Allows maximum airflow to your engine removing restrictive OEM paper filter
Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
Billet anodized 4-inch adaptor mounts easily to the hull
Silicone molded hose the tapers down to suit the supercharger with a smooth internal bore to eliminate any intake turbulence
Increased acceleration and overall RPM’s
Works great combined with (WR04001) Ribbon Removal for maximum airflow into your engine
Race-proven design a must for and Modified/ Race watercraft
Engine Breather filter also provided in the kit
Solas Impeller Shaft Holder WR014H
Impeller Shaft Holder
Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.
WORX Yamaha Engine Cooling Kit
Suits all SVHO Yamaha models including 2018+ models with updated pump strainer
WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed ‘extra cooling’ when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance. Hi-flow intake screen allows for an increase in water flow levels to all engine and associated components.
Kit includes all necessary fittings, hoses, gaskets and clamps, bolts you need.
1/2 inch hose and fittings. Suitable for Stock and mild and heavily modified applications (eg. filter, reflash, upgrade supercharger, etc.)
A must for skis with re-programmed ECU and higher RPM limit, or operating in hotter climates.
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Includes authentic TiAL or HKS (your choice) blow off valve
Gain 2-3+ MPH top speed over OEM Yamaha SHO or SVHO intercooler
Gain 200-300+ peak RPMs, acceleration and throttle response
Kit Contents: The intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008-2019, including FZR, FZS, GP1800, FX SHO, and FX SVHO models and supercharged Yamaha Jet Boats
WORX Yamaha Trim Extension All RiDE models only NEW
Fits 2015+ Yamaha VXR and 2015+ Yamaha FX SVHO
Increases trim range to bring the nose of your boat higher and increase speed!
Note: Only Suits Yamaha Models WITH RiDE System
WORX Yamaha Blow Off Valve Assembly 1.8L SHO/SVHO
Our cost-effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
Easy install to OEM location
Lightweight billet construction less load on the hose to reduce fatigue and tearing
Easy to disassemble for cleaning and maintenance
Cost effective upgrade for stock or modified skis
Yamaha Flush Kit
The Replacement Flush Hose features a swivel hose fitting. These flush hoses fit all late-model WaveRunners and Yamaha Boats that were equipped with factory flush kits. Available in red or blue.
WORX RACING WR554-I INSERT EDITION SPONSONS
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
Specifically designed for the unique handling characteristics of the Yamaha FX and FZ hulls.
Includes backing rails and all necessary hardware.
Product benefits include:
- Enhanced control, stability, and predictability, the ski stays hooked and does not throw you off - Stops the ski from sinking in the back in tight turns like stock sponsons - Allows for Greater corner entry speed - Maximized top speed performance by creating less drag - Superior straight line stability - Easy installation to stock mounting points
IJSBA legal for all classes
Solas Yamaha 160MM Concord 13/20 Impeller
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 13/20 variable pitch impeller works great with stock through Stage 2 modifications.
NGK LFR7A Spark Plugs
NEW OEM Spark plugs for Yamaha 1.8L SVHO supercharged motors
WORX Exhaust Kit SVHO GP1800/ FX 12+/ VXR,VXS 15+
Our Yamaha 2015+ VXR/VXS, FX SVHO rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.
Molded Black silicone hose for easy install Billet anodized black 3-inch exhaust outlet Billet anodized block off plate Eliminates restrictive sound suppression baffles Silicone hose reduces exhaust resonance and droning A must for High horsepower/ Racecraft
WORX Yamaha SVHO pump strainer
Larger openings for increased water flow into the engine for lower engine temps
Suits any late model 160mm jet unit
ET 17lb Billet Supercharger Wheel SVHO
Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 17 lbs of boost @ 8500 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant)
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
WORX Yamaha 1.8L Dual cooling plate kit
Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into you Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
Billet anodized construction allowing 1,2 or 3 fittings to be installed
Fits all 1.8 Yamaha engines (may require o-ring for early models)
Allows for maximum cooling to the engine under high boost
Race proved in a closed course and endurance
WORX Yamaha Engine Cooling Adapter/Anodized
Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
WORX Yamaha 1.8L Pump wedge
Create more bow lift for less hull drag and increase in top speed
One piece billet anodized construction.
2020 Yamaha SVHO 160mm Pump Upgrade
Upgrade your SHVO/SHO pump to the new 2020 SVHO pump!
The new 2020 SVHO pump has a 160mm stator. The 2020 SVHO pump uses a one piece housing for both the impeller and wear ring.
The kit will include all bearings, o-rings, oil seals, and spacer you need to transfer your existing driveshaft over to the new 2020 pump housing.
PLEASE TAKE NOTE: If you have an SHO ski you will need to purchase a SVHO driveshaft for this to work. Please email us email@example.com if you have a SHO and need a driveshaft.
Fizzle Yamaha Intercooler Tubing Upgrade Kit with TiAL BOV
NOTE:Stock plastic air-box must be removed in order to create clearance for the TiAL Blow Off Valve.
Improve reliability and performance by replacing the soft and flimsy stock rubber intercooler hoses with the Fizzle heavy-duty reinforced tubing kit for your Yamaha SHO/SVHO watercraft. Fits all supercharged Waverunners and jet boats 2008-2019. Includes a genuine 50mm TiAL blow-off valve.
Enables you to run a blow-off valve to relieve excess pressure in off-throttle situations
Increased throttle response
5-ply heavy duty silicone construction
Internal metal reinforcement
High-quality marine-grade 316 Stainless Steel hose clamps included
JL AUDIO® SlamPak System for Yamaha FX WaveRunners - Black/White
Designed for Yamaha FX WaveRunners, this all-new system delivers a powerful audio option never before seen on PWC. This JL AUDIO® SlamPak™ is sure to transform your WaveRunner into a serious music machine, adding even more enjoyment to every minute you spend on the water.
Also includes plug-and-play harness with Deutsche connectors, marine-grade circuit breaker, power cable, speaker cable, audio cable, stainless steel mounting brackets, and hardware
Pair of waterproof VeX™ speaker pods houses two high-performance 6.5" marine-grade coaxial speakers to deliver loud, clean audio in real-world marine environments
Neatly tucked away, is a custom-formed Stealthbox® subwoofer system, equipped with a potent 8.8" marine subwoofer, generating powerful bass and optimized for open-air environments
Compact, 500 watt, 4-channel amplifier to power the entire system
MBT-CRX Bluetooth® controller/receiver connects to your Bluetooth® device and accesses your playlist wirelessly
Exceeds industry standards for corrosion resistance and UV exposure
YAMAHA 160MM STAINLESS STEEL WEAR RING (REPLACES OEM # 6ET-51312-00-00)
100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble-free use. Directly replaces OEM part# 6ET-51312-00-00.
2008-2014 will need to use the updated 160mm Impeller
ODI ROGUE NO FLANGE LOCK-ON GRIPS BLACK/SILVER 130MM
Requires WR06032 Worx Yamaha Bar Extensions.
ODI RUFFIAN NO FLANGE LOCK-ON GRIP BLACK/BLACK 130MM
Requires WR06032 Worx Yamaha Bar Extensions.
ET SVHO 26lb GEN2 wheel
Yamaha SVHO E-T S/C Wheel
ET 26LB GEN2 Billet Supercharger Wheel
Yamaha SVHO FZR FZS S/C 26lb GEN2 14 g lighter
Race-proven the ultimate limited Supercharger wheel.
Engine-tech has been working on this update and is now complete. The results are outstanding lower out temps increased midrange and more boost. Lighter by 14 grams to increase clutch life. 26 lbs of boost @ 8500 rpm. Machined using a 5 axis CNC machining center allows a blade accuracy of .0002. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).
New Yamaha Genuine OEM replacement supercharger clutch. Used on all Yamaha 1.8L SVHO engines. New oil pump assembly gasket is required when replacing this clutch. (part# 6S5-13563-00-00)
WORX Yamaha Fuel Pressure Reg 1.8L
In the tank, replacement increases fuel pressure approx 10psi
Cost effective alternative to External fuel regulator
Ideal for Low boost applications and reflashed/ aftermarket ECU
WORX Yamaha Free Flow Exhaust SHO/SVHO
Allows removal of restrictive sound suppression baffles in the exhaust.
This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.
This is a must for any modified personal watercraft.
WORX Yamaha Pump Cooling Plate Single
Yamaha Single fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.