Transform your Seadoo Spark in all water conditions improving drive, control and stability! A simple must have addition for anyone wanting top performance from this fun machine!

• Race proven  Seadoo Spark extended ride plate
• Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration
• Increase handling characteristics throughout cornering
• Better straight line drive and added stability
• Redesigned stepped centre section for increase top speeds...
• Easy fitment using standard mounting points.
• IJSBA legal all classes....
• DOES NOT SUIT IBR MODELS

Instructions

• This ride plate is a direct bolt on replacement
• The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in rough water and promotes better hook up and drive

Instructions

Fitment

• 1992-1997 Kawasaki

Description

This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy.

The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling in several ways:
1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts, the 'D' cut out bites into the water pulling the boat back down which let's the pump get better hook-up and drive
2. When you are cornering hard the 'D' cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out

Instructions

Fitment

• 2000-2002, 2006-2011 Kawasaki

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Instructions

Fitment

• 2006-2011 Kawasaki

This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out

The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you slam the boat into the hardest turns with confidence that you will be fully in control. The double concaves in the rear section also give you the extra bight needed to rail through the tightest turns.

Instructions

Fitment

• Kawasaki

This ride plate is a direct bolt on replacement for all recreational or competition SXI's allowing most riders to ride faster while expending less energy.

- Extra length holds the boat a lot flatter
- Hard chine lines on the edges of the plate make it a lot easier to carve those really tight turns in complete control
- Incorporates our famous 'D' cut which picks up water when you push the boat in hard turns and gives it a lot more stability and less tendency to slide out. The bevelled edge on the 'D' cut-out help to hold the boat flatter and gives you a lot better drive and control.

Instructions

Fitment

• 1987-1997, 1999-2002 Kawasaki

These hull extensions bolt right into factory mounting holes to effectively extend the working length of your boat by approx. 20%. The difference is very noticeable, you get on the plane quicker, no more porposing in choppy water your boat will run straight and true with no top speed loss.

Instructions

Fitment

• 1991-2004 Sea-Doo

Fitment

• 2015-2020 Yamaha
• 2015-2020 Yamaha GP1800, VXR

- Designed for 1991-07 Superjet

- "D" cut-out design allowing you to push the boat hard into turns and provides greater stability and less tendance to slide out

- Extra length to hold the boat flatter

- Bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts to lift under hard acceleration or in rough water, this helps to hold the boat flatter and give you a lot better drive and control  

- Hard chine lines on the edges of the plate that make it easier to carve those really tight turns with complete control

Instructions

Fitment

• Yamaha
• Yamaha Superjet

- Reduced length allows more control over ski in freestyle maneuvers while helping to keep hooked up during turns where the ski is leaned way over

- Designed by Freestylers for Freestyle

- Widely regarded as the best freestyle plate available for the Superjet

- “D” cut-out with the to keep the boat more stable in those difficult freestyle tricks

- Softer lines to help it slide out when you need it to

- Preferred choice for lighter stand-up riders and racers that find the longer plate difficult to ride in tighter rough race situations

Instructions

Fitment

• Yamaha
• Yamaha Superjet

Struggling to keep your Superjet under control? Yeah, we’ve seen it, bouncing around like a dolphin with too much caffeine.

That’s why we made the WR312 Ride Plate. Designed for superior grip, stability, and speed, this plate gives you the confidence to throw down tricks, carve tighter turns, and keep your ski planted instead of skipping across the water like a stone.

PLUS It now comes in black. 

? Precision Fit for 2008-2020 Superjet – Tailored design for seamless installation and optimal performance.
? Enhanced Drive & Control – Improved water flow and grip keep your ski planted through every turn.
? Greater Stability – Reduces hull movement for a smoother, more predictable ride.
? Durable Black Powder-Coated Finish – Upgraded for superior corrosion resistance, durability, and a sleek, race-ready look.

Instructions

Download Instructions

Fitment

• Yamaha
• Yamaha Superjet

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves

Please note we do NOT recommended this plate for racing or high speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Instructions

Fitment

• 2008-2020 Yamaha
• 2008-2020 Yamaha Superjet

Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf.

Instructions

Fitment

• Yamaha