• Truly an off road capable phone mount that holds phones of varying sizes secure even in rough terrains.
• Quick release Cam Clasp on the back of the mount snaps the mount open and closed for quick access.
• Squeeze the mount as tight as necessary for your driving style, or keep it loose so you can quickly drop the phone in place.
• Holds phones from 2.6″ to 3.6″ wide with or without a case. Plus size iPhones are no problem
• Soft weather resistant foam and embossed Axia Alloys logo patch keep phones protected and secure.
• Pivoting ball mount allows you to position your phone just where you need it.
• Strong 3M VHB adhesive foam tape attaches securely to any flat surface.

Email Tristana@browardmotorsports.com

• 100% brand-new, not refurbished
• Completely assembled with Cycle Pro® upgrades
• Carburetor comes with assortment of main and pilot jets for full coverage
• Complete instruction sheet included for tuning suggestions
• Access to idle air mixture screw
• Upgraded emulsion tube installed
• Upgraded slide spring for better throttle response
• Accurate reproduction of the OEM Keihin CV 40mm carburetor.

Email Tristana@browardmotorsports.com

The HH-65 Naked is the alter ego to our Full Dressed model without the peak visor. For those riders who want a cleaner modern look but do not want to give up all of the features of the Full Dressed, the naked has you covered.

Email Tristana@browardmotorsports.com

• Direct OEM replacement sensors
• 100% tested for functionality
• Please reference your parts manual for correct OEM number fitment

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

The SCOTT Fury Goggle is guaranteed to shake things up. Shaped by innovation, technology and design, the Fury follows in the steps of our flagship goggle, the Prospect. Featuring our proven SCOTT Lens Lock System, 3-layer face foam, no-slip silicone strap, and supporting all the same accessories as the Prospect, this low-profile, high-performance motocross goggle was fully developed to Defend Your Vision in any and all conditions.

Email Tristana@browardmotorsports.com

• Polisport is proud to present  Durable Gloss Polypropylene (DGP), the first plastic composition for off-road that incorporates maximum gloss and high resistance to breaking
• Injection molded quality for a perfect OEM type fit
• Exact replica of stock OEM plastic
• Inexpensive alternative to OEM replacement parts
• Pre-drilled for perfect mounting every time
• Kits include front and rear fenders, side panels,  radiator shrouds, and # plate in factory OEM colors

Email Tristana@browardmotorsports.com

• Precision machined from high tensile strength steel
• Built-in lock plate which can fit in almost any position
• 820-54722 is 22 holes, 820-54723 is 26 holes
• Mounting hardware included
• Sold Each

Email Tristana@browardmotorsports.com

• Everyone knows the boot contact area is the first place your graphics take a beating (usually the first ride)
• Graphic guard protects the vulnerable front edge of your side panel graphics
• Made of highly resistant crystal clear plastic
• Slim fit to avoid dirt between the guard and plastic parts
• Easy to install only one mount point for a perfect fit

Email Tristana@browardmotorsports.com

• Allows installation of aftermarket CV style air cleaner assemblies.
• Spacer 820-50525 can be used in conjunction with breather/bracket kit 820-50512 to mount aftermarket air cleaners with a CV/Delphi EFI bolt pattern to TBW models.
• Spacer 820-50578 allows use of any 5" round AC outer cover with center bolt & can be used with 820-505074 or 820-50575. As well as 90 degree air cleaners.
• Not legal for use in California on pollution controlled vehicles, check local laws before installation

Email Tristana@browardmotorsports.com

• Polisport is proud to present  Durable Gloss Polypropylene (DGP), the first plastic composition for off-road that incorporates maximum gloss and high resistance to breaking
• Injection molded quality for a perfect OEM type fit
• Exact replica of stock OEM plastic
• Inexpensive alternative to OEM replacement parts
• Pre-drilled for perfect mounting every time
• Kits include front and rear fenders, side panels,  radiator shrouds, and # plate in factory OEM colors

Email Tristana@browardmotorsports.com

• Allows use of any 5.5" round AC outer cover with center bolt
• M8 AC breather kits replace the original factory integrated air cleaner assembly, comes with all parts needed for easy installation (Note: The 5.5" round AC outer cover is not included, sold separately)

Email Tristana@browardmotorsports.com

• Polisport is proud to present  Durable Gloss Polypropylene (DGP), the first plastic composition for off-road that incorporates maximum gloss and high resistance to breaking
• Injection molded quality for a perfect OEM type fit
• Exact replica of stock OEM plastic
• Inexpensive alternative to OEM replacement parts
• Pre-drilled for perfect mounting every time
• Kits include front and rear fenders, side panels,  radiator shrouds, and # plate in factory OEM colors

Email Tristana@browardmotorsports.com

• Seam Grip sealer/adhesive + brush
• 22oz vinyl truckers tarp patches (5 colors)
• 1-in. Nylike® webbing (1 yd.)
• Zinc plated 1-in. cam buckle
• Heavy duty 1-in. nylon tension lock buckle
• Vinyl coated fender hook
• Giant Loop vinyl sticker

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

SHOCK SEAL KITS

All rear shock seal kits are complete assemblies, ready to install into the shock body. no longer is it necessary to replace bushings, seals, o-rings etc. All rear shock seal kits include aluminum body, dust seal, bushing, oil seal, o-ring, internal guide bushing/washer, snap ring and top out bumper.

• All seal heads are made from 6061-t6 aluminum to save weight
• Air bleed hole helps remove air from the oil reservoir during seal head installation
• Oil seal utilizes a double lip design and a low friction elastomer. this gives the seal head additional dirt exclusion and yet maintains a low drag (low friction) seal
• The dust seal utilizes a spring type exclusion seal to maintain constant pressure and assure good dirt and contaminant exclusion over the life of the seal head

SHOCK BUMPERS

• Kit contains direct OEM replacement shock bumper
• Bumpers are made from high quality OEM grade polyurethane closed cell foam
• Designed and tested with racers in mind

SHOCK BLADDERS

• Kit contains direct OEM replacement shock bladder
• Bladder is made from high quality NBR rubber to ensure a leak free pliable wall

Email Tristana@browardmotorsports.com

• Designed to withstand direct temperatures up to 1750° F
• Floor & Tunnel shield II is the ultimate solution to block radiant heat from entering a vehicles interior and protect under hood components
• Constructed from 10mm aluminum bonded to a finely woven layer of high temperature resistant glass fiber.
• Wind & water will not affect adhesive
• Minimum clearance required, only 3/16" thick
• Easily shape, trim, peel & stick
• Aggressive self-adhesive backing

Email Tristana@browardmotorsports.com

• Protects against abrasion, chemicals & the elements
• Superior in style & function to plastic tubing 
• Split design makes install easy
• Rated up to 347º F

Email Tristana@browardmotorsports.com

• Flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000° F of radiant heat
• Made of 1mm aluminized material bonded to a woven glass fiber matting
• Cool Tape is an Ultra light weight solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses

Email Tristana@browardmotorsports.com

• More effective than traditional metal heat shields
• Enhanced protection for legs and boots
• Great custom look
• Stainless Steel hardware
• Standoffs create air gap for maximum heat dissipation

Email Tristana@browardmotorsports.com

• Bonds to itself and forms a waterproof permanent seal
• Ideal for emergency hose repairs, non-slip grip surface for tools, electrical connections and a leak sealer are among its many uses
• Does not leave a sticky residue
• Engineered at 700psi tensile strength with insulating capabilities up to 8000 volts

Email Tristana@browardmotorsports.com

Reduces seat temperatures as well as blocking the heat radiating up through the seat belt holes

Two additional shields included that protect the rear passenger foot well area

Easy installation and can be easily removed for service.

Email Tristana@browardmotorsports.com

RIGID introduces the all-new 360-Series family of LED lights. The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market. Choose between a 4-inch or 6-inch light, preferred backlight color, and beam pattern for a customized experience and look. RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application. Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night. Harness sold separately.

Email Tristana@browardmotorsports.com

The new RIGID SR-L Series Spreader light provides an easy way to add convenient area lighting and style to any vehicle. This spreader provides a broad 120˚ beam pattern to illuminate wide areas around any vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any vehicle. The halo backlighting is available in one of four colors: red, blue, amber, or white. Use the flying leads wiring to wire the SR-L Series Spreader light directly into your vehicle’s electrical system or purchase the RIGID wiring harness separately (652-36360). The SR-L Series Spreader offers the same legendary RIGID build quality as the rest of RIGID’s products, from the high-grade aluminum housing to the impact resistant polycarbonate lens. Packed with power and style, the SR-L Series makes it easier than ever to Own the Night.

Email Tristana@browardmotorsports.com

The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGID’s legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions.

Email Tristana@browardmotorsports.com

The Rekluse slave cylinder was designed to create a mechanical advantage which reduces lever pull by over 30%, widening the friction zone while moving the modulation point closer to the handlebars. The hard anodized billet aluminum construction provides enhanced sealing and maximum durability. Rekluse has years of experience engineering and manufacturing high performance billet slave cylinders for motorcycle applications, making this a proven solution you can trust. The Rekluse slave cylinder is a direct bolt-on OE replacement product.

Email Tristana@browardmotorsports.com

The Rekluse slave cylinder was designed to create a mechanical advantage which reduces lever pull by over 30%, widening the friction zone while moving the modulation point closer to the handlebars. The hard anodized billet aluminum construction provides enhanced sealing and maximum durability. Rekluse has years of experience engineering and manufacturing high performance billet slave cylinders for motorcycle applications, making this a proven solution you can trust. The Rekluse slave cylinder is a direct bolt-on OE replacement product.

Email Tristana@browardmotorsports.com

M8 Oil Pump 

• 126% Feed, 131% Scavenge at 1000rpm
• 123% Feed, 146% Scavenge at 2500rpm * VS. OEM  62400178,62400126

* M8 High pressure oil pump does not come with oil seal, see oil seal part # 68-10305, OEM# 62400205

TC 96" Oil Pump 

• Comes with 4 mounting bolts 
• 123% Feed, 146% Scavenge at 1000rpm
• 140% Feed, 167% Scavenge at 2500rpm * VS. OEM 26037-06

TC 88" Oil Pump 

• Comes with 4 mounting bolts 
• 171% Feed, 191% Scavenge at 1000rpm
• 213% Feed, 236% Scavenge at 2500rpm * VS. OEM 26035-99B

XL Oil Pump

• Comes with mounting 4 bolts, gasket, clamps and fittings. 
• 110% Feed, 115% Scavenge * VS. OEM 26204-91A

All pumps have Die-cast Aluminum bodies with high density sintered Alloy Steel internals.

Intended for use with stock cam plate or oil window shape must be the same as stock.

Email Tristana@browardmotorsports.com

• Use for removal and filling of coolant, oils and many other fluids
• 200 cc (6.75 ounce) capacity
• Semi-translucent cylinder for viewing exact fluid volume and overall fluid condition
• Unique hose coupler offers a positive hose connection
• Body of the cylinder is calibrated with both ounce and cc measurements
• Easily disassembled for cleaning, allowing for the use of a multitude of different fluids
• Includes two 7½" long hoses (one 5/16". and one ¼") with a coupler to join them together

Email Tristana@browardmotorsports.com

• Tough nylon construction, with heavy duty top zipper
• Dimensions: 15" long x 7" wide x 9" tall (w/bag unzipped)
• Wide-mouth opening for easy access to tools
• External pockets for extra storage

Email Tristana@browardmotorsports.com

Protect your bar ends and grips with ODI Billet Aluminum End Plugs. Constructed of sturdy 6061 aluminum, these plugs are designed to take the brunt of whatever you can throw at them

Email Tristana@browardmotorsports.com

• Made of non-marring reinforced nylon composite material for strength and flexibility
• Double-ended with hooks, angles, and straight tips ensuring the right tool for the job
• Remove or replacing O-rings, seals/gaskets, clips
• Cleaning tight gaps in interior components, handling delicate wiring and connectors, etc.
• Composite construction is lightweight, non-conductive, non-corroding and solvent resistant
• Lifetime warranty

Email Tristana@browardmotorsports.com

• Rechargeable with built-in lithium ion batteries
• 30 Individual LED's produce over 1200 lumens of bright white light
• High/low brightness option
• Impact resistant handle with non-slip rubber grip and magnetic bracket
• Powder coated metal lamp shield with swivel hang hook
• Includes 39" USB/Micro USB charging cable
• Optional charging stand/base available separately

Email Tristana@browardmotorsports.com

• Delivers a strong spring-driven strike when pressed against a surface by pushing down on the end of the handle
• A precise dimpled starting point will prevent drills and screws from wandering in metal, wood, or plastic
• Adjust striking force (between 13.5 and 32 pounds) by rotating the top end of the handle
• The oversized rubberized handle is very comfortable to use and provides a sure grip for better accuracy
• S2 steel striking pin and nickel-plated finish for a long service life
• Lifetime warranty

Email Tristana@browardmotorsports.com