Broward Motorsports Racing Yamaha SVHO/SHO TiAL Blow-Off Valve Kit
Improve your superchargers clutch life and reliability with this BMS Racing 50MM Blow-Off Valve Kit. Blow-Off unwanted boost pressure during off-throttle operation. This kit will help with supercharger clutch and gear life.
-BMS Racing 50mm TiAL Blow-off valve the biggest in the industry
- 4-Ply silicone hose
-Aluminum mounting flange machined with grooves to guarantee it won’t slide out.
-Get greater reliability by reducing wear to your clutch and engine components.
-Works on all Yamaha supercharged skis from 2008-present SVHO/SHO.
NOTE: Must remove stock plastic air box in order to use this BMS Racing Blow-off valve kit. Can upgrade to a WORX Racing Air Filter Kit WR04020
BMS Racing Yamaha Titanium Valve Retainers Kit 1.8L SVHO/SHO
BMS Racing titanium valve retainer upgrade kit. This kit increases the reliability of your engine by reducing the possibility of valve float at higher than stock rpm. The kit Includes 16 lightweight titanium valve retainers. A must for Yamaha’s 1.8L motors that are revving higher then 8500 RPMS.
All 2008 - 2020 1.8L SVHO/ SHO / 1.8L HO Motors
WORX Yamaha Air Filter Kit All 1.8L SHO/SVHO
Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.
Allows maximum Air flow to your engine removing restrictive OEM paper filter
Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
Billet anodized 4-inch adaptor mounts easily to hull
Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
Increased acceleration and overall RPM’s
Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
Race proven design a must for and Modified/ Race watercraft
Engine Breather filter also provided in kit
Solas Impeller Shaft Holder WR014H
Impeller Shaft Holder
Fits Solas Yamaha YV, YS Dynafly, YS Concord, and YS-TP series impeller shafts.
Fizzle Y1000 Yamaha Intercooler Kit w/ TiAL BOV, or HKS BOV
Typical top speed gains 3+ MPH over OEM Yamaha SHO or SVHO intercooler
Includes 50mm TiAL style or 35mm HKS style (your choice) blow off valve flange attached to the intercooler or select the blow off valve option of your choice
Typical peak RPM gains 250-300+, acceleration and throttle response
Kit Contents: The Fizzle Y1000 intercooler with blow-off valve flange, full piping kit, mounting bracket system, and cooling line fittings
Fits all supercharged Yamaha watercraft 2008 to present, including FZR, FZS, GP1800, FX SHO and SVHO models and supercharged Yamaha Jet Boats
WORX Insert Edition Sponsons for GP1800/VX
Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style!
FOR 17+ GP1800 / 11+ VXR,VXS
Includes backing rails and all necessary hardware.
Product benefits include:
- Greater stability
- Improved cornering
- Superior handling
2020 Yamaha SVHO 160mm Pump Upgrade
**PLEASE NOTE THESE PUMPS ARE NOT IN STOCK AND MAY BE ON BACKORDER THROUGH YAMAHA**
Upgrade your SHVO/SHO pump to the new 2020 SVHO pump!
The new 2020 SVHO pump has a 160mm stator. The 2020 SVHO pump uses a one piece housing for both the impeller and wear ring.
The kit will include all bearings, o-rings, oil seals, and spacer you need to transfer your existing driveshaft over to the new 2020 pump housing.
PLEASE TAKE NOTE: If you have an SHO ski you will need to purchase a SVHO driveshaft for this to work. Please email us email@example.com if you have a SHO and need a driveshaft.
Solas Yamaha 160MM Concord 13/18 Impeller
The new Solas Concord YV-CD-13/18 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.
WORX Yamaha Trim Extension All RiDE models only NEW
Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas
Increases trim range to bring the nose of your ski higher and increase speed!
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 13/20 variable pitch impeller works great with stock through Stage 2 modifications.
WORX Yamaha Free Flow Exhaust SHO/SVHO
Allows removal of restrictive sound suppression baffles in the exhaust.
This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.
This is a must for any modified personal watercraft.
WORX Yamaha Rear Exhaust Kit 2008-2018
Our 2008+ Yamaha GP1800 FX, FZ & 2015+ VXR/VXS rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.
Molded Black silicone hose for easy install Billet anodized black 3 inch exhaust outlet Billet anodized block off plate Eliminates restrictive sound suppression baffles Silicone hose reduces exhaust resonance and droning A must for High horsepower/ Race craft
WORX WR06028 YAMAHA DROP IN STEERING STEM GP1800, VX,VXR, EX
Constructed from Marine Grade 6061 Aluminum for superior strength
Retains original throttle/steering sensors
Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
Designed for racing and can be used for recreational, too
GP1800 2017+ | VXR/VXS 15+ | EX SERIES 17+
Cover plate and hardware included (cover plate for GP/VXR models only)
ET 17lb Billet Supercharger Wheel SVHO
Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 17 lbs of boost @ 8500 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant)
Billet Engine coupler 2008+ FZR, FZS, FX, FX SHO
Billet Drive coupler for Yamaha 1.8 Engine
Fits any 1.8 Yamaha Engine
Billet construction huge strength upgrade over stock cast unit
Utilizes OEM rubber coupler
A must for any High Horsepower/ Race watercraft
WORX Yamaha Blow Off Valve Assembly 1.8L SHO/SVHO
Our cost-effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
Easy install to OEM location
Lightweight billet construction less load on the hose to reduce fatigue and tearing
Easy to disassemble for cleaning and maintenance
Cost effective upgrade for stock or modified skis
WORX Intake Grate for GP1800/VXR,VXS
The Yamaha GP1800 SVHO, 2015+ VXR is the ultimate fun machine and it is with great excitement Worx Racing Components bring to you their WR246 Intake Grate designed specifically for this new model. This intake grate is a must have for both recreational riders and racers wanting to get the very best from their new GP1800 or VXR.
Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximizes acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when towing water skiers or other water toys. In testing, Worx owner Gary Watson discovered that this grate paired with Worx sponsons (WR552-I) completely transformed the all-around handling of this boat.
Worx Racing Components are proudly Australian made.
SVHO ET Billet Water-Cooled Front Supercharger Housing Black
SVHO Watercooled Front Supercharger Housing.
All new made from billet 6061-t6 machined with 5 axis machining center.
New design higher airflow increases boost by 1 psi.
Watercooled for less heat fade longer bearing life keeps the main housing cooler.
Color Red,Blue,Black, or Clear.
JL AUDIO SlamPak System for Yamaha VX WaveRunners - Black/White
Designed for Yamaha VX WaveRunners, this all-new system delivers a powerful audio option never before seen on PWC’s. This JL AUDIO® SlamPak® is sure to transform your WaveRunner into a serious music machine, adding even more enjoyment to every minute you spend on the water. A pair of waterproof VeX™ speaker pods house high-performance 6.5” marine-grade coaxial speakers that deliver loud, clean audio in real-world marine environments. Compact, 500 W, 4-channel amplifier powers the entire system. MBT-CRX Bluetooth® controller/receiver connects to your Bluetooth® device and accesses your playlist wirelessly.
Exceeds industry standards for corrosion resistance and UV-exposure. Also includes a plug-and-play harness with Deutsch connectors, marine-grade circuit breaker and cables, stainless steel mounting brackets, all hardware, and installation instructions. Dealer installation recommended.
YAMAHA 160MM STAINLESS STEEL WEAR RING (REPLACES OEM # 6ET-51312-00-00)
100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble-free use. Directly replaces OEM part# 6ET-51312-00-00.
2008-2014 will need to use the updated 160mm Impeller
Looking to add extra grip to your lake-ride or race-ski? Hydro-Turf mats are specially made with a unique textured design for added traction and are made of durable, thick, high-density, water resistant, UV resistant, easy to install peel and stick foam material.
Hydroturf mats feature a deeply grooved, no absorbent, non-slip surface for supreme comfort, excellent grip, maximum traction, and ultimate performance. Whether you need racing tray mats, freestyle tray mats or just recreational mats – Hydro-Turf mats offer excellent grip and footing in the slippery foot wells of your personal watercraft. Hydro-turf traction allows you to push harder and take your riding to the next level.
All HydroTurf mats come equipped with Super tough high-grade 3M Peel & Stick PSA (Pressure Sensitive Adhesive). Simply peel off the sticker backing and apply pressure to the mat to adhere it to your watercraft footwells & rear deck. While not mandatory, we recommend allowing the adhesive to set for around 12-24 hours after adhesion for best results.
Hydro-Turf mats also come in a variety of colors and grooves for your personal watercraft. All mats are available with grooves in either Cut Groove or Cut Diamond, with hundreds of color combinations available in each cut. Hydroturf colors come in duo-tone (color with black or white grooves), marbled, camo pattern, or flat color. With hundreds of mats variations available for any year, make, and model, there is no limit to the amount of customizability available for your watercraft.
Superior Traction for Performance Riding.
Hundreds of Custom Colors & Groove Patterns
Superior Strength 3M PSA (Pressure Sensitive Adhesion).
Available for all Yamaha, Sea-Doo, Kawasaki, & Honda PWCs
Note:Images are an approximate rendering of the final product. Color or location of the logo may vary depending on the manufacturing process. Hydro-Turf colors may look different in various lighting conditions. Hydro-Turf will not warranty the following colors from fading (Lime Green, Orange, Red, Pink, Yellow, and Yellow Camo). With hundreds of colors, patterns, grooves, and styles there is something here for everyone.
WORX Yamaha Pump Cooling Plate Dual
Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.
BRASS FITTINGS NOT INCLUDED.
WORX Yamaha Supercharger Rebuild Kit
Includes all bearing and plates that are not available to buy separately OEM
SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.
New thrust plate, bearing and rings to suit OEM and aftermarket shafts
Service kit for worn or failed chargers
NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed.
WORX Yamaha 1.8L Intercooler Kit
The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit. The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.
The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.
New Anodised core!!!!
Huge internal core element for increased airflow and denser air
Extremely lower air intake temps over OEM cooler
Huge HP gains up to 45+ Horsepower in certain applications
Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
Upright element and water flow for increased heat transfer and efficiency
Upright mounting allows water to completely drain from the unit after use
Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
Complete Independent Intercooler cooling kit upgrade for lower air temps
Note* May required adjustment of reverse cable mounting for early model FX 08-11
Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
WORX Yamaha 1.8L bar extension suit OEM bars/ODI grips
Billet anodized construction
Allows fitment of 130mm ODI lock grips
Billet endcap design to prevent grip sliding off if lock clamp fails
NOTE: Grips NOT Included
WORX Pump Seal Kit for GP1800, VXR 2015+
Yamaha Pump Plug Kit WR07010, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system.
This kit goes perfectly with the Worx Scoop Grate WR246 (also for the Yamaha 17-19 GP1800/VXR VXS 15+.)
The Kit is easy to fit and provides an immediate improvement on stock.
WORX Yamaha 1.8L Pump wedge
These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!
2 DEG Billet anodized pump wedge
Promotes bow lift to increase top speed from 1 to 2 mph
Higher nose ride height allows for dryer ride
Cost effective upgrade for better handling and top speed
Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.