• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Rear suspension lowering kit, no need to disassemble shock unit for installation
• Push down seal head and install lowering kit for 30mm lower seat height
• WPS #634-8365 for a 46mm shock body
• WPS #634-8366 for a 50mm shock body

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Gives you longer system life without compromising weight
• Steel teeth last 4 times longer than aluminum
• Pound-for-pound, the strongest sprocket on the market
• The aluminum carrier is 70% lighter than steel
• Forging rivets into the sprockets provides exceptional strength

Stealth sprockets feature an aluminum carrier, available in silver or black, with a black steel tooth ring.

• Center bore is 1.99 on `84-99" and 2.22" on `00-UP

Email Tristana@browardmotorsports.com

• Available in Cast or Moly 
• Three piece oil rings
• Designed to work with OEM and Screaming Eagle piston's 
• Sold in sets, for two pistons (Except for TC 113" and 883 XL)
• Made In The USA!

*NOTE: ALL TC 113" AND 883 XL ARE PER CYLINDER AND YOU MUST ORDER TWO PER BIKE.

Email Tristana@browardmotorsports.com

• Finger nut can replace standard tube nut
• Helpful tool for holding valve stem when changing or inflating  tires

Email Tristana@browardmotorsports.com

• Proprietary rubber blend maximizes grip
• Durable Italian import tank pad
• Hi-Strength adhesive hold up to heat and stays pliable in the cold
• 3D pattern for improved feel

Email Tristana@browardmotorsports.com

• Available in mini or extended versions
• Ergonomic grip for greater comfort and control
• Single edge razor blades fit most all standard razor scrapers
• Lifetime warranty (not on blades)

Email Tristana@browardmotorsports.com

• Proprietary rubber blend maximizes grip
• Durable Italian import tank pad
• Hi-Strength adhesive hold up to heat and stays pliable in the cold
• 3D pattern for improved feel

Email Tristana@browardmotorsports.com

• Proprietary rubber blend maximizes grip
• Durable Italian import tank pad
• Hi-Strength adhesive hold up to heat and stays pliable in the cold
• 3D pattern for improved feel

Email Tristana@browardmotorsports.com

• Proprietary rubber blend maximizes grip
• Durable Italian import tank pad
• Hi-Strength adhesive hold up to heat and stays pliable in the cold
• 3D pattern for improved feel

Email Tristana@browardmotorsports.com

White Chevy Silverado 4x4 with Yamaha Dirt Bike (1:43 Scale)

Email Tristana@browardmotorsports.com

A Safe and Effective Mobile Solution!

Email Tristana@browardmotorsports.com

• Compression sleeves enhance comfort and support while reducing possible abrasion
• Flat lock stitching for extra comfort
• Anti-slip silicone grippers under the top and bottom band aid in gripping the frame of the brace and keeping the sleeve in place
• Moisture wicking fabric
• Extra long sleeves that fold over the brace to prevent slipping and cover top and bottom Velcro straps to avoid catching on pant liners

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• ALL Rear Shields are made from 1/8” General Purpose Polycarbonate
• Vented and Tinted versions available for some models.
• Manufactured by CNC process
• Trailerable-Must use front windshield

* vented

@ TRR model (Toolless Rapid Release design)

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

• Replacement foot peg spring and pin set.
• Durable Stainless steel spring pin will not rust like OEM steel pins
• Spring is made of durable steel with zinc finish.
• Comes with washers and cotter pins, ready to install with your new foot peg.

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

SportFlex™ Series

• Innovative new fabrication for mid-weight protection
• Heavier then original Motley Tube® but lighter then fleece lined ones
• Soft comfortable material
• Machine washable
• 50+ UV protection

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

• Air bleed cup for KYB, SHOWA and WP rear suspensions.
• Make your rear suspension air bleeding easy.
• Titanium anodized with DRC laser printed logo on cup body.
• Can be used with suspension comes with bleeding bolt hole.

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

Petcock Repair Kits

• Kit includes: Diaphragm (if needed), face gasket, o-rings, wave washers, face screws and tank bolts
• Kits for specific Honda models with riveted petcocks also include a special drill bit and self tapping screws
• Order 1 kit per petcock

Petcock Diaphragm Repair Kits

• Kit includes: Diaphragm, and necessary springs and hardware 

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.

Air Cut Off Valve Kits

• Kit Includes all necessary parts to rebuild the air cut off valve circuit.
• Models with multiple carburetors include components to repair all carburetors.
• Kit includes necessary o-rings, diaphragm, spring, screws.
• Improperly functioning air cut off valves can stick open or closed causing popping on deceleration or poor running conditions.

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications if applicable (unless noted by "*").

Email Tristana@browardmotorsports.com

Carburetor Kits

• Kits include all the necessary components to repair a carburetor
• Models with multiple carburetors include components to repair all carburetors
• Kit includes all necessary o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit)
• OEM jet sizes and slide needles are included in the kit
• KTM Kits do not include jets or slide needle as standard jetting sizes are not provided by KTM
• NBR rubber material is used on all O-rings and rubber gaskets for the excellent resistance to the ethanol fuels
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material
• Components included in the kits are based off US models and discretion must be used when attempting to install the kit on a non-US model

Order 1 kit per motorcycle, kits include all needed individual parts for multiple carb applications.