Fits 2019 Yamaha FX HO and FX SVHO non-cruiser models.

Please call 800-940-3000 or email info@bms-racing.com for custom orders.

You can view available colors and materials Here

Description

Fits 2017-2019 Yamaha FGP1800 and 2015-2019 VXR

Please call 800-940-3000 or email info@bms-racing.com for custom orders.

You can view available colors and materials Here

BMS has designed the strongest and lightest billet aluminum flywheel for the Kawasaki 1100 2 stroke engine.  It has been tested and proven year over year with the best racers around the world.  Top engine builder Tim Judge from Judge Motorsports only uses this flywheel for his engine builds.  No other flywheel on the market can withstand the abuse!

This flywheel includes the necessary magnet to run the MSD ignition system.  It is completely balanced to eliminate any vibration or unnecessary bearing wear.

BMS has designed the strongest and lightest billet aluminum flywheel for the Kawasaki 1100 2-stroke engine.  It has been proven year over year with the best racers around the world.  Top engine builder Tim Judge of Judge Motorsports only uses this flywheel for his engine builds.  No other flywheel on the market can withstand the abuse!

This flywheel includes the pick up gear for the MoTec ignition system.  It also is completely balanced to eliminate any vibration or unnecessary bearing wear.

Yuasa lead acid batteries are standard equipment on all Yamaha Watercraft. Batteries are activated with a wet acid (not included if shipped) and must be charged before use. Can be shipped UPS dry.

SHIPS DRY WITHOUT BATTERY ACID

Fits all Yamaha models
Battery Details:

Description 

Designed for full adjustability with the ideal position being dependent on the rider weight, riding style and the type of riding they are doing:
- For maximum top speed in calm water position your blades in the fully forward position
- For maximum handling and hook up the fully back position is best

Description 

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Description 

WR06014-iBR-KIT

NEW REVISED DESIGN!

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

Includes WORX All NEW Billet anodized Electronic throttle lever and brake lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

WR06014-ET

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Allows you to use higher quality aftermarket 7/8" diameter handlebars to a bend that suits your riding style.

Description 

WORX Racing Sea-Doo Performance Air filter kits allow maximum airflow to feed your high-performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose, and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4-inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for the saltwater environment.
• CNC Billet anodized 4-inch adaptor mounts easily to the hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4-inch hose with the ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in the kit.
• NEW Purpose Designed hull mounting bracket that fits hull (requires drilling 2 x 6mm holes to mount bracket)
• SUITS 2018+ RXTX 300 ST3 and GTX Lim 300 ST3 Hulls ONLY

A must for any Modified/ High Horsepower application for maximum fuel delivery

Increased fuel delivery for high boost/ high RPM engines

Requires remapped ECU or Aftermarket ECU to operate

The kit comes with all required Hardware and adaptors (3 injector kits included)

Description 

Full set of 12 CNC machined retainers manufactured from high strength and hardened aerospace certified titanium alloy. Designed to add strength while offering weight reduction, all of our titanium retainers are finished to precise tolerances.

A must for any Sea-Doo looking to rev over 8400 rpm

Perfect to use in combination with any 8400+ rpm tune

Suits ALL Sea-Doo 4-Tec 1503cc and ACE 1630cc Engines

Description 

• 16-16.5 lbs @ 8650 RPM
• 18lbs @ 9000rpm
• Kit comes with Impeller, spacer and modified front housing
• NOTE: REQUIRES MACHINING OF REAR HOUSING

Description

11 lbs of boost @ 8100 rpm and 12.5 @ 8600rpm There is no other drop in that is even close to the acceleration and boost of this S/C impeller setup (42lb injectors)

Description 

ET 137 4MM CR Drop in Wheel for the 255/260. Light edition Billet impeller with 4mm spacer. This is a completely new design from the ground up taller blade hight, lighter, New aggressive blade geometry. There is no other drop-in Wheel that is even close to the acceleration and boost of this ET S/C impeller setup. You will have to add a fuel pressure regulator. Not included. most all 260's come with 48lb injectors. If you have a 255 then you may also have to add 48lb injectors depend on the year. Not included.

13 to13.5lb of boost @ 8100 rpm and 15lb + @ 8500rpm

(Clutch slip must be set to 15-foot lbs and 48lb injectors.) Includes 4mm spacer.

Description 

Engine-tech has been working on this project for quite some time and is now complete. The results are outstanding 19 lbs of boost @ 8500 rpm. Machined from billet 7075-T651 using a 5 axis CNC machining center allows a  blade accuracy of .001. Balance to a spec of .009 inch gram and comes completely anodized gold for protection against the elements(corrosion resistant).

Requires a aftermarket shaft. 

Description

Adding more volume of air for acceleration and 2-3 lbs of boost 11.3 lbs @ 7700 rpm and 14lbs at 8450 This will be a drop in. We have made this wheel 25% lighter than stock. This is a billet wheel made from 7075 T651 and machined on a 5 axis CNC machining center with a blade accuracy of .001 in and also hard anodized for corrosion resistance and balanced to a spec of .008 grin. This wheel works with the PowerShot fuel controller no other fuel requirements needed.             

Hands down this are the lightest and highest performing low boost stock ECU  wheel on the market.

WORX Recommends the use of a Cooling upgrade with the use if any upgraded Supercharger wheel and reflash!