Benefits of this intake grate include:
- Reduced porpoising
- Minimal to zero top speed loss (up to 3mph gain in choppy conditions!)
- Greater control & turning capability

Instructions

Fitment

• 1976-1995 Kawasaki

These model skis have a very flat intake area that lose hook up in anything but perfect conditions. To get any sort of performance from these two boats an intake grate is absolutely essential.

The major performance benefit of our WR202 is improved hook up in all water conditions. It will transform your boat in choppy and rough conditions by reducing cavitation and keeping the pump fully loaded.

Instructions

Fitment

• 1986-1995 Kawasaki

This was the first of the larger stand-up Jet Ski produced by Kawasaki and dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. This intake grate was designed when all of the pro riders were riding this model Kawasaki, it will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns

Instructions

Fitment

• 1992-1997 Kawasaki

• This ride plate is a direct bolt on replacement
• The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in rough water and promotes better hook up and drive

Instructions

Fitment

• 1992-1997 Kawasaki

This was amongst the first models of larger stand-up Jet Ski's produced by Kawasaki who dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. Designed initially when all of the pro riders were riding this model Kawasaki, this intake grate will transform your boats performance in all water conditions, with increased pump loading and allowing you to keep full power even on those really tight turns.

Instructions

Fitment

• 1995-1997 Kawasaki

This ride plate is a direct bolt on replacement for all recreational or competition SXI's allowing most riders to ride faster while expending less energy.

- Extra length holds the boat a lot flatter
- Hard chine lines on the edges of the plate make it a lot easier to carve those really tight turns in complete control
- Incorporates our famous 'D' cut which picks up water when you push the boat in hard turns and gives it a lot more stability and less tendency to slide out. The bevelled edge on the 'D' cut-out help to hold the boat flatter and gives you a lot better drive and control.

Instructions

Fitment

• 1987-1997, 1999-2002 Kawasaki

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR508 Sponsons.

Made for Kawasaki ZXI 900/1100 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

• 1995-2003 Kawasaki

This intake grate combats the boats tendency to porpoise when you are riding two up, holding the boat a lot flatter on the water and will improve handling and hook up. Combine with Worx Sponsons WR513 for ultimate handling and performance.

Instructions

Fitment

• 1995-2006 Kawasaki

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR504 Sponsons!

Made for Seadoo 92-96 SP, SPI, XP, SPX models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1992-1997 Sea-Doo

The Worx WR212 will give you great hook up in all water conditions with no cavitation off the mark no matter how hard you accelerate, and in the rough water you will gain drive and control.

Instructions

Fitment

• 1993-2003 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR506 Sponsons!

Made for Seadoo HX models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1995-1997 Sea-Doo

This intake grate fits a number of the Seadoo models from the single rider HX as well as several of the three seater boats through to the 97 GTI.
It will improve hook up and cornering ability allowing you to ride the boat hard into tight turns and keep your pump fully loaded.

Instructions

Fitment

• 1992-1997 Sea-Doo

Fitment

• 1991-2011 Sea-Doo

This was the first of our new generation intake grates that changed the old compromise theory that a good rough water intake grate would always cost you top end speed. Worx changed all of that by producing an intake grate that not only gave the best hook up in all conditions but also increased top speed. Independent tests rated this Worx grate as best in the world with two speed gains of two to three mph.
This intake grate boosts the performance of this boat in all water conditions with top speed gains even in flat calm water conditions. With a revolutionary design, it has an aircraft wing style shape in the centre of the two bars which enhances performance in the straights and similar shaped wings on the outside that come into play when you lean the boat in the turns.

Instructions

Fitment

• 1989-1998 Sea-Doo

Sea-Doo Start/ Stop switch housing

- Solid billet anodised construction

- Utilises small Sea-Doo Switch panel and late model (thick) red button

- 2 piece bar clamp style for adjustability

- Great for start/stop button on custom skis/ launch control button etc

- Can be used on either side of handle bars

Fitment

• 1989-2020 Sea-Doo

These hull extensions bolt right into factory mounting holes to effectively extend the working length of your boat by approx. 20%. The difference is very noticeable, you get on the plane quicker, no more porposing in choppy water your boat will run straight and true with no top speed loss.

Instructions

Fitment

• 1991-2004 Sea-Doo

This grate is a must to get the best from your boat! Designed to give your pump excellent loading in all water conditions, it will not cost you speed in the calm and will make a night and day difference in choppy to rough conditions.

Instructions

Fitment

• 1991-2002 Sea-Doo

WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Used by all Pro National and World Lites class Champions 

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for more aggressive hook up. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts like a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.??

Instructions

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

Sick of your stock plastic pump shoe bending, cracking, or breaking when you really put the pedal to the metal? Yeah, we get it. That's why we designed the Worx Racing cast aluminium pump shoe, the last pump shoe upgrade you'll need for your stand-up.

This thing can take the heat, the load, and the big hits from your freestyle engine. Our pump shoe is pre-drilled and tapped but as it is a cast part, some minor modifications may be needed.

Whether you’re pushing it to the limit or simply craving reliability, this pump shoe works with large winged aftermarket intake grates for max efficiency and zero sacrifice in performance. Fits all Yamaha Superjets and most aftermarket hulls.

? Tough as Nails – Cast aluminium construction built for high speeds and heavy-duty use.
? Max Efficiency – Works with aftermarket intake grates for ultimate jet pump performance.
? Built to Last – Say goodbye to plastic and hello to reliable, long-lasting strength.

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet, SHO

Worx Racing WR544 Yamaha Superjet Sponsons are designed specifically to increase the handling performance of Yamaha Superjet Jetski's. Easily one of the easiest parts to upgrade on your ski. Worx recommend sponsons as one of the first upgrades to your ski. 

Adjustable to individual riding style and ability, these Superjet sponsons are perfect for any Jetski enthusiast, whether you're just out on the weekend with your mates, or riding professionally. And because they're compatible with various aftermarket hulls, you can be sure they're the right call. 

Constructed from Marine Grade Aluminium, this sponson set will have you running rings around your mates!

Instructions

Fitment

• 1990-2020, 2023-2025 Yamaha
• 1990-2020, 2023-2025 Yamaha Superjet