Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Quick release cap with 3/8" x 24mm stud
• Simple pull of a pin to swap out flags
• Replacement quick release cap with 3/8" x 24mm stud
• Adapter cap tapped for 1/2" x 13mm stud to fit standard flags 
• Made from 6061 aluminum
• Made in the USA

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Replacement Yoshimura parts and packing keep your Yoshimura exhaust performing at its peak performance.

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

• High intensity Osram LEDs put out remarkable light at a longer distance with more lumens
• Stealth series offers a more sleek blacked out look without sacrificing light output
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving
• Indirect LED technology allows for less wasted light6000K color temperature gives off a bright white light that cuts through the darkness                                    
• Heavy-duty bezeless aluminum housing for the most rugged conditions
• Includes end mount and slider mounting brackets, wiring harness and switch
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

Made with tough and durable heat treated stainless steel. These 100% British made units are produced by EBC Brakes in the new Northampton plant using Premium quality German mill rolled steel, heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last. Any brake compound can be used but our recommended pad choices are shown below.

• Heat treated and tempered stainless steel
• Lightest weight profile with new Vee design
• Great looks for modern motocross machines
• Balanced front and rear designs

* Contour rotor not CX design 

Email Tristana@browardmotorsports.com

• High intensity Osram LEDs put out remarkable light at a longer distance with more lumens
• Stealth series offers a more sleek blacked out look without sacrificing light output
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving
• Indirect LED technology allows for less wasted light6000K color temperature gives off a bright white light that cuts through the darkness                                    
• Heavy-duty bezeless aluminum housing for the most rugged conditions
• Includes end mount and slider mounting brackets, wiring harness and switch
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com

Carbon Fiber Fork Guards from E Line Accessories protect your easily damaged upper fork tubes from rock chips and dings that occur while trail riding or racing. Let our good looking, lightweight 260mm universal fit dirt bike fork guards take the abuse while they keep your OEM fork in new condition while you focus on riding the track or trail. Length 260mm/10.25"

Email Tristana@browardmotorsports.com

PRO FILTER Premium Air Filter is made of chemical resistant, high quality polyester based foam. Dual-stage design allows for superior filtration by eliminating the passage of fine dust and dirt, while helping to prevent air flow blockage. Special reticulation process offers unsurpassed air- flow and filtration. Industrial strength, resin bonded seams increase the integrity of the air filters wash after wash. Packaged individually in a re-sealable bag.

Email Tristana@browardmotorsports.com

• Bright white LED’s
• Great for motorcycles, trailers, and automotive use

Email Tristana@browardmotorsports.com

The helmet that redefined badass has evolved into the all New Covert X. Same multi-configuration versatility featuring a refined 1/2 helmet profile, injection-molded LG® polycarbonate mask, and lightweight Ultra-TCT® composite shell construction resulting in a truly minimalist, no nonsense package.

• DOT Approved
• Multi-layered Ultra-TCT® shell combines fiberglass, aramid and poly-resin fibers which minimize weight while maximizing strength and impact dispersal
• Advanced multi-layer EPS provides superior energy absorption and channels for increased airflow
• Unique multi-configuration design featuring removable front mask and rear comfort sleeve results in 3 distinct riding configurations: Full Mode, 3/4 Mode and 1/2 Mode
• Subtly integrated forehead vent intakes
• Dark smoke EverClear® anti-fog sun shield installed. Anti-scratch coated and offers 95% UV-A & UV-B protection
• FREE Clear EverClear® anti-fog and anti-scratch coated face shield included
• Removable/washable KwikWick® III anti-microbial interior keeps you cool, dry and comfortable
• Included cold weather ear covers with integrated speaker pockets to accommodate BlueTooth® communication system speakers (when used in 1/2 helmet Mode)
• Block-off plates included for use in 3/4 Mode
• Optional Mask styles available (sold separately)
• 5 Year Warranty

Email Tristana@browardmotorsports.com

• Carbon Fiber Fork Guards from E Line Accessories protect your easily damaged upper fork tubes from rock chips and dings that occur while trail riding or racing.
• Let our good looking, lightweight fork guards take the abuse while they keep your OEM fork in new condition while you focus on riding the track or trail.
• Universal carbon fiber upper fork protection. Fits most makes and models of full size off-road/adventure motorcycles
• Length 260mm/10.2

• The Registration wrap is a universal fit on most forks after 2000
• This is a carbon fiber wrap that can be snapped on any bike without any tools.
• It also can protect registration with the option of positioning on the fork tube.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Whether you have an OEM or aftermarket exhaust system, the head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it from potential impact damage. With temperatures exceeding 900-degrees Fahrenheit on most dirt bikes, your riding gear can be burnt quickly if it contacts an unprotected header, so before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield and say goodbye to those burnt britches and boots. E Line Accessories dirt bike heat shields are designed to attach to the stock header bolt-on tabs so they are easy to install, but they do require a specific mounting kit that includes all the necessary hardware and instructions. Each kit features stainless steel mounting hardware that provides and exact fit that keeps the carbon heat shield the perfect distance away from the head pipe it is protecting. This type of attention to detail is part of what sets our components apart from the crowd.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our dirt bike exhaust pipe guards are manufactured using a hand laid mix of carbon, Kevlar and our unique high-temperature resistant resins. A total of 5 layers to be exact. This combination creates good looking, durable and clean fitting guards that will protect your expansion chamber from power-robbing dents and dings. Compared to other exhaust pipe guards, the E Line Accessories carbon fiber pipe guard is lighter and more durable with a 75-percent greater tensile strength from any of the metal units we have tested. It is “real carbon fiber.” Our carbon/Kevlar components are designed to be installed in a matter of minutes without removing the exhaust. A pair of stainless steel clamps are all that is needed to add durable, lightweight protection to the expansion chamber of your favorite motorcycle. Installation instructions are available on our web site videos.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

• Includes 1 controller & 1 SAR light bars.
• Change light beam direction instantly with 90 degree Search Mode. 
• 6 Search Mode beam widths: 15, 30, 45, 60, 75, 90 degrees with auto memory function.
• Advanced aero dynamic design fox minimum wind noise.  
• Intense Strobe Mode for max attention.
• Solid Mode turns all light solid on with max power
• Traffic Direction Mode: left, right, split from center.
• Patented optic and control technology. IP 67 waterproof.
• 5yr warranty. 

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

• Ultra bright automotive grade LED.
• XKChrome RGB backlight.
• Available in Flood, Spot, Driving, and Fog patterns
• Low profile
• IP67 Waterproof

Email Tristana@browardmotorsports.com

• 300% center spot brightness increase compared to 1st gen.
• Ultra bright automotive grade LED.
• Available in 6in / 10in / 20in. 
• Two mounting bracket sets included: side and back mounting.
• Low profile single row design.
• IP67 Waterproof.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

Our motorcycle skid plates are hand molded to the exact shape of the frame and engine which in turn offers much more protection from the constant pounding that occurs when riding off-road. We incorporate Kevlar into our carbon fiber skid plates because it has proven to be one of the most durable and lightweight materials on the market today. While the carbon fiber looks great, the Kevlar helps set E Line Accessories from the competition. Why carbon fiber? Because an aluminum skid plate cannot be molded perfectly to the shape of the bike. Also, metal is prone to dents and bending which can allow impacts to cause damage along the lower frame tubes. Plastic? Great idea, however plastic will allow frames to be bent on impact as well as never being formed to follow the engine and frame lines to eliminate mud build up. Over the years we have worked diligently to develop the perfect combination of carbon fiber. Kevlar and resin that makes our skid plates the most durable engine protection on the market today. All of the E Line Accessories skid plates require a separate mounting kit which includes all the necessary hardware to quickly and easily install on your favorite motorcycle. E Line Accessories incorporates Kevlar in the manufacturing process because it disperses impact forces and resists fatigue better than any other material used on motorcycle skid plates, including aluminum. If you are looking for the best dirt bike skid plate on the market, check out the E Line Accessories carbon fiber skid plates.

Email Tristana@browardmotorsports.com

3 Button Switch Panel:

• Add-on accessory for 2nd gen Razor Series Auxiliary High Beam Fog+Strobe 20" light bar.
• 3 button rocker switch panel with led indicator
• Wiring harness with built-in fuse. 

Email Tristana@browardmotorsports.com

For ordering a Rale Snow Bike Kit, order 1 Conversion Kit and 1 Fit Kit for the model of bike. Contact your dealer for replacement parts not listed.

Email Tristana@browardmotorsports.com

For ordering a Rale Snow Bike Kit, order 1 Conversion Kit and 1 Fit Kit for the model of bike. Contact your dealer for replacement parts not listed.

Email Tristana@browardmotorsports.com

• Stealth license plate vanity light
• Built-in white LED to illuminate the license plate
• Chrome and high gloss black versions available
• IP 67 waterproof
• 18 white leds. 1.5W max output
• 12v DC input

Email Tristana@browardmotorsports.com

For ordering a Rale Snow Bike Kit, order 1 Conversion Kit and 1 Fit Kit for the model of bike. Contact your dealer for replacement parts not listed.

Email Tristana@browardmotorsports.com

For ordering a Rale Snow Bike Kit, order 1 Conversion Kit and 1 Fit Kit for the model of bike. Contact your dealer for replacement parts not listed.

Email Tristana@browardmotorsports.com

Height = 11.5"

Length = 48"

Width = 24"

Bunk Spacing = 14"

• Lower profile design for attractive showroom PWC displays
• 14" bunk spacing works for deep v-hull watercraft
• Heavy duty powder coated construction

Email Tristana@browardmotorsports.com

For ordering a Rale Snow Bike Kit, order 1 Conversion Kit and 1 Fit Kit for the model of bike. Contact your dealer for replacement parts not listed.

Email Tristana@browardmotorsports.com

• Widest and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Open design to reduce mud packing
• Outstanding build quality
• Made in USA
• Expanded motorcycle fitment range 
• (Optional) Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions
• Lifetime warranty - see our website for details.

Email Tristana@browardmotorsports.com

• Allows hassle free, fast and easy goggle use
• Goggles put on or taken off with one hand
• Fits Scott, Smith, Oakley and most others
• Can be installed in just seconds without tools

*Stick on kit includes buttons for replacement or mounting quickstraps to a different helmet. Remount stickers are stickers only

Email Tristana@browardmotorsports.com

• Charges/maintains 6/12 volt lead acid and 12 volt lithium-ion batteries, 2 amp charging per bank 
• Start voltage sensor detects dead batteries as low as 1 volt
• Force mode allows manual charging of extremely dead batteries (down to 0 volts)
• Built-in battery desulfation mode to recover worn-out batteries 
• Smart indicators quickly detect when the battery charger is connected in reverse polarity, connected to an incompatible battery, or if the battery is failing
• Included per charging bank: Pair of detachable clamps, 10' extension leads

Email Tristana@browardmotorsports.com

• Lifetime Warranty
• Made with Industry leading UltraMax® fabric
• Maximum UV protection against fading
• 2 rows of pockets on Hi-Viz orange liner
• Zippered pocket to hold smaller tools, bolts or screws
• Durable self-fastening strap and carry handle
• Dimensions: 17” L x 16” W (zippered pocket: 12” x 5”)
• Tools not included

Email Tristana@browardmotorsports.com

• 6' x 10mm (0.39") titanium reinforced hardened square link chain mated to an integrated X2P Dual Lock 
• Double rubber cover for better protection against bumps and hits.  110cm x 10mm (3.57' x 0.39")
• 5 laser cut keys (1 micro-light and 4 extra grip keys) Micro-light key projects a bright white beam

Email Tristana@browardmotorsports.com

• Made with Industry leading UltraMax® fabric
• Maximum UV protection against fading
• Large Tool Roll RG-1085 included
• Elastic loops & mesh pockets under lid for maximum storage
• Internal self-fastening straps to hold tool roll and other items
• MOLLE top panel to attach other accessories
• Attaches using tension buckles and straps
• Rigid construction and Hi-Viz orange liner
• Water resistant zippers help keep out dust and dirt
• Dimensions: 20” L x 8” W x 4” H
• Holds 10 Liters
• Tools not included

Email Tristana@browardmotorsports.com

• Off-road glove
• Synthetic suede palm for high levels of durability
• Embossed and padded side reinforcement patch
• TPR protection on fingers
• Griplaser lamination on flap for high levels of grip
• Short stretch cuff
•  2mm padding on fingers for high levels of comfort
•  Extended ergonomic stretch insert on palm
•  Thumb and palm reinforcement patches for durability
•  Rolling palm on index finger
•  Viscoelastic covered knuckle

Email Tristana@browardmotorsports.com

• Pulls hard through the entire powerband, from take off to wide open 
• Big improvement over stock weights and even out-pulls our original Belly Buster weights
• Polaris 9R (P22 Clutch) weights see improved top end, great for trails/ low elevation
• Maintains backshift and crisp throttle response
• Made from billet tool steel, heat treated and plated for extended life
• Uses OEM style fiber bushing for long term wear
• 3 pack

Email Tristana@browardmotorsports.com

• Pulls hard through the entire powerband, from take off to wide open 
• Big improvement over stock weights and even out-pulls our original Belly Buster weights
• Polaris 9R (P22 Clutch) weights see improved top end, great for trails/ low elevation
• Maintains backshift and crisp throttle response
• Made from billet tool steel, heat treated and plated for extended life
• Uses OEM style fiber bushing for long term wear
• 3 pack

Email Tristana@browardmotorsports.com

• X2P Double Bolt Lock for ultimate pull resistance
• Heavy-duty 185cm x 20mm (6’ x 0.79”) extra flexible steel cable
• Rubber and vinyl coatings on lock body and cable protect paint and delicate finishes
• 5 laser cut keys (1 micro-light and 4 extra grip keys) Micro-light key projects a bright white beam

Email Tristana@browardmotorsports.com

• Pulls hard through the entire powerband, from take off to wide open 
• Big improvement over stock weights and even out-pulls our original Belly Buster weights
• Polaris 9R (P22 Clutch) weights see improved top end, great for trails/ low elevation
• Maintains backshift and crisp throttle response
• Made from billet tool steel, heat treated and plated for extended life
• Uses OEM style fiber bushing for long term wear
• 3 pack

Email Tristana@browardmotorsports.com

• Pulls hard through the entire powerband, from take off to wide open 
• Big improvement over stock weights and even out-pulls our original Belly Buster weights
• Polaris 9R (P22 Clutch) weights see improved top end, great for trails/ low elevation
• Maintains backshift and crisp throttle response
• Made from billet tool steel, heat treated and plated for extended life
• Uses OEM style fiber bushing for long term wear
• 3 pack

Email Tristana@browardmotorsports.com

• Pulls hard through the entire powerband, from take off to wide open 
• Big improvement over stock weights and even out-pulls our original Belly Buster weights
• Polaris 9R (P22 Clutch) weights see improved top end, great for trails/ low elevation
• Maintains backshift and crisp throttle response
• Made from billet tool steel, heat treated and plated for extended life
• Uses OEM style fiber bushing for long term wear
• 3 pack

Email Tristana@browardmotorsports.com