Description 

Includes all bearing and plates that are not available to buy separately OEM

SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed. 

Description 

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tailwhips and aerial moves

Please note we do NOT recommend this plate for racing or high-speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Description 

Larger openings for increased water flow into the engine for lower engine temps

Suits any late model 160mm jet unit

Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas

Increases trim range to bring the nose of your ski higher and increase speed!

Note: Only Suits Yamaha Models WITH RiDE 

Click Here To Download WR06021 Instructions

The Better Way To Experience A Seadoo!

You're looking to give your ski a nice tone while not sounding obnoxious?

It's time to upgrade to the brand new Worx Rear Exhaust Kit for the 2020+ GTR & 2018+ RXTX. This kit greatly improves the tone of your ski whilst also providing a slight increase in performance.

Constructed from Bulletproof Anodized Billet Aluminum, the Exhaust outlet provides a clean yet subtle look to the rear of the ski, instantly recognizable with the Worx logo from any position. 

This kit includes everything you need to get your ski sounding grunty and smooth!

Includes:

• Exhaust Outlet
  
• Silicon Hose
  
• Retainer Ring
  
• M6 x 30mm Bolts

Instructions

• Bracket for GP AIR FILTER "(WR04020-GP)".
• Converts WR04020-FX to WR04020-GP. 

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Billet Hi flow replacement for restrictive OEM plastic pump strainer.

Larger openings for increased water flow into engine for lower engine temps.

One fitting.

Fits all 2020+ SVHO

Whether you're a recreational rider or a serious racer, the Yamaha 2021+ GP1800 Steering Stem is the perfect upgrade to promote a better riding position. Crafted from Marine Grade 6061 aluminum, it's built to be strong and durable, so you can ride with confidence.

Designed with racing in mind, this steering stem fits 7/8 handlebars and the kit comes equipped with Pro-Taper Carmichael Handlebars. But even if you're not a racer, the enhanced riding position can make all the difference for a more comfortable and enjoyable ride.

And with its black anodized finish, this steering stem not only improves your ride, but also adds a sleek and stylish touch to your watercraft. Don't settle for a subpar riding experience – upgrade to the Yamaha 2021+ GP1800 Steering Stem today and take your ride to the next level!

Fits: 2021-2023 Yamaha GP1800 AND FX

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore molded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodized 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodized 4-inch adaptor mounts easily to hull
• Silicone molded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Description 

Specifically designed for the 2012 Yamaha FX SHO hull.

Benefits include:

- Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!!

- Superior hook up

- Better bow lift for top speed 

- Smoother turning

- Utilize WORX Pump Plug kit WR0703

Each paper based service manual includes a Table of Contents and index which include an exploded view of parts disassembly sequence, bolt torques, thread sizes, and page references to descriptions in text. Service and repair instruction includes disassembly/reassembly, inspection, testing/troubleshooting, repair and adjustments with information on Special Tools, Specifications, Fault Codes, Maintenance Schedule, Engine, Engine Cooling, Fuel/Emissions, Steering, and Hull Components.

Applications:

2014 YAMAHA FX SHO (1.8L)
2014 YAMAHA FX HO (1.8L)
2014 YAMAHA FX CRUISER SHO (1.8L)
2014 YAMAHA FX CRUISER HO (1.8L)
2013 YAMAHA FX SHO (1.8L)
2013 YAMAHA FX HO (1.8L)
2013 YAMAHA FX CRUISER SHO (1.8L)
2013 YAMAHA FX CRUISER HO (1.8L)
2012 YAMAHA FX SHO (1.8L)
2012 YAMAHA FX HO (1.8L)
2012 YAMAHA FX CRUISER SHO (1.8L)
2012 YAMAHA FX CRUISER HO (1.8L)

• Versatile multi-use platform to enhance on-water versatility
• Full-length reboarding ladder integration
• Tracks to accept other accessories
• MarineMat deck
• 4 cleats to accept Multi-Use Rack and/or other accessories

FITS:

FX CRUISER HO 2019-2023
FX CRUISER SVHO 2019-2023
FX CRUSIER HO AUDIO 2023
FX CRUSIER SVHO AUDIO 2023
FX HO 2019-2023
FX HO AUDIO 2023
FX LIMITED SVHO 2019-2023
FX SVHO 2019-2023
FX SVHO AUDIO 2022-23

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR556-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 12-23 FX and 14-16 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximized top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Worx's new Yamaha Oil Catch-Can collects excess oil vapors that would otherwise pass through your engine's air intake. The oils condense in the Catch-Can for easy periodic emptying through our convenient, bottom-mounted brass drainage plug. This catch-can is extremely easy to install and can either be used in conjunction with our recommended performance Yamaha Air Filters or as a standalone solution with OEM parts.

Extend the life of your ski and maintain performance with this affordable catch-can, a must for any PWC rider that wants to look after their ski!

✓ - Ensures Consistent Performance

✓ - Improves Engine Efficiency

✓ - Aluminium Billet Construction

✓ - Convenient Bottom Mounted Drainage Plug

✓ - Fast & Easy Installation

The innovative RecDeck platform integrates with the swim platform and reboarding ladder for a wide range of new accessory packages that expand the versatility of the VX/GP line.

Increase your wet storage capacity with our large 50 liter RecDeck Stern Mounted Storage. Mounts with no drilling required and features durable, weather resistant compression-molded black EVA foam and (2) side rod holders. The bag allows access to the stern tow point for watersports usage without needing to be removed. Compatible with existing VX Cooler Bag.

Must have the VX Rec Deck