Our  Launch Kit sets the ultimate foundation for any one wanting to upgrade their Superjet. We have all of your handling needs covered. This kit includes:

* Our famous WR228 Intake Grate designed with a deeper scoop for improved hook up and turning for all styles of riding

* Our best selling WR312 Intake Grate  for greater stability, drive and control

* WR544 Sponsons constructed from marine grade aluminum and adjustable to suit your style of riding

* WR04041  Exhaust Sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Model Fitment

Yamaha Superjet 2008-2020

Parts Included

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR553-I Sponsons.

Made for Seadoo 2011-2019 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Select from 4 different positions to tune in the lean-in-handling characteristics of your jetski!

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Sea-Doo

Transform your Seadoo Spark in all water conditions improving drive, control and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Instructions

WORX Sea-Doo Free Flow Exhaust Elbow – 2016+ Models

A favourite among Sea-Doo owners, this is one of the quickest upgrades you can make! The WORX Free Flow Exhaust Elbow replaces the restrictive OEM sound suppression baffle in 2017+ models (excluding Spark) and 2016+ 300HP skis—giving your ride a louder, deeper exhaust note in just 15 minutes.

?? Quick & easy install – 15 mins
?? Tough black-coated aluminium
?? Improves sound + allows easier intercooler access
?? Guaranteed to turn heads on the water

Fits:
• 2016+ RXP-X, RXT-X, GTX LTD 300hp models
• 2017+ Naturally Aspirated GTI, GTR, GTX, GTI 900 ACE models (excludes Spark)

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2016-2020 Sea-Doo
• 2016-2020 Sea-Doo 4-TEC

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2017+ Yamaha GP1800 SVHO

Parts Included 

 Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

2017-2019 Seadoo GTR 230

Parts Included 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, RXPX, GTX models with new switch panels (LH side)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, GTX models with new switch panels (RH side with cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXPX 300 models with new switch panels (RH side WITHOUT cruise)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Fitment

• 2018-2020 Sea-Doo

Not happy with how your ski currently handles? Want to upgrade the look of your ski? Designed not just for cutting edge performance but killer style, the WR561-I sponsons are the perfect upgrade for your Seadoo ski!

Made for Seadoo RXTX 2018+ and RXP-X 2021+ models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. 

Worx Racing components WR561-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when you're off the throttle & entering the corner.

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Adjustable Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Does not fit GTX ST3/RXT 230 Models

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Download Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX, RXPX

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull (requires drilling 2 x 6mm holes to mount bracket)
• SUITS 2018+ RXTX 300 ST3 and GTX Lim 300 ST3 Hulls ONLY

Instructions

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo RXTX

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski race ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

Yamaha 2020 FX SVHO 

Parts Included 

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

4 inch supercharger adaptor
Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
Kanaflex flexible 4 inch hose with ribbed wall for strength.
All hardware, clamps and crankcase breather filter included in kit.
NEW Purpose Designed hull mounting bracket that fits to hull with no drilling

Instructions

Fitment

• 2020 Sea-Doo

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Fitment

• 2011-2021, 2023-2025 Sea-Doo

High Strength Bolt kit for direct replacement of OEM Flywheel bolts that are prone to failure on modified watercraft.

Suits all Yamaha 1.8 models

Suit SeaDoo 4-tec 1503 and 1630 ACE engine

Sold in Pack of 6

Instructions

Fitment

• 2020 Sea-Doo

Fortify your ride with this rugged panel! Designed for the Defender, it protects your bed wall and pairs perfectly with your favorite storage tools. Get ready to conquer!

Introducing the bold and robust Exterior Cargo Reinforcement Panel for the Can-Am Defender, designed specifically for the off-road enthusiast. This essential component attaches seamlessly to the bed side, delivering enhanced support and protection to your bed wall when in the outward position. Perfectly suited for use with the Hanging Storage Box and LinQ Tool Holder, this panel ensures your gear stays secure and organized during your wildest adventures. Crafted with durability in mind, it’s a must-have for those who demand performance and reliability from their Can-Am Defender. Plate that attaches to the bed side to further support and protect bed wall when in outward position. Recommended use of the Hanging Storage box and LinQ Tool Holder when installed outside of the bed wall.

Features:

• Plate that attaches to the bed side to further support and protect bed wall when in outward position. Recommended use of the Hanging Storage box and LinQ Tool Holder when installed outside of the bed wall.

Fitment / Fits on:

• Defender, Defender MAX (except 6x6 and PRO models)

Shipping weight: 2.619 lb

View installation instructions

Introducing the Tonneau Cover for Can-Am Defender 2018 & up. Keep your cargo box protected from splashes with this durable cover. Easily roll up for quick access, perfect for your side by side adventures.

Protect your cargo with the Can-Am Tonneau Cover for the Defender 2018 & up. Made to fit seamlessly, it shields your items from splashes, while allowing easy access with its roll-up design. This durable cover is a must-have for any Can-Am owner looking to keep their gear secure during rides. Please note it is not compatible with accessories exceeding the box height. Fitted to cover all of the items in your cargo box thoroughly. Prevents splash from entering the cargo box. Rolls up to the front. Easily removable for quick access. Not compatible with accessories that exceed the box height.

Features:

• Fitted to cover all of the items in your cargo box thoroughly. Prevents splash from entering the cargo box. Rolls up to the front. Easily removable for quick access. Not compatible with accessories that exceed the box height.

Benefits:

• ["Easy Installation","Foldable","Splash proof"]

Fitment / Fits on:

• Defender 2018 & up (except Mossy Oak Break-Up Country Camo model), Defender MAX

Shipping weight: 5.952 lb

View installation instructions

Illuminate your ride with style! This rugged rack is built for the 40" Baja Designs LED light bar, giving your Maverick X3 a fierce, race-ready edge.

Illuminate your off-road adventures with the Lonestar Racing 40'' (102 cm) LED Light Bar Rack, specifically designed for the Can-Am Maverick X3. This robust rack is tailored for the Baja Designs OnX6 Arc LED Light Bar, ensuring you have the brightest path ahead. Not only does it enhance the race-inspired aesthetic of your vehicle, but it also seamlessly integrates with various roof options, including the Aluminum and Lonestar Racing Aluminum Roofs. Please note, it’s not compatible with Racing Side Mirrors or the Audio Roof Flip Kit. Equip your Maverick X3 for the ultimate thrill! Designed for use with 40’’ (102 cm) Baja Designs OnX6 Arc LED Light Bar. Enhances the vehicle’s race-inspired look. Compatible with Aluminum Roof, Lonestar Racing Aluminum Roof and Sport Roof. Not compatible with Racing Side Mirrors and Powerflip Windshield (715002407). Lights sold separately. Not compatible with the Audio Roof Flip Kit.

Features:

• Designed for use with 40’’ (102 cm) Baja Designs OnX6 Arc LED Light Bar. Enhances the vehicle’s race-inspired look. Compatible with Aluminum Roof, Lonestar Racing Aluminum Roof and Sport Roof. Not compatible with Racing Side Mirrors and Powerflip Windshield (715002407). Lights sold separately. Not compatible with the Audio Roof Flip Kit.

Benefits:

• ["Improved stability","Reinforced Material","Weather-resistant"]

Fitment / Fits on:

• Maverick X3, Maverick X3 MAX

Shipping weight: 7.606 lb

View installation instructions

Stay safe and ride bold! This quick-release fire extinguisher support keeps your gear secure and accessible—because emergencies don’t wait.

Introducing the Lonestar Racing Fire Extinguisher Support for the Can-Am Maverick X3, your ultimate companion for off-road adventures. Crafted from durable billet anodized black aluminum, this robust support ensures your fire extinguisher is always within reach. The quick release feature allows for a swift slide-out in emergencies, providing peace of mind when you need it most. Designed to fit 1.85'' (4.7 cm) tubing, it can be mounted anywhere on the cage, giving you flexibility and safety on every ride. With included billet mounts, a quick-pull pin, a mounting plate, and two clamps, you can trust that your emergency equipment is secure and accessible. Stay bold, stay safe with Lonestar Racing for Can-Am! Quick release support that allows you to slide the fire extinguisher out in a matter of seconds in an emergency situation. Made of billet anodized black aluminum. Fits 1.85'' (4.7 cm) tubing. Can be fixed everywhere on the cage. Provides you with the safety and security of having dependable emergency equipment on board. Comes with both billet mounts, quick-pull pin, mounting plate and 2 clamps. Fire extinguisher sold separately. “Lonestar Racing for Can-Am” branded.

Features:

• Quick release support that allows you to slide the fire extinguisher out in a matter of seconds in an emergency situation. Made of billet anodized black aluminum. Fits 1.85'' (4.7 cm) tubing. Can be fixed everywhere on the cage. Provides you with the safety and security of having dependable emergency equipment on board. Comes with both billet mounts, quick-pull pin, mounting plate and 2 clamps. Fire extinguisher sold separately. “Lonestar Racing for Can-Am” branded.

Benefits:

• ["Adjustable","Easy Access"]

Fitment / Fits on:

• Maverick X3, Maverick X3 MAX

Installation complexity: 2

Shipping weight: 2.341 lb

View installation instructions

Illuminate your adventure with this rugged light rack, designed for the Maverick X3. Perfectly fits Baja Designs lights—light up the night and conquer the trails!

Illuminate your off-road adventures with the Lonestar Racing Light Rack for the Can-Am Maverick X3. Expertly crafted to accommodate up to two pairs of Baja Designs XL80 or XL Sport LED Lights, this robust light rack ensures you dominate the terrain, day or night. Designed for seamless compatibility with Lonestar Racing Aluminum Roofs, this accessory elevates your Maverick X3's functionality while maintaining a sleek look. Please note, it’s not compatible with Racing Side Mirrors or the Powerflip Windshield. Gear up and conquer the trails with confidence and style! Designed for use with Baja Designs XL80 LED Light and Baja Designs XL Sport LED Light. Accommodates up to two pairs of XL Lights. Compatible with Lonestar Racing Aluminum Roof, Aluminum Roof and Sport Roof. Not compatible with Racing Side Mirrors and Powerflip Windshield (715002407). Lights sold separately. Not compatible with the Audio Roof Flip Kit.

Features:

• Designed for use with Baja Designs XL80 LED Light and Baja Designs XL Sport LED Light. Accommodates up to two pairs of XL Lights. Compatible with Lonestar Racing Aluminum Roof, Aluminum Roof and Sport Roof. Not compatible with Racing Side Mirrors and Powerflip Windshield (715002407). Lights sold separately. Not compatible with the Audio Roof Flip Kit.

Benefits:

• ["Improved stability","Reinforced Material","Weather-resistant"]

Fitment / Fits on:

• Maverick X3, Maverick X3 MAX

Shipping weight: 7.767 lb

View installation instructions

Toughen up your ride with these race-engineered rock sliders. Stylish, durable, and essential protection for your Maverick X3's sides—because adventure waits for no one!

Introducing the Lonestar Racing Rock Sliders for the Can-Am Maverick X3—where durability meets style. These race-engineered rock sliders are crafted to Lonestar Racing's trademark standards, ensuring they can withstand the toughest terrains while adding a bold visual impact to your ride. Constructed from robust 1.5" diameter steel tubing and finished with a durable powder coat, they provide essential protection against large obstacles, safeguarding your vehicle's sides. Sold in pairs, these rock sliders are a must-have for any serious off-road enthusiast looking to elevate both performance and aesthetics. Race-engineered to Lonestar Racing’s trademark standards for toughness, these stylishly crafted accessories will also enhance your vehicle with visual impact. Made of 1.5"" (3.8 cm) diameter steel tubing with durable powder coat finish. Essential protection for your vehicle's sides from large obstacles. Sold in pairs.

Features:

• Race-engineered to Lonestar Racing’s trademark standards for toughness, these stylishly crafted accessories will also enhance your vehicle with visual impact. Made of 1.5"" (3.8 cm) diameter steel tubing with durable powder coat finish. Essential protection for your vehicle's sides from large obstacles. Sold in pairs.

Benefits:

• ["Reinforced Material","Vehicle Longevity Improved","Weather-resistant"]

Fitment / Fits on:

• Maverick X3 (except X rc models)

Shipping weight: 30.86 lb

View installation instructions

This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water.

If you want the ultimate in hook-up and handling this is the intake grate for you.
Designed specifically for choppy environments, this intake grate sacrifices a small amount of speed in favour of superior handling.

The WR248 has twin forward pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. This grate also has a  This new generation intake grate is an awesome addition and will benefit all riders from beginner to pro.

Instructions

Fitment

• 2017-2021 Kawasaki

The largest of the Kawasaki range, the STX introduced in 2000 as a two stroke and then in later models fitted with the 12F and 15F four stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out

Instructions

Fitment

• 1997-2020 Kawasaki

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up. 

Instructions

Fitment

• 2007-2020 Kawasaki

- Greater control and turning stability
- Enhanced hook up/ reduces cavitation
- Improved handling/drive in rough water conditions

Instructions

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

• 2 DEG Billet anodised pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR547-I Sponsons.

Made for Kawasaki Ultra 300/310 models, these sponsons have been specifically designed to improve the handling performance of your Kawasaki ski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2011-2020 Kawasaki
• 2011-2020 Kawasaki Ultra 300

Suits RXPX 300 T3 Hull and RXPX 260 T3 Hull models

Mounts to original backing rail.

Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! 

Adjustment of height means ability to control how much roll you want your watercraft to have entering a corner to suit your riding style.

Having the paddle close to vertical allows for more paddle grip and with Height Adjustability to control initial turn in and mid corner hold to suit your riding style.

Comes with backing rails and all necessary hardware!

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Want to feed your supercharger the air it craves? This WR04067 Worx Racing Air Filter Kit ditches the restrictive stock setup and delivers maximum airflow straight to your engine with a huge 4-inch flame arrestor. More air = more power, more acceleration, and higher RPMs, because fast should be faster.

?? NOW WITH RED INTERIOR! Tougher, more durable, and built for serious performance.

? Massive 4-Inch Flame Arrestor – More airflow, more power, plus a silicone end cap and stainless binding band for saltwater durability (J 1928 USCG Approved).
? Billet Anodized 4-Inch Adapter – Easily mounts to the hull in a dry but accessible location.
? Smooth Bore Silicone Hose – Tapers down for a seamless fit to your supercharger, eliminating intake turbulence.
? Instant Throttle Response – Increased acceleration and RPMs for an instant performance boost.
? Race-Proven Design – Built for modified and race watercraft that demand max performance.
? Engine Breather Filter Included – Because we thought of everything.

More air. More power. More speed. Upgrade now.

Instructions

Download Instructions

Fitment

• 2020 Sea-Doo
• 2020 Sea-Doo RXPX

Fitment

• 2018-2020 Sea-Doo
• 2018-2020 Sea-Doo GTR 230, RXTX

-160 Deg (ºF) thermostat a direct drop in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 degs (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Fitment

• 2005-2020 Sea-Doo
• 2005-2020 Sea-Doo 4-TEC

WORX Racing  All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iBR

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

WORX Racing All NEW Billet Anodised Throttle Electronic actuator housing which utilises OEM electronic actuators up on the handle bars (no throttle cables required),

- Billet anodised construction

- Utilises OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iTC

- Clamp on Handle bar design allows for adjustability of throttle position and angle

Fitment

• 2012-2020 Sea-Doo

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, flexible 4-inch Kanaflex hose and our tapered Supercharger mount. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Kanaflex flexible 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• Purpose designed hull mounting bracket that fits to hull with no drilling

Fitment

• 2011-2020 Sea-Doo
• 2011-2020 Sea-Doo 4-TEC

WORX Racing Performance Sea-Doo 300 ACE Intercooler provides huge gains over OEM Intercooler providing a cooler denser air to the engine increasing horsepower! WORX Racing Sea-Doo intercooler is a direct replacement of all Sea-Doo 300 ACE external intercoolers and is suitable for all applications from stock to open turbo watercraft. Unit comes with necessary water fittings to suit OEM cooling applications, pressure bleed on front of unit and a replaceable sacrificial anode to extend intercooler life.

Come with all brass ffitting included

Requires OEM exhaust sound suppression baffle to be removed to install. (WR04029 freeflow available)
Note: WR04060 Does not fit 2021 RXPX 300.

Fitment

• 2016-2020 Sea-Doo

Want to revive your old ski? Looking for a way to reignite your passion for the water? Look no further than Worx WR548-I Sponsons!

Made for Seadoo  RXPX 260/300 T3 models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

With the adjustability of four positions, you can tailor the positioning to your riding style! WORX Racing components WR548-I Sponsons are not just replacement paddles but also include an ‘Angle Cut Adjustable Backing Rail’ which runs parallel with the bottom of the ski and is designed to reduce nose pressure at high speeds and will let the nose settle down when your off the throttle entering the corner.

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Take your Sea-Doo to the next level with aggressive sound and performance.

? 2.5" Billet Exhaust Outlet – Precision-machined and anodised for durability and style
? Moulded Silicone Hose – Designed to eliminate resonance for a deep, throaty exhaust note
? OEM Block-Off Plug Included – Comes complete with standard outlet block-off
? Deletes Restrictive Baffles – Frees up your exhaust flow for improved performance
? Built for Power – Perfect for both recreational riders and racers alike
? Fitment – Suits Sea-Doo RXPX 300 and GTR 230 (2017+)

?? Note: For all other Sea-Doo 4Tec models (non-300), we recommend the WR04013 Exhaust Kit instead.

Disclaimer: Aftermarket exhausts (yep, including ours) are… wait for it… LOUD. If you like to make an entrance and be heard before you’re seen, you’re in the right place.

If your idea of fun is scenic detours and deep chats about fuel economy… stock’s probably more your speed ??

Instructions

Download Instructions

WORX Racing Sea-Doo Performance Air filter kits allows maximum air flow to feed your high performance engine via our huge WORX Racing 4 inch marine flame arrestor, easy mount adaptor, and specifically designed silicon hose. By removing restrictive OEM intake system and allowing filter placement in cooler areas inside the hull, this allows for lower intake temps resulting in better acceleration and an increase in top RPM’s.

• 4 inch supercharger adaptor
• Huge high flow 4-inch Flame arrestor with silicone end cap and stainless binding band idea for saltwater environment.
• CNC Billet anodised 4-inch adaptor mounts easily to hull with multiple mount points. Tapped ½ inch thread for extra fittings if required.
• Silicon 4 inch hose with ribbed wall for strength.
• All hardware, clamps and crankcase breather filter included in kit.
• NEW Purpose Designed hull mounting bracket that fits to hull with no drilling

Instructions

Fitment

• 2020 Sea-Doo
• 2020 Sea-Doo RXPX

Easily the first choice of Modification for your T3 Sea-Doo RXPX. This intake grate is years ahead of its rivals. During testing we found a 2mph speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the Seadoo T3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Used By Multiple World Champion James Bushell for his prestigious 158 performance model watercraft.
• Suits all RXPX 16+ 300Hp Models and 2012+ RXPX 260Hp Models (T3 Hull)

Instructions

Fitment

• 2012-2020 Sea-Doo
• 2012-2020 Sea-Doo RXPX

Easily the first choice of Modification for you ST3 Sea-Doo RXTX or GTR. During testing we found much great stability and hook up in rough conditions and an increased speed gain with reduced impeller slip (cavitation). This grate improves both the ride and the feel of the craft and compliments the SeaDoo ST3 hull extremely well.

• Redesigned for maximum hook up in Rough water conditions
• Increase in acceleration and straight line stability
• Reduced cavitation on take off
• Race proven design from stock class to open
• Suits all RXTX 18+ 300Hp ST3 HULL Models and GTX LIMITED, GTX 230, GTI 170 AND GTR 230 MODELS, ALSO SUITS 2020+ RXPX Models

Instructions

Download Instructions

Fitment

• 2018-2020, 2023 Sea-Doo
• 2018-2020, 2023 Sea-Doo RXTX, RXPX

Whether you've just hopped on your spark for the first time or been riding it for years and want to upgrade, this is the perfect tune for you! As one of the easiest upgrades to make, the upgrade process is super straightforward! All you have to do is remove your ECU, send/drop it in to us. We'll upgrade the ECU and send it back the same or next day we receive it!

This popular tune converts both 60Hp and 90Hp Seadoo sparks up to 110Hp!

It also opens up both sport and touring mode on your spark if this isn't something already enabled. During this process, all OEM gauge functions are retained.

For optimal performance, we recommend the following RPM limit tunes for ski conversions:

• For skis upgraded from 60HP to 90HP, a 8050 RPM limit tune is recommended.
• For skis upgraded from 90HP to 110HP, a 8550 RPM limit tune is recommended.

Benefits:

• Increased RPM limit
• Remove Throttle Restrictions
• Fuel Maps Improved
• Upgraded Ignition Timings
  
• Increase to Throttle Control & Reaction

While Worx Racing Components make their best effort to ensure our tune library is up to date, unfortunately due to shifts between models, even within the same year, some skis may differ slightly. In this case Worx will get back to you in a timely manner in the event that the Reflash may take longer than expected or not be able to be completed. 

PLEASE NOTE: This is a ECU reflash service performed on your stock ECU
Once you place your order please print the below ECU form and send the completed for with your ECU. WORX aim to perform this service the same or next business day the ECU is received and will return your ECU to you via a fully trackable overnight service.   

Please Print & complete the following form. We receive multiple ECU's each day. Completing the below form ensures quick and accurate turn around of each ECU reflash order.

Download Reflash Form/Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Our new Air Filter Kit for Seadoo Spark increases throttle response and overall power by opening up and allowing more air flow over the more restrictive OEM air box.
Includes: Anodised alloy tube, high-temp silicone coupler, US Coast Guard Approved marine grade Air Filter element, stainless steel hose clamps. 
 Suits ALL Spark models.
Install requires tools, we suggest taking a look at the install instructions before purchase to ensure you have what you will need. 

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

NOTE: Grips NOT Included 

Want your Spark to sound as good as it rides? Ditch the restrictive stock baffle and let your engine breathe with the Worx Racing Performance Exhaust Kit. More power, better throttle response, and a deep, throaty exhaust note that turns heads. Plus, that billet anodized rear exhaust outlet gives your ski a serious performance look, because fast should look fast.

NOW WITH RED INTERIOR! Improved durability and performance, because we know you like to push limits.

? More Power, More Noise – Improved exhaust flow for better throttle response across the rev range.
? Lightweight & Durable – Moulded silicone hose with new red interior for extra strength and longevity.
? Performance Look – Billet anodized rear exhaust outlet screams race-ready.
? Easy Install – Comes with all the hardware you need, no headaches, just horsepower.
? Fits 2-Seater Sparks – (DOES NOT FIT 3-SEATER MODELS. For that, check out the WR04008).

Bolt it on. Open it up. Ride harder.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Stock exhaust holding you back? Rip it out and let your Spark breathe, roar, and perform the way it should with the Worx Racing Freeflow Exhaust Kit. Designed to ditch that restrictive baffle, this kit boosts throttle response, cuts back pressure, and gives you that deep, aggressive exhaust note you want.

?? NOW WITH RED INTERIOR! Tougher, stronger, and built for max durability and performance.

? More Power, Less Restriction – Better flow means snappier throttle response and reduced back pressure.
? Lightweight & Durable – Moulded silicone hose with red interior for extra strength and longevity.
? OEM Fitment, Race-Ready Sound – Uses the factory exhaust exit location for easy, clean installation.
? Easy Install – Comes with everything you need—just bolt it up and send it.
? Fits 2 & 3-Seater Sparks – Including iBR models.

Rip, roar, and ride harder. Your Spark just got a serious attitude upgrade.

Heads up! All aftermarket exhausts (yep, even ours) are significantly louder than stock. 

If you’re keen to turn heads and sound like a total weapon, this is the upgrade for you.

If your idea of fun is peace, quiet, and hearing your own thoughts... stock’s calling. Probably with a cup of chamomile.

Instructions

Download Instructions

Replace brittle, ageing plastic with serious strength and style.
This 21-piece kit is crafted from 316 marine-grade stainless steel and designed to replace the centre motor section washers on your Sea-Doo Spark.

Tough enough for saltwater, built to last — and available in a range of anodised colours to match your personal style or ski setup.

Features:
• Replaces all washers in the centre motor section
• 316 marine-grade stainless steel for ultimate durability
• Anodised in a variety of colour options
• Precision fit – no mods or drilling required
• Clean, corrosion-resistant finish for a professional look

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Take your upgrade all the way with our complete 34-piece hull washer kit, replacing every stock plastic washer on your Sea-Doo Spark with premium stainless steel.

This full-kit option provides maximum durability, saltwater protection, and a fully colour-matched finish — front to back.

Features:
• Full replacement kit – 34 pieces to upgrade every hull washer
• Made from corrosion-resistant 316 stainless steel
• Available in multiple anodised colours to suit your ride
• Engineered for a perfect fit – no cutting, no fuss
• Ideal for high-performance use and long-term reliability

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better.
Partner it up with the Spark pump plug Kit and you're really moving.

This intake grate is a must have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake grate with more rigid Aluminium that will stand the test of time and will maximise overall handling and hook up in all water conditions.

• Increased acceleration and drive
• Reduced cavitation with increased efficiency
• Increase stability through cornering and rough water
• IJSBA legal in all classes
• Suits both 2/3 up models

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

You didn't buy a spark to turn into corners slowly, you didn't buy a spark to watch your mates have fun running rings around you. So do you really want to stick with your OEM sponsons? It's time to upgrade to Worx WR555 Sponsons!

Made for Seadoo Spark models, these sponsons have been specifically designed to improve the handling performance of your Seadoo jetski. 

With the adjustability of four positions, you can tailor the positioning to your riding style! Expect greatly improved direct response in cornering, more predictable handling AND greater straight line stability, especially in rough conditions. 

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Easy mount to OEM holes
• IJSBA Legal in all classes
• Race proven performance
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• All Fasteners Needed

Note: Before purchasing, check below that your OEM sponson mounting bolts match the backing rail bolt layout pictured below.

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Get the party started with our Upgrade Kits! Whether you're looking to just kick off your modifications or you're looking to get your ski races ready, these upgrade kits are the perfect package.

The combination of parts in each of these kits are perfectly designed to pair well and draw the maximum amount of performance out of your ski whilst still maintaining ski life. Each upgrade level is relatively easy to install for any mechanically minded individual!

Model Fitment

Seadoo Spark

Parts Included 

Sea-Doo Start/ Stop switch housing

- Solid billet anodised construction

- Utilises small Sea-Doo Switch panel and late model (thick) red button

- 2 piece bar clamp style for adjustability

- Great for start/stop button on custom skis/ launch control button etc

- Can be used on either side of handle bars

Fitment

• 1989-2020 Sea-Doo

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

The new Solas Concord SK-CD-12/14 is the recomended impeller for any Spark using any of the WORX/ RIVA/V-Tech aftermarket tunes. The new Solas 12/14 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed.

Solas SK-HS-140 Replacement Wear Ring for the Sea Doo Spark Replaces OEM Wear Ring.100% Stainless Steel - More durable than OEM. 

Also includes a bonus impeller removal tool!

Includes:

• SK-CD-12/14
  
• SK-HS-140
• WR001

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Elevate your Yamaha watercraft’s performance with the Solas YJ-CD-12/17 Concord Yamaha Impeller. Engineered to deliver exceptional acceleration, top speed, and handling, this high-performance impeller is the perfect upgrade for Yamaha enthusiasts seeking to enhance their riding experience and achieve maximum performance.

Key Features:

• Advanced Blade Design: The 12/17 pitch and innovative blade geometry deliver superior acceleration and increased top-end speed, optimizing your Yamaha’s performance on the water.
• High-Quality Construction: Crafted from durable, corrosion-resistant materials, this impeller is built to withstand harsh marine environments and provide long-lasting reliability.
• Precision Engineering: Ensures a perfect fit, reducing cavitation and enhancing overall ride quality while improving fuel efficiency.
• Optimized for Yamaha Models: Specifically designed to fit a wide range of Yamaha watercraft, ensuring seamless compatibility and enhanced performance.
• Easy Installation: User-friendly design allows for straightforward installation, making it accessible for both professional mechanics and DIY enthusiasts.

Benefits:

• Enhanced Performance: Experience a significant boost in acceleration and top speed, ideal for high-speed recreational riding and competitive racing.
• Improved Handling: The advanced blade design enhances handling and maneuverability, providing a smoother and more controlled ride.
• Increased Efficiency: The optimized design ensures efficient power delivery, reducing fuel consumption and extending engine life.
• Durable and Reliable: High-quality materials and precision construction ensure that this impeller will withstand the rigors of frequent use in various water conditions

?? You will require the WR001 Solas Spline Tool for Installation

Suits Following Models:

2021+ Superjet 

2017+ EX / EX Deluxe / EX Sport / EX Limited

Fitment

• 2017-2020 Yamaha

Instructions

Fitment

• 2014-2020 Sea-Doo
• 2014-2020 Sea-Doo Spark

Fitment

• 2008-2020 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner and already have or are considering purchasing an ECU reflash!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Also includes bonus Impeller tool!

Includes:

• SXX-CD-13/16
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

Larger blade are better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impellor. A must for Reflashed skis.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800

Fitment

• 2008-2020 Sea-Doo

This combo is perfect for anywhere looking to upgrade or update their Prop & Pump Liner!

Solas Concord 3 Blade Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

Solas SX-HS-161 Replacement Wear Ring for Sea Doo Replaces OEM Wear Ring.

100% Stainless Steel - More durable than OEM.

Specifically designed for the Seadoo  to be an OEM Replacement Wear Ring.
Fits all 300HP Model Seadoo Skis

Includes:

• SXX-CD-13/18
  
• SX-HS-161
• WR012

Fitment

• 2008-2020 Sea-Doo

Fitment

• 2009-2021, 2023 Yamaha
• 2009-2021, 2023 Yamaha FX HO, SHO, VXR, VXS

Larger blade are and better hub design for maximum performance. Pitched for more acceleration and top speed and RPM. This new prop easily out performs your OEM impeller.

Fitment

• 2014-2020 Yamaha
• 2014-2020 Yamaha FX SVHO, FZR, FZS, GP1800