These boats hook up pretty well in the calm but really benefit from our intake grate in choppy to rough water, the Worx intake grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and reduce cavitation.

Instructions

Fitment

• 2006-2010 Sea-Doo

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2008-2011 Yamaha FX SHO

Parts Included 

Our  Launch Kit sets the ultimate foundation for any one wanting to upgrade their Superjet. We have all of your handling needs covered. This kit includes:

* Our famous WR228 Intake Grate designed with a deeper scoop for improved hook up and turning for all styles of riding

* Our best selling WR312 Intake Grate  for greater stability, drive and control

* WR544 Sponsons constructed from marine grade aluminum and adjustable to suit your style of riding

* WR04041  Exhaust Sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Model Fitment

Yamaha Superjet 2008-2020

Parts Included

Description

This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy.

The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling in several ways:
1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts, the 'D' cut out bites into the water pulling the boat back down which let's the pump get better hook-up and drive
2. When you are cornering hard the 'D' cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out

Instructions

Fitment

• 2000-2002, 2006-2011 Kawasaki

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drive out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2006-2011 Kawasaki

The largest of the Kawasaki range, the STX introduced in 2000 as a two stroke and then in later models fitted with the 12F and 15F four stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 1997-2020 Kawasaki

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR527-I Sponsons!

Made for Kawasaki STX12F and 15F Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Designed for full adjustability, these sponsons put your ride, completely in your hands! Not only is the paddle height adjustable but the forward and backward positioning options means that, for maximum top speed in calm water you can position your blades in the fully forward position or for maximum handling and hook up the fully back position is best!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 1997-2010 Kawasaki

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Instructions

Fitment

• 2006-2011 Kawasaki

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR528 Sponsons!

Made for Kawasaki SX-R 800 Sponsons models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Designed to work perfectly paired with the WR310 or WR311 ride plates and WR222 or WR225 intake grates!

Theses sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come into play when the boat is leaned over into the corners. The sponsons hold the ski on line in even the hardest turns and make getting those really tight corners look easy.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Paddles
• All Fasteners Needed

Instructions

Fitment

• 2003-2011 Kawasaki

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up. 

Instructions

Fitment

• 2007-2020 Kawasaki

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

• 2005-2020 Sea-Doo
• 2005-2020 Sea-Doo 4-TEC

Fitment

• 1991-2011 Sea-Doo

WORX Racing NEW Performance Sea-Doo 4-tec Intercooler provides huge gains over OEM Intercooler providing a cooler denser air to the engine increasing horsepower! The 30% larger wider core allows for better heat transfer of compressed air from supercharger or turbo charger before entering engine. WORX Racing NEW Sea-Doo intercooler is a direct replacement of all Sea-Doo 4-tec external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleed on front of unit and a replaceable sacrificial anode to extend intercooler life.

On certain older models, where the OEM pressure bleed is not present, some extra modification may be required to suit.

Fitment

• 2004-2015 Sea-Doo
• 2004-2015 Sea-Doo 4-TEC

Ready to unleash that signature throaty sound????? This rear exhaust kit delivers bold performance and an aggressive tone—whether you're tearing it up on race day or chasing thrills on the weekend.

Features:

? 2.5 inch black anodised billet outlet – built tough, looks tougher

? Moulded silicone hose – eliminates resonance for that deep, clean growl

? Standard outlet block-off included – everything you need in one kit

? Deletes factory sound suppression baffles – for unrestricted flow and max attitude

? Suitable for recreational and race skis

? Fits GTR, GTI, RXPX T3 Hull, and early 4-Tec models

? Note: OPAS removal may be required prior to install

?? Does NOT fit S3 hull skis or new RXPX 300 models

This exhaust was originally designed for a 2012 RXPX. Fitment has been confirmed across many models. However, some recent models may require the alternate block-off kit (WR04013-2), which blocks the exhaust from the inside of the hull.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

The RXP is the ultimate fun machine! Supercharged, intercooler, 215 HP it is a blast to ride!
These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water. The Worx grate will not cost you any top speed in the calm but will give you heaps better hook up and drive in the rough and around the track for closed course racing. This grate has two bars running the full length of the boat that hang down and stop the back of the boat from sliding out, the centre blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.
Pair with our WR540 Sponsons for winning results!

Instructions

Fitment

• 2004-2008 Sea-Doo

Benefits include:
- Greater control and turning capability
- Enhanced hook up
- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2011 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR540-I Sponsons!

Made for Seadoo RXP/RXT/GTX/GTI models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• 2002-2010 Sea-Doo

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• Purpose designed hull mounting bracket that fits to hull with no drilling required

Seadoo Air Filters can be a little confusing. Please feel free to email us or phone if you would like further clarification, we would love to help!

Fitment

• 2008-2015 Sea-Doo
• 2008-2015 Sea-Doo RXTX, 4-TEC

Sea-Doo Start/ Stop switch housing

- Solid billet anodised construction

- Utilises small Sea-Doo Switch panel and late model (thick) red button

- 2 piece bar clamp style for adjustability

- Great for start/stop button on custom skis/ launch control button etc

- Can be used on either side of handle bars

Fitment

• 1989-2020 Sea-Doo

Fitment

• 2008-2015 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Also includes bonus Impeller tool!

Includes:

• SXX-CD-13/16
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Includes:

• SXX-CD-13/18
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2008-2020 Sea-Doo

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR554-I sponsons are the perfect upgrade for your Yamaha ski!

Made for Yamaha 08-11 FX and 09-13 FZ models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Enhanced control, stability and predictability, the ski stays hooked and does not throw you off
• Stops the ski from sinking in the back in tight turns like stock sponsons
• Allows for Greater corner entry speed
• Maximised top speed performance by creating less drag
• Superior straight line stability
• Easy installation to stock mounting points
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2008-2011 Yamaha

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

Fitment

• 2008-2020 Yamaha

• Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into your Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
• Billet anodised construction allowing 1,2 or 3 fittings to be installed
• Fits all 1.8 Yamaha engines (may require o-ring for early models)
• Allows for maximum cooling to engine under high boost
• Race proven in closed course and endurance

Suggested Routing:

Fitment

• 2008-2020 Yamaha

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha SVHO, SHO

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha SVHO, SHO

• 2 DEG Billet anodised pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Instructions

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha SHO, SVHO

 Suits all 1.8 Yamaha Supercharged models excluding 18 models with plastic manifold. (Ribbon delete does not suit plastic manifold models)

Air Filter Kit: Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easy secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodised 4-inch adaptor mounts easily to hull
• Silicone moulded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximum air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Ribbon: Replaces the restrictive mesh element in the intake manifold.
It increases air flow to the engine, maximising horsepower.
Constructed from billet for extra durability and strength
Tapered design to allow more air flow

PLEASE NOTICE, THIS ITEM DOES NOT SUIT 18+ PLASTIC INTAKE MANIFOLD SKIS

Blow off Valve: Our cost effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
Easy install to OEM location
Lightweight billet construction less load on hose to reduce fatigue and tearing
Easy to dissemble for cleaning and maintenance

Instructions

Instructions

Fitment

• 2008-2020 Yamaha

• In tank replacement increases fuel pressure approx 10psi
• Cost effective alternative to External fuel regulator
• Ideal for Low boost applications and reflashed/ aftermarket ECU

Instructions

Fitment

• 2008-2020 Yamaha

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum air flow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows a extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add a extra 45+HP to your water craft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps.

Specifications

• New Anodised core!!!!

  • Huge internal core element for increased air flow and denser air
  • Extremely lower air intake temps over OEM cooler
  • Huge HP gains up to 45+ Horsepower in certain applications
  • Removable bracket, silicone hoses and necessary hardware all INCLUDED for easy install
  • Upright element and water flow for increased heat transfer and efficiency
  • Upright mounting allows water to complete drain from unit after use
  • Blow off Valve INCLUDED in kit to help supercharger reliability and performance
  • Complete Independent Intercooler cooling kit upgrade for lower air temps

Parts Included 

Intercooler core

Blow off valve

Top intercooler hose

Instructions

• A must for any Modified/ High Horsepower application for maximum fuel delivery
• Increased fuel delivery for high boost/ high RPM engines
• Requires remapped ECU or Aftermarket ECU to operate
• Kit comes with all required Hardware and  adaptors (includes 4 injector kits to suit Yamaha 1.8)

Fitment

• 2008-2020 Yamaha

Larger openings for increased water flow into engine for lower engine temps

Suits any late model 155mm jet unit

Fitment

• 2008-2016 Yamaha
• 2008-2016 Yamaha SHO

Our WORX Racing Yamaha 1.8 Air filter kit allows maximum air flow to your engine via a Huge 4-inch flame arrestor. Our tapered smooth bore moulded silicone hose fits directly onto your Yamaha OEM supercharger front housing for easy installation and our Billet anodised 4 inch air filter bracket is easily secured to the hull in a dry but accessible location.

• Allows maximum Air flow to your engine removing restrictive OEM paper filter
• Huge 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment J 1928 Approved USCG
• Billet anodised 4-inch adaptor mounts easily to hull
• Silicone moulded hose the tapers down to suit the supercharger with smooth internal bore to eliminate any intake turbulence
• Increased acceleration and overall RPM’s
• Works great combined with (WR04001) Ribbon Removal for maximium air flow into your engine
• Race proven design a must for and Modified/ Race watercraft
• Engine Breather filter also provided in kit

Instructions

Fitment

• 2008-2020 Yamaha

• Billet Drive coupler for Yamaha 1.8 Engine
• Fits any 1.8 Yamaha Engine
• Billet construction huge strength upgrade over stock cast unit
• Utilises OEM rubber coupler
• A must for any High Horsepower/ Race watercraft

Fitment

• 2008-2020 Yamaha

The Worx Yamaha Blow Off Valve 'V2' has arrived!

New & Improved doesn't begin to describe it. Featuring a larger valve for increased air dispersal, improved reliability and a stylish new design; this blow off valve will be a welcome addition to any Yamaha 1.8L Ski!

Adding this blow off valve to your ski will greatly improve supercharger clutch life in your 1.8L engine, keeping you on the water having fun, for years to come. This kit includes all parts necessary for easy 5 minute installation, requiring only some cutters, a socket and Phillips head. These blow off valves, have been tried and tested as art of Worx Racing's famous Yamaha Intercooler Kit, and now you can buy them on their own!

Worx Racing know that you want to get out on the water as soon as possible, so this Blow Off Valve comes preset to our recommended length, but the adjustment screw can be easily adjusted to suit your specific ski.

• Greatly improves supercharger clutch life. 
  
• 5 Minute installation. 
  
• Lightweight construction for increase hose life
• Easy to dissemble for cleaning and maintenance
• Low cost and easy installation for any stock or modified craft
  

If wanting to fit a TIAL Blow Off Valve we have made an adaptor. So you can still use the existing host kit. CLICK HERE for the Adaptor. 

Instructions

Fitment

• 2008-2020 Yamaha

WORX Racing Yamaha 1.8 engine cooling upgrade kit provides the much needed ‘extra cooling’ when modifying your watercraft. Our WORX Racing cooling kit allows the addition of an extra water line from the Jet unit which feeds directly into the Yamaha 1.8 engine block to significantly lower engine temperatures under load to increase engine reliability and performance.

Kit includes all necessary Fittings, hoses and clamps you need.  

1/2 hose and fittings. Suitable for Stock and mild applications (eg Filter, reflash etc)

A must for skis with re-programmed ECU and higher RPM limit

PLEASE SELECT YEAR MODEL OF SKI IN DROP DOWN MENU

Instructions

Fitment

• 2008-2017 Yamaha

Yamaha Dual fitting pump cooling plate kit. Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.

Fitment

• 2008-2020 Yamaha

Billet anodised fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.

Fitment

• 2008-2020 Yamaha

The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions.
The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.

Instructions

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha FX HO

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR529 Sponsons!

Made for Yamaha FX 140, FX HO models, these sponsons have been specifically designed to improve the handling performance of your Yamaha jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. With the adjustability of three positions, you can tailor the positioning to your riding style!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2004-2020 Yamaha
• 2004-2020 Yamaha FX HO

Benefits include:

- Greater control and turning capability

- Enhanced hook up

- Improved handling in choppy conditions

Instructions

Fitment

• 2008-2016 Yamaha
• 2008-2016 Yamaha FX SHO

Not having a WORX intake grate on a Yamaha GP, is like having a high performance sportscar on a wet road with bald tyres, it is just not possible to get the best from these boats.
Performance benefits of our WR218 include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water better giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the ski sliding out

 Fits GP800R, GP1200R, GP1300R

Instructions

Fitment

• 2000-2008 Yamaha

Fitment

• 2003-2008 Yamaha

Worx Racing Intake Manifold adaptor allows for easy upgrade and fitment of additional Worx Racing or other aftermarket parts!

With this intake manifold adaptor you're easily able to fit your Worx Blow Off Valve line directly into your manifold without needing to cut your map line sensor hose as would be otherwise required. This part also allows for easy fitment of an aftermarket boost gauge or rising fuel rate regulator.

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in kit

Instructions

Fitment

• 2008-2021, 2023-2025 Yamaha

• Tapered offset to match OEM reduction nozzle
• Creates even pressure in reduction nozzle too reduce pump cavitation
• Increased acceleration, drive and top speed
• Suits all ‘3 bolt’ 1.8 Yamaha pump models

Fitment

• 2008-2020 Yamaha

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Fitment

• 2008-2017 Yamaha

Yamaha Single fitting pump cooling plate kit. Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing an extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.

Fitment

• 2004-2020 Yamaha

WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Used by all Pro National and World Lites class Champions 

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for more aggressive hook up. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts like a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.??

Instructions

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet

Sick of your stock plastic pump shoe bending, cracking, or breaking when you really put the pedal to the metal? Yeah, we get it. That's why we designed the Worx Racing cast aluminium pump shoe, the last pump shoe upgrade you'll need for your stand-up.

This thing can take the heat, the load, and the big hits from your freestyle engine. Our pump shoe is pre-drilled and tapped but as it is a cast part, some minor modifications may be needed.

Whether you’re pushing it to the limit or simply craving reliability, this pump shoe works with large winged aftermarket intake grates for max efficiency and zero sacrifice in performance. Fits all Yamaha Superjets and most aftermarket hulls.

? Tough as Nails – Cast aluminium construction built for high speeds and heavy-duty use.
? Max Efficiency – Works with aftermarket intake grates for ultimate jet pump performance.
? Built to Last – Say goodbye to plastic and hello to reliable, long-lasting strength.

Fitment

• 1990-2020 Yamaha
• 1990-2020 Yamaha Superjet, SHO

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves

Please note we do NOT recommended this plate for racing or high speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Instructions

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha Superjet

Worx Racing WR544 Yamaha Superjet Sponsons are designed specifically to increase the handling performance of Yamaha Superjet Jetski's. Easily one of the easiest parts to upgrade on your ski. Worx recommend sponsons as one of the first upgrades to your ski. 

Adjustable to individual riding style and ability, these Superjet sponsons are perfect for any Jetski enthusiast, whether you're just out on the weekend with your mates, or riding professionally. And because they're compatible with various aftermarket hulls, you can be sure they're the right call. 

Constructed from Marine Grade Aluminium, this sponson set will have you running rings around your mates!

Instructions

Fitment

• 1990-2020, 2023-2025 Yamaha
• 1990-2020, 2023-2025 Yamaha Superjet