• If handlebars on models listed (Or not listed) are notched and/or cut and not fully round, these adapters MUST be used
• Required for proper installation / function of ODI Lock-On Grips on pwc models with notched handlebars
• Failure to use adapters for models listed below may result in injury due to grip failure

Email Tristana@browardmotorsports.com

This DOT-legal knobby fulfills the needs of dual sport riders who tackle serious off-road terrain.

Email Tristana@browardmotorsports.com

• If handlebars on models listed (Or not listed) are notched and/or cut and not fully round, these adapters MUST be used
• Required for proper installation / function of ODI Lock-On Grips on pwc models with notched handlebars
• Failure to use adapters for models listed below may result in injury due to grip failure

Email Tristana@browardmotorsports.com

M3.0

• Long-life coolant protects down to -36F
• Compatible with all standard seals and hoses
• Free of silicates, nitrates, amines and phosphates (OAT technology) based on ethylene glycol
• KTM Applications; 2015+ Street Models & 2016+ Off-Road Models

M5.0

• Protects down to -36⁰ F 
• Free of nitrites, phosphates and amines, based on ethylene glycol
• Mixing with other coolants is not recommended
• Recommended for use in KTMs; 2014 and prior Street Models, 2015 and prior Off-Road Models

Email Tristana@browardmotorsports.com

M3.0

• Long-life coolant protects down to -36F
• Compatible with all standard seals and hoses
• Free of silicates, nitrates, amines and phosphates (OAT technology) based on ethylene glycol
• KTM Applications; 2015+ Street Models & 2016+ Off-Road Models

M5.0

• Protects down to -36⁰ F 
• Free of nitrites, phosphates and amines, based on ethylene glycol
• Mixing with other coolants is not recommended
• Recommended for use in KTMs; 2014 and prior Street Models, 2015 and prior Off-Road Models

Email Tristana@browardmotorsports.com

• Automatic Transmission Fluid
• Excellent hot and cold condition performance
• Smooth clutch engagement
• DEXRON lll recommended for KTM 50cc automatic transmissions

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

•   GEAR OIL
• Synthetic Performance developed for separately lubricated gearboxes
• Makes for a clean separation of clutch discs
• High levels of wear protection
• Smooth gear selection
• SAE 10W/30 (SAE 80W/85) API GL-4
•     GEAR OIL HYPOID
• Peak-pressure transmission oil for hypoid gear and universal joint lubrication
• SAE 80W/90 API GL-5
•     SCOOTER ZX
• Semi synthetic scooter gear oil
• Developed especially for a variable transmission drive in scooters
• SAE 80W/90 API GL 4+5

Email Tristana@browardmotorsports.com

• Modern semi synthetic 2-stroke engine oil
• Universal performance and wear protection
• Very Low smoke
• Low combustion residue
• Premix and Injector/Autolube system compatible
• Catalytic converter tested
• JASO FD, API TC, ISO-L-EGD

Email Tristana@browardmotorsports.com

• Fully synthetic 2-stroke scooter engine oil
• Meets the demands for frequent cold starts and high operating temperatures
• Extremely clean combustion / Anti-smoke formula
• Premix and Injector/Autolube system compatible
• Works in unique Piaggio injection system (Vespa, Aprilia, Puegeot)
• Catalytic converter tested
• JASO FD, API TC, ISO-L-EGD

Email Tristana@browardmotorsports.com

• Fully synthetic high-performance 2-stroke road racing oil
• Optimum road application and wear protection
• Extremely clean combustion / Low-smoke formula
• Premix and Injector/Autolube system compatible
• Catalytic converter tested
• JASO FD, API TC, ISO-L-EGD

Email Tristana@browardmotorsports.com

• Wire harness pigtail designed to work with the 2018 Polaris Ranger 1000 XP power pulse buss bar
• 12" Pigtail Wire Length
• 14 Gauge High Quality Cross-Link Wire
• Provides quick, easy accessory power
• Plugs into Polaris Pulse Electrical System

Email Tristana@browardmotorsports.com

Header 16" x 48"

Wrap 4' x 8'

Ask Sales Rep about Display kit programs

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Never let go of your bars again when your vision is blocked by roost, mud or water. Simply press the handlebar mounted wireless remote button and The Ripper will quickly and easily advance the film in most goggle roll off systems. The Ripper allows any rider to clear their vision while maintaining “race pace” in the woods, motocross, or supercross track. No more waiting for a safe place or a jump to clear your vision!

Email Tristana@browardmotorsports.com

These two kits allow the addition of 6”x 9” rear speakers to easily be installed into your existing factory bag lids. The included cut out template makes the cutting painless and installation a breeze. This rear speaker upgrade is designed to work perfectly with our BHD3F front kit, simply plug in to the amplifier and give yourself a complete audio upgrade without the hassle of serious modifications or paint.

Email Tristana@browardmotorsports.com

The BHD3F is the first of its kind to fit 1998 to present Harley Davidson Road Glide and Street Glide models all in one package. This simple to install Plug-n-Play solution is all inclusive package that features a compact high power four-channel Class D amplifier, a pair of 6.5” 2-way weatherproof speakers as well as all of the mounts, hardware and connections to make the installation seamless.

Email Tristana@browardmotorsports.com

The .38 helmet from Highway 21 is the perfect no nonsense, three quarter helmet for your ride. DOT approved and crafted from lightweight fiberglass, the .38 features a removable quilted comfort liner, a 3 snap configuration for visor or shields, and a padded strap and D ring chin attachment. Classic style and good looks are the hallmark of the .38 helmet from Highway 21.

Email Tristana@browardmotorsports.com

If it ain’t broke, then don’t fix it. The .357 by HIGHWAY 21 embodies simple style and function of the classic half helmet by focusing on strong durable materials mixed with a little HIGHWAY 21 flavor. A timeless design to serve day in and day out that will not spoil your seat time. Buy it, throw it on, log miles.

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

n/a

Email Tristana@browardmotorsports.com

Replacement Yoshimura parts and packing keep your Yoshimura exhaust performing at its peak performance.

Email Tristana@browardmotorsports.com

TBD

Email Tristana@browardmotorsports.com

• Specially engineered with new 3D Response Technology
• A unique molecular structure that facilitates innovative damping behaviors
• Withstands higher thermal loads without breakdown
• Works in perfect harmony with all valving

Email Tristana@browardmotorsports.com

TBD

Email Tristana@browardmotorsports.com

RiggPaks Solo Tourer

• Attaches using our unique “Full-Nelson” mounting system
• Can be mounted to sit on a luggage rack or passenger seat
• Fully lined interior with rigid construction to hold bags shape when empty
• External buckles for attaching optional CTB-250 roll bag
• Main compartment is fully expandable
• Reinforced floor to help prevent sagging over luggage rack
• Detachable straps convert bag into a backpack
• Security loops under bag allow a cable lock to be installed (cable not included)
• 2 large easily accessible side pockets
• Heavy-duty zippers with pull fobs for use with or without gloves
• Highly reflective webbing helps enhance safety for night riding

Email Tristana@browardmotorsports.com

RS12

After over three years in development and testing we are pleased to announce the RS-12 is here! With the help of incredibly talented factory sponsored athletes, technicians, devoted engineers and a will to raise the bar, our RS-12 has now arrived.

We considered all the details when it came to the RS-12. One look and you can see it's like nothing else on the market. As you get closer you will notice the details in every place on our new dirt bike system, from the matte carbon fiber end cap with decal inlays to the precise machined joints, this system is next level.

• Aggressive, asymmetrical shaped RS-12 profile maximizes muffler volume, manages sound, adds power and provides more clearance for tire and brake caliper.
• RS-12 systems utilize precision machined joints.
• Works-look matte carbon fiber end cap with intricate details.
• New carbon fiber cap eases servicing as compared to other sandwich mounting designs most commonly found in the industry.
• New patent pending Precision Taper Fit (PTF) insert ring
• Tapered muffler body inlet design.

Building performance exhaust systems for the factory race efforts improves our research and development, which improves the overall performance of our products. Adapting technology we learn on the track to our consumer products is what makes the Yoshimura name synonymous with quality and performance. One look at our RS-9 and RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

RS9 Dual Tapered

• Dyno and track tested by Honda R&D in Japan, American Honda MX Team, and HRC All Japan MX Racing Team
• 3-stage header provides broader overall range of power and throttle response.
• New tail pipe divider creates smoother exhaust flow and better velocity to the right and left tail pipe
• New compact forward positioned RS-9T dual muffler design provides lower center of gravity for better mass centralization
• Larger RS-9T core creates improved throttle response, and power in mid and top end

New RS-9T

• Enduro series mufflers have more volume than stock to provide a decrease in overall dB noise level
• Includes installed spark arrestor that means it's 100% ready to go on trails in all 50 states 

RS9 Dual/RS

• Parallelogram-shape muffler
• Maximized internal volume
• Straight, single core baffle
• Tunable insert system
• Spark Arrestor/Sound Insert Compatible

RS4

• Pentagonal-shaped muffler
• Maximized internal volume
• Polyresonant duplex front chamber
• Stepped, two-stage core baffle
• Spark Arrestor/Sound Insert Compatible

RS2

• Diamond-shape muffler
• Maximized internal volume
• Straight, single core baffle
• Spark Arrestor / Sound Insert Compatible

RS2 Enduro Series

• Enduro series mufflers have more volume than stock to provide a decrease in overall dB noise level
• Includes installed spark arrestor that means it's 100% ready to go on trails in all 50 states 

Email Tristana@browardmotorsports.com

• Industry leading UltraMax® fabric with maximum UV protection
• Roll top closure ensures bottle stays secure
• Integrated straps weave into MOLLE systems as found on trails end tail bags
• Included 4 webbing straps and buckles can mount to most racks
• Able to hold up to 30 oz bottles
• 12”H rolled with 30 oz bottle 3.75” diameter
• Lifetime warranty

Email Tristana@browardmotorsports.com

• Industry leading UltraMax® fabric with maximum UV protection
• Heavy duty webbing and buckles for easy and secure mounting
• Larger size is perfect for most adventure motorcycles
• Can mount to most racks or seats
• Fully expandable with reflective piping
• Bag holds its shape even when empty
• Water resistant lockable zippers help keep out dust and dirt
• Inner self-fastening straps to better secure contents
• MOLLE panel on lid allows other items to be strapped down
• Rubberized carry handle for easy transport
• Main compartment measures:
  • 14”L x 11”W x 7”H standard 17.6L
  • 14”L x 11”W x 11”H expanded 27.7L
• Lifetime warranty

Email Tristana@browardmotorsports.com

Universal Dirt Bike / Snow bike Light Kit

• This light bar kit will work with all bikes that have a battery and mount to all dirt bike handlebar clamps

Kit includes the following: 

• (1) 4" LED flood light bar. 2 year warranty, IP69K 2200 lumens. 1.1 amp draw
• (1) Custom Diamond LED stainless steel light bar bracket.
• (1) Custom built wiring harness with PVC cover, relay, switch connections for your battery. 

Snowmobile Light Kit 

LED light bar's kit comes with the following: 

• (1) 4" LED flood light bar. 2 year warranty, IP69K 2700 lumens. 1.1 amps. 
• (1) Custom Diamond LED stainless steel bracket
• (1) Custom built wiring harness with Arma-guard wire loom. 
• Stainless steel hardware. Will not rust. 

Email Tristana@browardmotorsports.com

• Industry leading UltraMax® fabric with maximum UV protection
• Heavy duty webbing and buckles for easy and secure mounting
• Smaller size is perfect for most dual sport and Enduro motorcycles
• Can mount to most racks or seats
• Fully expandable with reflective piping
• Bag holds its shape even when empty
• Water resistant lockable zippers help keep out dust and dirt
• Inner self-fastening straps to better secure contents
• MOLLE panel on lid allows other items to be strapped down
• Rubberized carry handle for easy transport
• Main compartment measures:
  • 10.5”L x 8.5”W x 4.5”H standard 6.5L
  • 10.5”L x 8.5”W x 7.5”H expanded 11L
• Lifetime Warranty

Email Tristana@browardmotorsports.com

Elite Perch Thumbwheel Assembly

• “Factory”On-the-fly adjuster with machined grooves
• Two ball/spring detent system
• Hard anodized adjuster stud
• CNC’D Aerospace grade 6061 T-6  billet construction
• Available in Blue, Red or Black anodized finish
• Made in the USA

Email Tristana@browardmotorsports.com

With ergonomically profiled Nucleon Flex Technology protection held securely in position via an elasticated top strap and silicon hems, the Bionic Flex Knee Protector incorporates comfort padding with a soft-touch stretch mesh which prevents heat build-up. The asymmetric and lightweight design ensures this knee protector provides optimal levels of comfort and freedom of movement

Email Tristana@browardmotorsports.com

With ergonomically profiled Nucleon Flex Technology protection held securely in position via an elasticated top strap and silicon hems, the Bionic Flex Elbow Protector incorporates comfort padding with a soft-touch stretch mesh which prevents heat build-up. The asymmetric and lightweight design ensures this elbow protector provides optimal levels of comfort and freedom of movement.

Email Tristana@browardmotorsports.com

Core Manual TORQDRIVE

The best manual clutch available, period. Core Manual TorqDrive delivers unprecedented performance, tuning and durability. TorqDrive provides more disks in less space, allowing us to add up to 4 additional frictions disks over stock.  More frictions = more torque capacity thus unlocking the full power of your engine without the need to add stiffer pressure plate springs.  Proven in racing at the highest levels, it’s not just good, it’s rEvolutionary.

• Championship proven results 16 AMA MX/SX championships and counting.......
• Improves power delivery and drive
• Virtually eliminates clutch fade
• Provides more consistent clutch lever feel and behavior
• Can be setup to maintain a stock, or lighter than stock, lever pull depending on engine tuning
• Rekluse sleeves eliminate basket wear and notching
  • Note: basket sleeves not applicable to KTM/Husqvarna models

Email Tristana@browardmotorsports.com

An ultra-lightweight protective system offering excellent upper body protection against impacts, this protector features an all-new chest protector complete with Cell Technology for ultra-light weight and optimum ventilation. The back protector is also new and boasts a softer formulation for an enhanced adaptive fit. Both the front and rear hard shell plates are backed with a bio-foam padding for a secure and comfortable snug fit. Quick and extremely easy to put on, it provides extended padding to protect against tire roost without obstructing arm movement.

Email Tristana@browardmotorsports.com

Core Manual TORQDRIVE

The best manual clutch available, period. Core Manual TorqDrive delivers unprecedented performance, tuning and durability. TorqDrive provides more disks in less space, allowing us to add up to 4 additional frictions disks over stock.  More frictions = more torque capacity thus unlocking the full power of your engine without the need to add stiffer pressure plate springs.  Proven in racing at the highest levels, it’s not just good, it’s rEvolutionary.

• Championship proven results 16 AMA MX/SX championships and counting.......
• Improves power delivery and drive
• Virtually eliminates clutch fade
• Provides more consistent clutch lever feel and behavior
• Can be setup to maintain a stock, or lighter than stock, lever pull depending on engine tuning
• Rekluse sleeves eliminate basket wear and notching
  • Note: basket sleeves not applicable to KTM/Husqvarna models

Email Tristana@browardmotorsports.com

Core Manual TORQDRIVE

The best manual clutch available, period. Core Manual TorqDrive delivers unprecedented performance, tuning and durability. TorqDrive provides more disks in less space, allowing us to add up to 4 additional frictions disks over stock.  More frictions = more torque capacity thus unlocking the full power of your engine without the need to add stiffer pressure plate springs.  Proven in racing at the highest levels, it’s not just good, it’s rEvolutionary.

• Championship proven results 16 AMA MX/SX championships and counting.......
• Improves power delivery and drive
• Virtually eliminates clutch fade
• Provides more consistent clutch lever feel and behavior
• Can be setup to maintain a stock, or lighter than stock, lever pull depending on engine tuning
• Rekluse sleeves eliminate basket wear and notching
  • Note: basket sleeves not applicable to KTM/Husqvarna models

Email Tristana@browardmotorsports.com

Core Manual TORQDRIVE

The best manual clutch available, period. Core Manual TorqDrive delivers unprecedented performance, tuning and durability. TorqDrive provides more disks in less space, allowing us to add up to 4 additional frictions disks over stock.  More frictions = more torque capacity thus unlocking the full power of your engine without the need to add stiffer pressure plate springs.  Proven in racing at the highest levels, it’s not just good, it’s rEvolutionary.

• Championship proven results 16 AMA MX/SX championships and counting.......
• Improves power delivery and drive
• Virtually eliminates clutch fade
• Provides more consistent clutch lever feel and behavior
• Can be setup to maintain a stock, or lighter than stock, lever pull depending on engine tuning
• Rekluse sleeves eliminate basket wear and notching
  • Note: basket sleeves not applicable to KTM/Husqvarna models

Email Tristana@browardmotorsports.com

EZ3/EZ5 Utility Jug 

• Ideal for all utility jug needs
• 3gal (10lt) capacity / 5gal (18.92lt) capacity
• Perfect size and design
• Increases control and accuracy
• Rear mounted side breather for reduced spillage
• Made from thick walled high-density polyethylene
• Lid compatible with any 3/4" NPT hose

Universal  Floor Mount

• Jugs snap in
• Reduces any chance of tip overs
• Lockable design for anti theft

Hose Bender

• Cap locks the hose in bent position
• Easy to fill

Email Tristana@browardmotorsports.com

• Approximate install time is 15 minutes
• Assault chassis winch
• 2500lb with steel cable
• Kit includes Polaris style, mini rocker switch, contactor, cable hook stopper, mount similar to 10-1740
• Comes completely assembled and ready to install

Email Tristana@browardmotorsports.com

• 100% MADE IN USA.
• Works with the KFI Products Winch mount and a Winch installed
• Constructed of 3/16" Grade 50 steel
• Powder coated black for supreme durability
• All mounting hardware included
• Complete installation instructions included

NOTES:

**Must use winch mount #10-0550

# Must use winch mount #10-1515

@ 10mm Radius Rod holes

& 12mm Radius Rod holes

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

12-Piece helmet display
•    Includes 12 angled shelves to display helmet neatly in full view
•    Industrial looking branded signs available, 4 total to a set
•    Assembly instructions included
•    Insert signs must be ordered separately

Email Tristana@browardmotorsports.com

• Designed to install inner circlips on UTV and small vehicle U-Joints
• Magnet holds clips securely in place during installation
• Ultra-thin profile for easy clip installation.
• Patent pending V blade works with virtually all UTV U-Joints
• Durable plastic handle with integrated steel strike plate
• Hardened tool steel blade for durability

Email Tristana@browardmotorsports.com

• Lightweight and portable, with a 750 lbs single line pulling capacity
• Includes 40' of 5/32" steel or synthetic rope, integrated hawse fairlead, and rigging hooks (front and rear)
• Free-spool clutch makes rigging fast and easy
• Powered by a standard portable drill (not included)

Email Tristana@browardmotorsports.com

Highway 21 Jeans are a classic straight-leg pant for men. Purposed solely for self-preservation, it provides the highest level of Aramid Fiber and CE protection in high impact zones. When obstacles keep multiplying and streets grow hostile, put on your armor and guard yourself with the Blockhouse Jeans.

Email Tristana@browardmotorsports.com

• Safely removes and installs the upper spherical bearing on rear shocks
• Fits 24mm OD bearings
• Durable hardened tool steel construction
• Reversible puller cup with cutaway fits a wide variety of shock reservoir and compression adjuster configurations
• Durable brass thrust washer
• 1 year limited warranty

Email Tristana@browardmotorsports.com

• Designed to press bearing cups out without damage to the bearings or the yoke
• Compact design allows U-Joints to be disassembled on the vehicle
• Durable hardened steel construction with black oxide coating
• Fully adjustable arms will fit most UTV and ATV applications
• Original Motion Pro Design
• Not for use with impact guns
• Tool used for U-joint disassembly only
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• Formulated with advanced Polyetheramine (PEA) detergents
• Cleans and degreases carburetors, chokes, brake calipers and rotors, air intakes, throttle bodies and any unpainted metal parts
• Fast drying
• Will not harm catalytic converters or oxygen sensors
• Does not contain CFC's or chlorinated solvents
• 50 state VOC compliance

Email Tristana@browardmotorsports.com

Construction
60% ring-spun cotton and 40% polyester blend
Fit
Premium crew neck fit: contoured to your body

Email Tristana@browardmotorsports.com

Construction
60% ring-spun cotton and 40% polyester blend
Fit
Premium crew neck fit: contoured to your body

Email Tristana@browardmotorsports.com

• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.
• The visor has been designed to direct air into the ports for enhanced airflow.
• Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.
• The inner and outer surfaces are engineered to minimize the effects of oblique impacts.
• Side shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.
• Soft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.
• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption
• Emergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.
• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.
• Removable comfort liner with SILVERPLUS® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.
• Anti-microbial liner is removable and washable.
• Stainless steel D-rings to ensure a tight and secure fit.
• A size Medium weighs 1370g (DOT).
• The SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.
• Maximized ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.
   

Email Tristana@browardmotorsports.com

• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.
• The visor has been designed to direct air into the ports for enhanced airflow.
• Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.
• The inner and outer surfaces are engineered to minimize the effects of oblique impacts.
• Side shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.
• Soft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.
• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption
• Emergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.
• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.
• Removable comfort liner with SILVERPLUS® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.
• Anti-microbial liner is removable and washable.
• Stainless steel D-rings to ensure a tight and secure fit.
• A size Medium weighs 1370g (DOT).
• The SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.
• Maximized ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.
   

Email Tristana@browardmotorsports.com

• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.
• The visor has been designed to direct air into the ports for enhanced airflow.
• Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.
• The inner and outer surfaces are engineered to minimize the effects of oblique impacts.
• Side shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.
• Soft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.
• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption
• Emergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.
• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.
• Removable comfort liner with SILVERPLUS® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.
• Anti-microbial liner is removable and washable.
• Stainless steel D-rings to ensure a tight and secure fit.
• A size Medium weighs 1370g (DOT).
• The SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.
• Maximized ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.
   

Email Tristana@browardmotorsports.com

• Thermostat with gasket.
• Direct OEM replacement opens at same temperature as OEM.
• Aids in faster warmup times.

Email Tristana@browardmotorsports.com

• Flexible LED strips are less than 1mm thick and can bend around a .5" radius
• Waterproof and extremely light weight, great for under body accent lighting
• Concussion and abrasion resistant
• Attaches with 3M® VHB double sided tape for long term adhesion
• LED's are spaced 12mm apart, (Extreme White 6mm apart)
• For use with 12 volt DC systems, sold each
• Made in the U.S.A.

Email Tristana@browardmotorsports.com

• Thermostat with gasket.
• Direct OEM replacement opens at same temperature as OEM.
• Aids in faster warmup times.

Email Tristana@browardmotorsports.com

• Thermostat with gasket.
• Direct OEM replacement opens at same temperature as OEM.
• Aids in faster warmup times.

Email Tristana@browardmotorsports.com

• Thermostat with gasket.
• Direct OEM replacement opens at same temperature as OEM.
• Aids in faster warmup times.

Email Tristana@browardmotorsports.com

• Thermostat with gasket.
• Direct OEM replacement opens at same temperature as OEM.
• Aids in faster warmup times.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

HEAD LIGHT GUARD

• Hybrid light guard with strong aluminum frame, and polycarbonate protector
• Protect headlight lens from road hazard debris 

REVOLVER SHIFT LEVER

• Revolving shift tip design provides best shift positions for all riders.
• Rotating shift tip provides 6 different positions, offer more sensitive shift position adjustment.
• Shift arm is made of A2014 forged aluminum for durability.
• Forged arm is black anodized finish with laser print logo.
• Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip

*Remove shift linkage and install this
shift lever, provide more secure and direct shifting.
** Neutral position will be sensitive.

DRIVE COVER

• Super lightweight drive cover designed for Monkey 125
• Made from A7009-T6 anodized aluminum

HEEL GUARD

• Protects your heel from the chain and the rear sprocket
• Made of CNC machined A7009-T6 aluminum

ENGINE PLUG

• CNC machined engine plugs
• Replaces stock plugs to give a factory bike look
• Laser printed ZETA logo

SIDE STAND EXTENDER

• Kick stand extension plate provides more stability on uneven surfaces and soft ground
• Plate back side press fit nuts provides more grip / traction even slippery road surface
   

PIVOT LEVER SET

• Lever folds outward to prevent breakage in the event of a crash
• Lever adapter is ultra precise CNC machined out of high grade aluminum for super light weight design
• Includes clutch and brake

STEERING STEM NUT

• CNC Machined steering stem nut 
• Made of A7009-T6 aluminum, light weight design

MAGNETIC DRAIN BOLT

• Magnetic drain bolts designed to pick up excess bits of metal in your engine oil
• Made of A7009-T6 aluminum. Light weight design
• Press fit magnet on the drain plugs
• Includes safety wire holes to prevent mispaced part

BRAKE RESERVOIR COVER

• Made of CNC machined A7009-T6 aluminum
• Anodized finish colors. Available in red, blue

OIL FILLER PLUG

• CNC machined oil filler cap
• Available in anodized colors of blue, black, red
• Laser printed ZETA logo

Email Tristana@browardmotorsports.com