Our Stage 1 Kit is a BMS Racing reflash with no other performance parts. You will see a huge improvement over acceleration and a top speed increase of 9 MPH!
Broward Motorsports Racing Yamaha SVHO/SHO TiAL Blow-Off Valve Kit
Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit. Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.
-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry
- 4-Ply silicone hose
-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.
-Get greater reliability by reducing wear to your clutch and engine components.
-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.
NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020
BMS Racing Yamaha Titanium Valve Retainers Kit 1.8L SVHO/SHO
BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS.
All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors
WORX Yamaha Air Filter Kit All 1.8L SHO/SVHO
Our WORX Racing Yamaha 1.8 Air filter kit.
Allows maximum airflow to your engine removing restrictive OEM paper filter
Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
Billet anodized 4-inch adaptor mounts easily to the hull
Silicone molded hose the tapers down to suit the supercharger with a smooth internal bore to eliminate any intake turbulence
Increased acceleration and overall RPM’s
Works great combined with (WR04001) Ribbon Removal for maximum airflow into your engine
Race-proven design a must for and Modified/ Race watercraft
Engine Breather filter also provided in the kit
WORX Insert Edition Sponsons for GP1800/VX
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
FOR 17+ GP1800 / 11+ VXR,VXS
Includes backing rails and all necessary hardware.
Product benefits include:
- Greater stability
- Improved cornering
- Superior handling
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Includes authentic TiAL or HKS (your choice) blow off valve
Gain 2-3+ MPH top speed over OEM Yamaha SHO or SVHO intercooler
Gain 200-300+ peak RPMs, acceleration and throttle response
Kit Contents: The intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008-2019, including FZR, FZS, GP1800, FX SHO, and FX SVHO models and supercharged Yamaha Jet Boats
Solas Impeller Shaft Holder WR014H
Impeller Shaft Holder
Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.
SVHO ET Billet Water-Cooled Front Supercharger Housing Black
SVHO Watercooled Front Supercharger Housing.
All new made from billet 6061-t6 machined with 5 axis machining center.
New design higher airflow increases boost by 1 psi.
Watercooled for less heat fade longer bearing life keeps the main housing cooler.
Color Red,Blue,Black, or Clear.
Solas Yamaha 160MM Concord 13/18 Impeller
The new Solas Concord YV-CD-13/18 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.
WORX Yamaha Engine Cooling Kit
Suits all SVHO Yamaha models including 2018+ models with updated pump strainer
WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed ‘extra cooling’ when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance. Hi-flow intake screen allows for an increase in water flow levels to all engine and associated components.
Kit includes all necessary fittings, hoses, gaskets and clamps, bolts you need.
1/2 inch hose and fittings. Suitable for Stock and mild and heavily modified applications (eg. filter, reflash, upgrade supercharger, etc.)
A must for skis with re-programmed ECU and higher RPM limit, or operating in hotter climates.
Solas Yamaha 160MM Concord 13/20 Impeller
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 13/20 variable pitch impeller works great with stock through Stage 2 modifications.
WORX Yamaha Free Flow Exhaust SHO/SVHO
Allows removal of restrictive sound suppression baffles in the exhaust.
This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.
This is a must for any modified personal watercraft.
WORX Exhaust Kit SVHO GP1800/ FX 12+/ VXR,VXS 15+
Our Yamaha 2015+ VXR/VXS, FX SVHO rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.
Molded Black silicone hose for easy install Billet anodized black 3-inch exhaust outlet Billet anodized block off plate Eliminates restrictive sound suppression baffles Silicone hose reduces exhaust resonance and droning A must for High horsepower/ Racecraft
NGK LFR7A Spark Plugs - Yamaha SVHO Engines
NEW OEM Spark plugs for Yamaha 1.8L SVHO supercharged motors
ET 17lb Billet Supercharger Wheel SVHO
Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 17 lbs of boost @ 8500 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant)
Billet Engine coupler 2008+ FZR, FZS, FX, FX SHO
Billet Drive coupler for Yamaha 1.8 Engine
Fits any 1.8 Yamaha Engine
Billet construction huge strength upgrade over stock cast unit
Utilizes OEM rubber coupler
A must for any High Horsepower/ Race watercraft
WORX Intake Grate for GP1800/VXR,VXS
The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.
Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximizes acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all-around handling of this boat.
Worx Racing Components are proudly Australian made.
WR04019 YAMAHA 2020 COOLING KIT
Suits all SVHO Yamaha models including 2020+ models with updated pump strainer
WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed ‘extra cooling’ when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance. Hi flow intake screen allows for increase in water flow levels to all engine and associated components.
Kit includes all necessary Fittings, hoses, gaskets and clamps, bolts you need.
1/2 inch hose and fittings. Suitable for Stock and mild and heavily modified applications (eg Filter, reflash, Upgrade supercharger etc)
A must for skis with re-programmed ECU and higher RPM limit, or operating in hotter climates.
Yamaha Flush Kit
The Replacement Flush Hose features a swivel hose fitting. These flush hoses fit all late-model WaveRunners and Yamaha Boats that were equipped with factory flush kits. Available in red or blue.
YAMAHA 160MM STAINLESS STEEL WEAR RING (REPLACES OEM # 6ET-51312-00-00)
100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble-free use. Directly replaces OEM part# 6ET-51312-00-00.
2008-2014 will need to use the updated 160mm Impeller
WORX Yamaha Fuel Pressure Reg 1.8L
In the tank, replacement increases fuel pressure approx 10psi
Cost effective alternative to External fuel regulator
Ideal for Low boost applications and reflashed/ aftermarket ECU
WORX Yamaha Pump Cooling Plate Dual
Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.
BRASS FITTINGS NOT INCLUDED.
WORX Yamaha Supercharger Rebuild Kit
Includes all bearing and plates that are not available to buy separately OEM
SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
WORX Yamaha Engine Cooling Adapter/Anodized
Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
WORX Yamaha 1.8L bar extension suit OEM bars/ODI grips
Billet anodized construction
Allows fitment of 130mm ODI lock grips
Billet endcap design to prevent grip sliding off if lock clamp fails
NOTE: Grips NOT Included
WORX Pump Seal Kit for GP1800, VXR 2015+
Yamaha Pump Plug Kit WR07010, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.
This kit goes perfectly with the Worx Scoop Grate WR246 (also for the Yamaha 17-19 GP1800/VXR VXS 15+.)
The Kit is easy to fit and provides an immediate improvement on stock.
ARP Flywheel bolt kit
High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.
ODI ROGUE NO FLANGE LOCK-ON GRIPS BLACK/SILVER 130MM
Requires WR06032 Worx Yamaha Bar Extensions.
ODI RUFFIAN NO FLANGE LOCK-ON GRIP BLACK/BLACK 130MM
Requires WR06032 Worx Yamaha Bar Extensions.
ET SVHO 26lb GEN2 wheel
Yamaha SVHO E-T S/C Wheel
ET 26LB GEN2 Billet Supercharger Wheel
Yamaha SVHO FZR FZS S/C 26lb GEN2 14 g lighter
Race-proven the ultimate limited Supercharger wheel.
Engine-tech has been working on this update and is now complete. The results are outstanding lower out temps increased midrange and more boost. Lighter by 14 grams to increase clutch life. 26 lbs of boost @ 8500 rpm. Machined using a 5 axis CNC machining center allows a blade accuracy of .0002. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).