• LED turn signal and license plate bulbs for Honda GL1800/F6B
• Turn signal bulbs are sold in pairs, replaces bulb type 7443 (LED flasher assembly may be required to prevent fast blinking issues)
• License plate bulb replaces bulb type 194/T10
• Not D.O.T. approved, intended for non-roadway use only

Email Tristana@browardmotorsports.com

• Forbidden Motorcycles risers feature a 1-1/8" clamping area for MX style bars.
• Available in 2", 9" and 11" heights in Raw or Black Anodized finishes.
• The top clamp is a one piece construction for extreme stability and durability.
• The FM logo is machined into the T 6061 aluminum.
• Risers are pre-drilled for internal wiring for a super clean assembly.
• FM moto bars by Fly Racing have 1" ends for HD controls with pre-drilled holes for internal wiring that match up and bolt directly onto these risers!

Email Tristana@browardmotorsports.com

• LED turn signal and license plate bulbs for Honda GL1800/F6B
• Turn signal bulbs are sold in pairs, replaces bulb type 7443 (LED flasher assembly may be required to prevent fast blinking issues)
• License plate bulb replaces bulb type 194/T10
• Not D.O.T. approved, intended for non-roadway use only

Email Tristana@browardmotorsports.com

• LED turn signal and license plate bulbs for Honda GL1800/F6B
• Turn signal bulbs are sold in pairs, replaces bulb type 7443 (LED flasher assembly may be required to prevent fast blinking issues)
• License plate bulb replaces bulb type 194/T10
• Not D.O.T. approved, intended for non-roadway use only

Email Tristana@browardmotorsports.com

• Dynamic sequential LED front turn signal assemblies
• Daytime running light for increased visibility
• D.O.T. approved, available with clear or smoke lens 
• Note:  Plug and play for `06-17 GL1800, wire adapter plugs required for F6B/`01-05 GL1800
• Note:  LED flasher assembly may be required to prevent fast blinking issues

Email Tristana@browardmotorsports.com

• Philips 6000 Kelvin LED H7 bulbs
• Can be used for both high and low beam fitment
• Sold in pairs, order 2 kits to replace all headlight bulbs
• Not D.O.T. approved, intended for non-roadway use only

Email Tristana@browardmotorsports.com

• Turn signal lens kit, available with clear or smoke lens
• Includes white/amber Switchback LED bulbs which converts the turn signals into daytime running lights
• LED flasher included in kit
• Not D.O.T. approved, intended for non-roadway use only

Email Tristana@browardmotorsports.com

Featuring a single Youth shell size, the MX-46Y can be custom fitted from Youth Small up to Youth Large with just padding kit changes (sold separately). This way the helmet can grow as they do. 19 Vents create maximum airflow, keeping you cool and comfortable lap after lap.

• DOT Approved
• One shell can be adjusted to three different sizes so the helmet can grow as your child grows
• Maximum air flow is achieved through industry leading 19 vents
• Removable, adjustable, washable interior allows for easy cleaning and custom fitting
• High flow, removable mouth vent with washable filter
• Vented roost deflector
• Fully adjustable, flexible and vented visor designed for maximum vision and protection
• Lightweight Shell. Youth only 2.2 lb.
• Optional cold weather breath guard is available P/N - 72-3407

Email Tristana@browardmotorsports.com

• Dynamic sequential LED front turn signal assemblies
• Daytime running light for increased visibility
• D.O.T. approved, available with clear or smoke lens 
• Note:  Plug and play for `06-17 GL1800, wire adapter plugs required for F6B/`01-05 GL1800
• Note:  LED flasher assembly may be required to prevent fast blinking issues

Email Tristana@browardmotorsports.com

• Perfect for Sportsters or Dynas or choppers with narrow glide front ends
• Available in three heights in either Chrome or Satin Black finish
• Wrist angle is perfect for that chopper style riding position
• Dimpled and drilled
• Non throttle by wire

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

• Works on grommets found in most Mikuni® Super BN carburetors and fuel pumps

Email Tristana@browardmotorsports.com

Featuring a single Youth shell size, the MX-46Y can be custom fitted from Youth Small up to Youth Large with just padding kit changes (sold separately). This way the helmet can grow as they do. 19 Vents create maximum airflow, keeping you cool and comfortable lap after lap.

• DOT Approved
• One shell can be adjusted to three different sizes so the helmet can grow as your child grows
• Maximum air flow is achieved through industry leading 19 vents
• Removable, adjustable, washable interior allows for easy cleaning and custom fitting
• High flow, removable mouth vent with washable filter
• Vented roost deflector
• Fully adjustable, flexible and vented visor designed for maximum vision and protection
• Lightweight Shell. Youth only 2.2 lb.
• Optional cold weather breath guard is available P/N - 72-3407

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

Ball type air chuck fits standard bore valves. Has 1/4’’ NPT female thread. Male adapter sold separately below.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

A2500-R2

This 2500lb ATV Series winch features Water Resistant seals to
keep the elements out, a standard 4-hole mounting design and a
heavy duty all metal turn clutch.

• Rated Line Pull: 2500 lbs.
• Control: Deluxe Handlebar-Mounted Mini-Rocker Control Switch
• Gear/Transmission: All-metal Planetary Gear Drive
• Brake: Dynamic and Mechanical
• Clutch (free spooling): All Metal Cam Activated Freespool
• Drum Size: 1.5" (D) x 3.15" (L)
• Mount Plate: Fairlead Mount Only (A Model Specific Mount is necessary for your make and model ATV)
• Recommended Battery : 12 Amp/hour minimum
• Warranty: Limited 1 Year
• Motor: 12V DC, 1.2 hp permanent magnet.
• Gear Ratio: 171:1.
• Cable: 3/16” D x 45.9’ L.
• Winch Dimensions: 12.67” L x 4.06” D x 4.29” H.
• Mounting Bolt Pattern: 3.00” x 4.875” (4-Hole).
• Winch Weight: 25.7 lbs.

A3000

This 3000lb ATV Series winch features Water Resistant seals to
keep the elements out, a standard 4-hole mounting design and a
heavy duty all metal turn clutch.
• Rated Line Pull: 3000 lbs.
• Motor: 12V DC, 1.3 hp permanent magnet.
• Gear Ratio: 171:1.
• Cable: 3/16” D x 45.9’ L.
• Winch Dimensions: 12.67” L x 4.06” D x 4.2” H.
• Mounting Bolt Pattern: 3.00” x 4.875” (4-Hole).
• Winch Weight: 24.8 lbs.
• Hand-held remote included.

R2-45

Rated Line Pull: 4500 lbs.
Motor: 12V DC, 1.7 hp Permanent Magnet
Gear Ratio: 166:1
Gear/Transmission: All-metal Planetary Gear Drive
Brake: Dynamic and Mechanical
Clutch (free spooling): All Metal Cam Activated Freespool
Drum Size: 2" (D) x 3.19" (L)
Cable: 15/64" (D) x 38' (L)
Fairlead: Multi-directional Roller
Control: Deluxe Handlebar Mounted Mini-Rocker Control Switch with
               optional dash mount bracket and a Heavy Duty Corded Remote Switch
Winch Dimensions: 14.6" L x 4.55" D x 5" H
Mount Plate: Fairlead Mount Only (A Model Specific Mount is necessary for your make and model UTV)
Mounting Bolt Pattern: 3.00" x 4.875" (4-Hole)
Recommended Battery : 12 Amp/hour minimum
Warranty: Limited 1 Year
Standard Winch Weight: 36.6 lbs. 

Wide Winch Weight: 39 lbs. 

• For Warranty issues or concerns please contact KFI Direct at (877) 346-2050
   

Email Tristana@browardmotorsports.com

Just like your hands, your feet are one of the most important aspects of riding a motorcycle. When you think about how often you shift gears and work the rear brake pedal you begin to realize the importance of good riding boots. FLY riding boots combine protection, durability, and value to keep you grabbing gears for years to come.

Email Tristana@browardmotorsports.com

• Pack includes 12 interlocking 12" x 12" mats with borders, covers 12 square feet
• Durable, lightweight and water resistant 12mm thick EVA foam
• Connect multiple packs for extended floor coverage

Email Tristana@browardmotorsports.com

• Triple chrome plated
• 1 1/4" outside diameter
• Flip down footpegs
• Comes with all necessary hardware and instructions
• Made in the USA

Email Tristana@browardmotorsports.com

• Triple chrome plated
• 1 ½ outside diameter (Except 2018-Up Softail, they are 1")
• Easily installed with simple hand tools
• Comes with all necessary hardware and instructions
• Made in the USA

Email Tristana@browardmotorsports.com

• Triple chrome plated
• 1 1/4" outside diameter
• Flip down footpegs
• Comes with all necessary hardware and instructions
• Made in the USA

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Triple chrome plated
• 1 1/4" outside diameter
• Flip down footpegs
• Comes with all necessary hardware and instructions
• Made in the USA

Email Tristana@browardmotorsports.com

• Perfect for the traditionalist who want simplicity and clean lines
• 1 1/4" outside diameter
• Triple chrome plated or in a black powdercoat finish
• Made in the USA

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Chrome Plated Fork Tube Plug, Bolt And Washers

Email Tristana@browardmotorsports.com

• Chrome plated mounting hardware
• Give your bike that custom look
• Made in the USA

Email Tristana@browardmotorsports.com

• Made In The U.S.A
• Sold Each
• OEM Reproduction

Email Tristana@browardmotorsports.com

Cadmium Plated

Reproduction of OEM

Email Tristana@browardmotorsports.com

Sold In Packs Of 4

Made In The U.S.A

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Chrome plated mounting hardware
• Made in the U.S.A

Email Tristana@browardmotorsports.com

• Chrome plated mounting hardware
• Made in the U.S.A

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Caliper mounting allen bolts and washers
• Chrome plated and Polished
• Made in the USA

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

IGNITOR OPEN FACE BALACLAVA

 Breathable open faced design

 CoolMax upper keeps you warm and dry

 Windproof Lower construction

 Fits comfortably under most helmets

 Extended shoulder panels for maximum coverage

 Reflective logos for visibility and safety

Email Tristana@browardmotorsports.com

IGNITOR OPEN FACE BALACLAVA

 Breathable open faced design

 CoolMax upper keeps you warm and dry

 Windproof Lower construction

 Fits comfortably under most helmets

 Extended shoulder panels for maximum coverage

 Reflective logos for visibility and safety

Email Tristana@browardmotorsports.com

• Detects internal engine cooling system leaks
• Quickly reveals external cooling system leaks
• Kit includes hand pump with pressure gauge and 12 adapters to fit most power sport/automotive applications and storage case

Email Tristana@browardmotorsports.com

• 200g of 3M Thinsulate™ thermal insulation
• Moisture wicking removable inner liner
• Genuine leather upper for improved strength, durability,  and wear protection
• Reflective panels and logos for increased visibility and safety
• Rubber sole for exceptional traction
• Oversized padded boot laces for easy tightening
• Triple stitched for extra durability
• Padded boot insole for extra comfort
• Smooth finished lace loops for extra seat protection

Email Tristana@browardmotorsports.com

• Includes handle, reversible shank and 2 double sided bits
• Chrome vanadium steel bits
• Shank openings serve as ¼" or 6 mm and 5/16" or 8 mm nut driver
• Bit sizes: Slotted - 3/16" and 1/4", Phillips - #1 and #2
• Handle and shank feature ball spring retention for a positive fit
• Lifetime warranty

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Direct replacements for original clutch washers that are prone to failure
• Precision machined from tool grade steel to increase durability
• Will not break up and damage engine at end of service life
• Great substitution when rebuilding superchargers using OEM rebuild kit

* NOTE: Designed to be used with OEM supercharger shaft found on `04-05 215 models.  If supercharger was rebuilt using OEM# 420-881-102, use washer kit WPS# 59-2252

† NOTE: Must be used with 2006 style supercharger shaft # 420-881-946.  Designed to be used with the OEM supercharger shaft found on `06-07 185/ 215 models.  If supercharger was rebuilt using OEM# 420-881-102, use washer kit WPS# 59-2252

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Removes restrictive speed control function
• Delivers 3-4 mph to stock craft through OEM ECU
• Allows further top speed gains through aftermarket modifications
• Does not affect speedometer accuracy, Eco Mode, or Cruise Control functionality
• All original dash functions are retained
• Easy plug-in installation

Email Tristana@browardmotorsports.com

• Repairs leather and vinyl upholstery, dashboards, vinyl tops, marine upholstery, and luggage
• Includes everything needed for repairs, electric heat iron, color compounds, plastic dashboard hardening powder, and more
• Works great for PWC, marine, ATV/ UTV, and motorcycle

Email Tristana@browardmotorsports.com

• Produces more horsepower through increased air flow
• Precision tapered billet sleeve directly replaces restrictive mesh element in intake tract
• Provides improved low end punch and mid range pull
• Easy installation
• Riva testing has determined the stock ECU will compensate for increased air flow
• REQUIRES aftermarket power filter kit to meet U.S. Coast Guard certified flame arrestor requirements

NOTE: These items are designed exclusively for closed course competition use ONLY.  Use on public lands/ waterways in the state of California is illegal.

Email Tristana@browardmotorsports.com

• Enables Yamaha 1.8 Liter naturally aspirated engine to produce more horsepower by delivering increased air flow
• Precision tapered billet sleeve directly replaces restrictive mesh element in intake manifold
• Provides low end punch and mid range pull
• Quick and easy installation
• Riva testing has determined the stock ECU will compensate for increased air flow
• REQUIRES Coast Guard approved aftermarket filter kit to meet flame arrestor requirements

NOTE: These items are designed exclusively for closed course competition use ONLY.  Use on public lands/ waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

• Produces more power through increased boost pressure (+1lb)
• Supplied hole cutting tool allows easy removal of restrictive screen element from inside of intake manifold
• Special o-ringed billet block-off plug with integrated fitting for aftermarket boost pressure gauge fills opening left after removal of screen element
• Riva testing has determined stock ECU will compensate for increased boost

NOTE: These items are designed exclusively for closed course competition ONLY.  Use on public lands and/or waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

• Facilitates loosening and tightening of hard to reach rear axle nut on H-D® baggers
• Fits 36 mm axle nuts
• Captive swivel extension with ½ inch drive
• Rated for up to 175 foot pounds of torque
• Durable plastic sleeve protects exhaust system
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• Eliminates stock steel rock guard plates for less weight
• Tapered lug holes
• Incorporates built in rock guards
• Pre-installed valve stems

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Building performance exhaust systems for the factory race efforts improves our research and development, which improves the overall performance of our products. Adapting technology we learn on the track to our consumer products is what makes the Yoshimura name synonymous with quality and performance. One look at our RS-9 and RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com