve flange in the event that you decide to not use a blow off valve on your setup. This block-off kit is compatible with the 50mm flange that is included with certain Fizzle products, such as the Fizzle Yamaha Intercooler Kits and select Fizzle blow off valve kits for Sea-Doo and Yamaha.

Let your engine breathe better! This kit allows you to easily remove the restrictive filter element from inside the intake manifold. Removing the restriction increases horsepower and allows for gains of ~1 PSI of boost pressure. Included is a cutting guide for the required 3-1/8” (79mm) hole saw that’s needed to remove the filter element (hole saw sold separately). The void left by the filter element is filled with the provided precision machined billet aluminum block-off plug with o-ring seals and also includes a 2-piece billet aluminum clamp to secure the block-off plug in place. The block-off plug also features a 1/8” NPT threaded port that allows you to connect a vacuum line to work with a wide array of accessories such as blow off valves, boost gauges, or rising rate fuel pressure regulators. All the aluminum components are anodized for increased corrosion protection.

Fits all Sea-Doo 325, 300, and 230 HP watercraft

Increase speed and achieve a drier ride by raising the bow of your watercraft with this 2 degree pump wedge. The extra angle creates more lift in the hull and less drag, which typically increases top speed by around 1-2 MPH. This pump wedge is machined from billet aluminum and is anodized to help protect against corrosion. It has easy installation as the wedge fits directly between where the venturi nozzle bolts to the jet pump housing.

Fits all Yamaha 1.8L and 1.9L Yamaha watercraft 2008 to present

Increase your wet storage capacity with our large 50 liter RecDeck Stern Mounted Storage. Mounts with no drilling required and features durable, weather resistant compression-molded black EVA foam and (2) side rod holders. The bag allows access to the stern tow point for watersports usage without needing to be removed. Compatible with existing VX Cooler Bag.

Must have the VX Rec Deck

FITS:

FX CRUISER HO 2019-2022
FX CRUISER SVHO 2019-2022
FX CRUSIER HO AUDIO 2022
FX CRUSIER SVHO AUDIO 2022
FX HO 2019-2022
FX HO AUDIO 2022
FX LIMITED SVHO 2019-2022
FX SVHO 2019-2022
FX SVHO AUDIO 2022

Description:

Adds extra comfort for passengers with a stylish, modern look. Fast and easy to install, remove and customize configuration in seconds with exclusive Switch quick-attach tile system integration. 10mm thickness adds ideal padding for lounging, sunbathing and cruising for the whole family. Polyurethane material construction cleans easily and resists stains, fading and mildew. Anti-slip finish provides secure surface to stand on, even in wet conditions.

Fits On: Switch Sport 18

Description:

Adds extra comfort for passengers with a stylish, modern look. Fast and easy to install, remove and customize configuration in seconds with exclusive Switch quick-attach tile system integration. 10mm thickness adds ideal padding for lounging, sunbathing and cruising for the whole family. Polyurethane material construction cleans easily and resists stains, fading and mildew. Anti-slip finish provides secure surface to stand on, even in wet conditions.

Fits On:  Switch 16

Each paper based service manual includes a Table of Contents and index which include an exploded view of parts disassembly sequence, bolt torques, thread sizes, and page references to descriptions in text. Service and repair instruction includes disassembly/reassembly, inspection, testing/troubleshooting, repair and adjustments with information on Special Tools, Specifications, Fault Codes, Maintenance Schedule, Engine, Engine Cooling, Fuel/Emissions, Steering, and Hull Components.

Applications:

2009 YAMAHA VX SPORT
2009 YAMAHA VX DELUXE
2009 YAMAHA VX CRUISER
2008 YAMAHA VX SPORT
2008 YAMAHA VX DELUXE
2008 YAMAHA VX CRUISER
2007 YAMAHA VX SPORT
2007 YAMAHA VX DELUXE
2007 YAMAHA VX CRUISER

Each paper based service manual includes a Table of Contents and index which include an exploded view of parts disassembly sequence, bolt torques, thread sizes, and page references to descriptions in text. Service and repair instruction includes disassembly/reassembly, inspection, testing/troubleshooting, repair and adjustments with information on Special Tools, Specifications, Fault Codes, Maintenance Schedule, Engine, Engine Cooling, Fuel/Emissions, Steering, and Hull Components.

Applications:

2013 YAMAHA FZS
2013 YAMAHA FZR
2012 YAMAHA FZS
2012 YAMAHA FZR
2011 YAMAHA FZS
2011 YAMAHA FZR
2010 YAMAHA FZS
2010 YAMAHA FZR
2009 YAMAHA FZS
2009 YAMAHA FZR