• These Universal Barback Risers are designed to work on any bike with a stock 1 1/8" handlebar, parallel OEM bar clamps, and open mounting area
• Moves bar 1 ½" up and 1" back OR forward from the OEM position (can be installed facing either direction)
• Available in black anodized (matte finish), gunmetal grey (matte finish), or machine finish
• Machined from 6061-T6 Aircraft Grade Billet Aluminum
• Engraved Rox logo for a clean and understated “factory” look
• Includes all mounting hardware and instructions (visit Rox Youtube page for install video)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers
• These risers come with (2) step shims that allow the risers to mount to an OEM step down triple clamp as found on the Honda Africa Twin
• Made in the USA

Email Tristana@browardmotorsports.com

Heavy Duty Wearbar

• Wear-form steel construction
• Lasts up to 50% longer than standard wear bars

Pro Vantage power lift

• Effortlessly lifts your ATV plow without needing to use your winch
• Optimized lift speed for grading control.
• Screw-drive system has plenty of lifting power with low amp draw.

Power Pivot

Rotate yor plow blade up to 25 degrees at the push of a button, and without having to get up from your vehicle's seat. A powerful electric motor and durable 4-stage planetary geartrain lets you move a load, even while plowing. The unique locking design isolates the geartrain preventing slippage and creep under load. Plus, when necessary, the blade can still be positioned manually. The Power-Pivot will fit any WARN ATV  plow, (will not work on a UTV plow)

Snow Control Flap

• Flexible rubber top flap
• Controls snow kickback-keep snow on the ground, out of your face
• Fits all WARN ATV plows (cut to size)

Blade Side Wall

• Controls run off, and gives you scoop-like control of snow, and other materials
• Lets you gather material before depositing to the side
• Heavy duty steel construction

Plow Markers

• 2' high antenna
• Red rubber tipped for visibility
• Clearly mark the edge of your plow blade, even in deep snow
• Easy, bolt-on mounting

Lift Limit Control System

• Extends plow system life
• Protects your vehicle from impact and stops "over raised" conditions
• Allows you to fine tune system for a variety of stop positions

Pick Lift System

• Choose plow lift or winch option 

Email Tristana@browardmotorsports.com

• 3 Bit set replaces 17 individual drill bits (1/8" thru ¾")
• ¼" Hex shank, Titanium Nitride coated high speed steel
• Automatically de-burrs holes as you drill
• For use with metal, wood, plastic and fiberglass
• Starts on contact, no center punch needed
• Lifetime warranty

Email Tristana@browardmotorsports.com

• Designed by Yoshimura
• Lightweight stamped 6060 aluminum
• Black anodized aluminum license plate frame
• Screen printed Yoshimura logo
• Made in the USA!

Email Tristana@browardmotorsports.com

• Installs and removes piston rings from 3/64" thru 1/4" thick
• Vinyl grip handles
• Lifetime warranty

Email Tristana@browardmotorsports.com

• Slip joint design fits filters from 2" to 5½" in diameter
• Textured handles, durable gripping teeth
• Lifetime warranty

Email Tristana@browardmotorsports.com

• 6 Different sizes of cotter pins (560 pieces total) with a convenient storage box
• Sizes included: 1/16" x 1", 3/32" x 1", 3/32" x 1½", 1/8" x 1¼", 1/8" x 2" and 5/32" x 2½"

Email Tristana@browardmotorsports.com

• Exclusive “Smart Abrasive Technology” incorporates latest Nano abrasives.
• Progressive cutting action with no gritty mess.
• Levels and removes sand scratches.
• Excellent all around compound for removing severe swirls, defects, fading and water spotting.
• No wax, silicone or crystaline silica.
• Water-based for easy clean-up.
• Use with the WIZARDS^® Buffing Pad System.
• Marine use: Exterior defect removal on gelcoat, paint, fiberglass, metallic flake. Use on average or neglected surfaces.

Email Tristana@browardmotorsports.com

• Used to insert threaded rivet style fasteners into thin metal, plastic or fiberglass
• Includes rivet tool, 4 threaded mandrels, 10 of each size (SAE or metric) threaded rivets and blow molded storage case
• SAE sizes 6-32, 8-32, 10-24, ¼"-20
• Metric sizes 3mmX0.5, 4mmX0.7, 5mmX0.8, 6mmX1.0
• Replacement insert packs include 30 of each size threaded rivet listed above
• Lifetime warranty on rivet tool

Email Tristana@browardmotorsports.com

• High grade steel construction
• Quickly cleans ignition point contact surfaces
• Precise double cut file pattern
• Doubles as a light duty general purpose file
• Lifetime warranty

Email Tristana@browardmotorsports.com

• Used to insert threaded rivet style fasteners into thin metal, plastic or fiberglass
• Includes rivet tool, 4 threaded mandrels, 10 of each size (SAE or metric) threaded rivets and blow molded storage case
• SAE sizes 6-32, 8-32, 10-24, ¼"-20
• Metric sizes 3mmX0.5, 4mmX0.7, 5mmX0.8, 6mmX1.0
• Replacement insert packs include 30 of each size threaded rivet listed above
• Lifetime warranty on rivet tool

Email Tristana@browardmotorsports.com

4¼" x 1¼" Grey Foam (Final Finishing) pad.

• Saves time with expert results
• Use on all paints and hard surfaces
• Great for tight areas or spot repairs
• All pads use Velcro^® attachments
• Sold Each 

Email Tristana@browardmotorsports.com

• Used to insert threaded rivet style fasteners into thin metal, plastic or fiberglass
• Includes rivet tool, 4 threaded mandrels, 10 of each size (SAE or metric) threaded rivets and blow molded storage case
• SAE sizes 6-32, 8-32, 10-24, ¼"-20
• Metric sizes 3mmX0.5, 4mmX0.7, 5mmX0.8, 6mmX1.0
• Replacement insert packs include 30 of each size threaded rivet listed above
• Lifetime warranty on rivet tool

Email Tristana@browardmotorsports.com

• High impact ABS plastic housing
• Heavy duty steel mounting system
• Convex mirror surface
•  Shatter resistant safety glass
• Impact resistant bezel 

Email Tristana@browardmotorsports.com

 50,000+ Hour Lifespan

• 9-36 V DC

• Durable UV Polyester Powder Coat

• GORE® Pressure Equalizing Vent

• Harness & Dash Controller Included

• High-Grade Aluminum Alloy Heatsink

• Integrated Thermal Management System

• Impact Resistant Polycarbonate Lens

• IP68 Compliant – Dust / Water Ingress

• Mounting Brackets Included

• Over / Under Voltage Protection

• Op. Temp -40º F ~ +145º F / -40º C ~ +60º C

• Protected Against RFI / EMI

• Patented Technology

• Reverse Polarity Protection

• RoHS Compliant

• SAE J575 Compliant – Shock / Vibration

             Active View™ Technology -

Automatically Change Beam Patterns Based On Vehicle Speed

• Dash Controller & Under Dash Module with Wiring Harness

• Molded RIGID Dash Controller with 2 User Presets –

Preset Both Beam Pattern Mode & Accent Lighting Colors

• 8 Selectable Beam Patterns from 15-Degrees to 90-Degrees

• Integrated Optic Design with Spot, Flood, and Driving Zones

• Selectable RGB-W Accent Lighting – With User-Configuration,

Choose from any Color in the Light Spectrum

• Back Lit Molded Dash Controller -

Enables User to Select Mode, Accent Color, Adaptive Mode,

and Select Between 2 User Presets

• Multiple Mounting Locations; Traditional Side Mounting

or Underside Low-Profile *Stealth Mount *(Sold Separately)

• Patent-Pending Technology

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

Ultimax MAX

An improved version of the original revolutionary "Incredible Max" snowmobile belt. MAX is designed for long life and dependability on lower horsepower sleds. One Year Warranty. Proudly made in the USA.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• 15-25 Gallon corrosion resistant polyethylene tanks available
• Lower tank profile for improved stability
• Full drain out capability with molded in drain port, cap & tether
• Large pickup sump
• 5" Fill lid with tether
• Molded wand clips
• 12 volt diaphragm 1.0 G.P.M. high-flo pump
• 35 p.s.i.
• 18" Lever handgun with adjustable pattern tip w/ 15ft. handgun hose
• Max. Horizontal throw-30ft.Max vertical throw 18ft.
• Ready for Roundup®

* Must use 61-5437 spot sprayer with the 2.1 GPM pump

Email Tristana@browardmotorsports.com

Strider™ balance bikes are industry-leading training bikes that help children as young as 18 months learn to ride on two wheels. Strider balance bikes focus on the fundamentals of balancing, leaning, and steering without the distractions and complications of pedals or training wheels. The Striders’s simple, no-pedal design builds confidence and eliminates fear by allowing kids to have their feet on the ground and progress at their own pace. This unique design teaches young children balance on two wheels right from the start, avoiding developmental delays typical with tricycles and training-wheel bikes. Genuine Strider balance bikes are the lightest balance bikes in their category, have the lowest seat height (for the youngest starting age), and are tested to the most stringent safety standards. Frame-integrated footrests, proprietary components, and the ability to easily adjust to a growing child, make the Strider the only bike your child needs to develop their riding skills and successfully transfer onto their first pedal bike without training wheels.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Quality drive belt storage bag made from 900 Denier Polyester fabric with a heavy duty zipper
• Both hook-and-loop fasteners and grommet straps to secure it to your machine
• Keeps your spare belt clean, dry and secure
• Approximate Dimensions 19x10x2"

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

KOMODO TRAVEL BAG 

Made to the same exacting standards as our protective clothing, this robust holdall is large enough to carry every item of Motocross kit. Featuring tough 
materials and components throughout, the Komodo travel bag is built to carry the heaviest of loads, easily, securely and in comfort. Comes complete 
with handy wheels and straps for added practicality. 
• Dimensions: 94cm x 45cm x 40cm; capacity 150L.
• Lid opening for easy access to the main compartment.
• Flat top pocket to access documents while traveling.
• Removable change mat made from waterproof tarpaulin.
• Sturdy plastic YKK zipper chain.
• Lockable zippers – accepts TSA approved locks.
• Big screen print.
• 2 ventilation panels on sides.
• 2 big webbing handles on top and to side to be able to carry and move the bag.
• 2 strap handles to lift the bag and position it on the shoulder.
• Boots compartment with waterproof, removable bag, which is easier to wash.
• Reflective details.
• Smooth action outdoor rolling wheels. 
• Bottom and side panels made with waterproof tarpaulin ensures the bag always stays dry, even when standing in muddy terrain.
• Durable hard bumpers on base corners.
• Hard internal base with external slide rails. 
• Constructed from durable tarpaulin and tough polyester reinforcement panels.
• Sized to carry all protective gear.
• Compartment walls can be removed with a zipper to allow the bad to be reconfigured with one extra large internal compartment.
• Inner flat zippered mesh pocket on flap.
• 2 mesh pockets on internal sides of the bag.

GOANNA DUFFLE

Constructed from tough tarpaulin, the Goanna Duffle bag is waterproof, tough and spacious enough to securely carry every item of Motocross gear. The 
Goanna is a versatile bag and comes complete with a range of pockets and straps for ease of use.

• Dimensions: 82cm x 39cm x 45cm; capacity 125L.
• 1 flat front pocket to store documents and keys.
• 2 strap handles to lift up the bag and position it on the shoulder.
• Lid opening to easily and quickly access the main compartment.
• Inner flat zippered mesh pocket on flap.
• Boots compartment with waterproof removable bag for easy washing.
• 2 side handles to move the bag easily.
• Big screen print.
• Hi-visibility Alpinestars lining.
• Strong plastic YKK zipper chain; size 10mm.
• Bottom and side panels made with waterproof tarpaulin ensures the bag always stays dry, even when standing on muddy terrain.
• Webbing reinforcement gives the bag a better structure.
• Compartment walls can be removed to allow the bag to be reconfigured with one extra large internal compartment.

BOOT BAG

• 43cm height, 37cm length, 26cm width
• Durable 600 Denier Polyester main body material
• Tough tarpaulin material at base and lower sides is easy to clean
• Sized to fit Alpinestars motorcross boots up to size 14 (US)
• Piped seam construction for durability and additional wear resistance
• Large #10 YKK Coil zipper with double sliders and easy to grip Alpinestars molded pulls
• Webbing haul handle at top sewn in with heavy duty bar tacks
• Adjustable webbing should strap with D-Ring connections of either left or right side carry
• Large mesh vents for maximum airflow, lined with 210 denier polyester 
• Internal open mesh pocket with elastic top edge

Email Tristana@browardmotorsports.com

KOMODO TRAVEL BAG 

Made to the same exacting standards as our protective clothing, this robust holdall is large enough to carry every item of Motocross kit. Featuring tough 
materials and components throughout, the Komodo travel bag is built to carry the heaviest of loads, easily, securely and in comfort. Comes complete 
with handy wheels and straps for added practicality. 
• Dimensions: 94cm x 45cm x 40cm; capacity 150L.
• Lid opening for easy access to the main compartment.
• Flat top pocket to access documents while traveling.
• Removable change mat made from waterproof tarpaulin.
• Sturdy plastic YKK zipper chain.
• Lockable zippers – accepts TSA approved locks.
• Big screen print.
• 2 ventilation panels on sides.
• 2 big webbing handles on top and to side to be able to carry and move the bag.
• 2 strap handles to lift the bag and position it on the shoulder.
• Boots compartment with waterproof, removable bag, which is easier to wash.
• Reflective details.
• Smooth action outdoor rolling wheels. 
• Bottom and side panels made with waterproof tarpaulin ensures the bag always stays dry, even when standing in muddy terrain.
• Durable hard bumpers on base corners.
• Hard internal base with external slide rails. 
• Constructed from durable tarpaulin and tough polyester reinforcement panels.
• Sized to carry all protective gear.
• Compartment walls can be removed with a zipper to allow the bad to be reconfigured with one extra large internal compartment.
• Inner flat zippered mesh pocket on flap.
• 2 mesh pockets on internal sides of the bag.

GOANNA DUFFLE

Constructed from tough tarpaulin, the Goanna Duffle bag is waterproof, tough and spacious enough to securely carry every item of Motocross gear. The 
Goanna is a versatile bag and comes complete with a range of pockets and straps for ease of use.

• Dimensions: 82cm x 39cm x 45cm; capacity 125L.
• 1 flat front pocket to store documents and keys.
• 2 strap handles to lift up the bag and position it on the shoulder.
• Lid opening to easily and quickly access the main compartment.
• Inner flat zippered mesh pocket on flap.
• Boots compartment with waterproof removable bag for easy washing.
• 2 side handles to move the bag easily.
• Big screen print.
• Hi-visibility Alpinestars lining.
• Strong plastic YKK zipper chain; size 10mm.
• Bottom and side panels made with waterproof tarpaulin ensures the bag always stays dry, even when standing on muddy terrain.
• Webbing reinforcement gives the bag a better structure.
• Compartment walls can be removed to allow the bag to be reconfigured with one extra large internal compartment.

BOOT BAG

• 43cm height, 37cm length, 26cm width
• Durable 600 Denier Polyester main body material
• Tough tarpaulin material at base and lower sides is easy to clean
• Sized to fit Alpinestars motorcross boots up to size 14 (US)
• Piped seam construction for durability and additional wear resistance
• Large #10 YKK Coil zipper with double sliders and easy to grip Alpinestars molded pulls
• Webbing haul handle at top sewn in with heavy duty bar tacks
• Adjustable webbing should strap with D-Ring connections of either left or right side carry
• Large mesh vents for maximum airflow, lined with 210 denier polyester 
• Internal open mesh pocket with elastic top edge

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Made to the same exacting standards as our protective clothing, this robust holdall is large enough to carry every item of Motocross kit. Featuring tough materials and components throughout, the Komodo travel bag is built to carry the heaviest of loads, easily, securely and in comfort. Comes complete with handy wheels and straps for added practicality.

Email Tristana@browardmotorsports.com

Lightweight and highly ventilated, the Sequence Kidney Belt offers excellent support across the lower back and torso. Thanks to its ergonomic design, this belt freedom of movement and flexibility.

Email Tristana@browardmotorsports.com

The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system.

Email Tristana@browardmotorsports.com

With ergonomically profiled Level 1 CE certified protection securely held in position via a dual strap closure system, the Bionic Plus Elbow Protector incorporates 3D mesh and vented panels to prevent the build-up of heat. With an asymmetric and lightweight design plus strategic flexion channeling, this elbow protector provides high levels of freedom of movement and comfort.

Email Tristana@browardmotorsports.com

With ergonomically profiled Level 1 CE certified protection securely held in position via a dual strap closure system, the Bionic Plus Knee Protector incorporates 3D mesh and vented panels to prevent the build-up of heat. With an asymmetric and lightweight design plus strategic flexion channeling, this knee protector provides high levels of freedom of movement and comfort.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

Material: Genuine Leather. 4-way stretch panels.
Features: Perforated Top Panels. Finger pull tabs. Vibration dampening. Velcro cuff closure

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

For Rukus Wheel Inserts:

• Replacement wheel inserts for Rukus Wheels.
• Available in Grey, Red, Green and Blue.
• Includes hardware.

For 570-0025:

• Wheel cap spacer for Yamaha Viking/Wolverines

For 570-1238/570-1239:

• Replacement 14" beadlock ring
• Available in Black and Black/Machined

For 570-9111/570-9112:

• Replacement caps for Sedona Fusion Wheels
• X-style wheel caps for dual drilled wheels and regular wheel caps for singular bolt-pattern wheels

For 570-9114:

• Replacement Fusion 4/110 Center Cap Screws 
• M4X16 2pcs Black

For 570-9115:

• Replacement Adapt/Fusion 5/4.5 Center Cap Screws
• M4X14 2pcs Black

For 570-9120:

• Replacement Adapt/Fusion Dual Drill Center Cap
• Gloss Black

57-9407: 

• Single lug nut
• Chrome

57-94171:

• Box of 16 lug nuts
• Chrome

57-9409:

• Single lug nut
• Chrome

57-94137:

• Box of 16 lug nuts
• Chrome 

570-9419:

• Box of 16 lug nuts
• Chrome 

570-9419B:

• Box of 16 lug nuts
• Black

570-94121:

• Box of 16 lug nuts
• Chrome

570-94121B:

• Box of 16 lug nuts
• Black

570-94122:

• Box of 16 lug nuts
• Chrome 

57-94130:

• Box of 16 lug nuts
• Chrome 

570-94129:

• Box of 16 lug nuts
• Chrome 

570-94136:

• Box of 16 lug nuts
• Chrome 

570-94136B:

• Box of 16 lug nuts
• Black

570-94138:

• Box of 16 lug nuts
• Chrome 

570-94146B:

• Box of 100 lug nuts
• Black

570-94131:

• Box of 16 lug nuts
• Chrome 

570-94131B:

• Box of 16 lug nuts
• Black 

570-94139B:

• Box of 16 lug nuts
• Black 

570-94141B:

• Box of 16 lug nuts
• Black 

570-LUGKEY:

• Replacement lug key

570-0110:

• Replacement lug key for spike lug nuts

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com