Email Tristana@browardmotorsports.com

• Caliper mounting allen bolts and washers
• Chrome plated and Polished
• Made in the USA

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

IGNITOR OPEN FACE BALACLAVA

 Breathable open faced design

 CoolMax upper keeps you warm and dry

 Windproof Lower construction

 Fits comfortably under most helmets

 Extended shoulder panels for maximum coverage

 Reflective logos for visibility and safety

Email Tristana@browardmotorsports.com

IGNITOR OPEN FACE BALACLAVA

 Breathable open faced design

 CoolMax upper keeps you warm and dry

 Windproof Lower construction

 Fits comfortably under most helmets

 Extended shoulder panels for maximum coverage

 Reflective logos for visibility and safety

Email Tristana@browardmotorsports.com

• Detects internal engine cooling system leaks
• Quickly reveals external cooling system leaks
• Kit includes hand pump with pressure gauge and 12 adapters to fit most power sport/automotive applications and storage case

Email Tristana@browardmotorsports.com

• 200g of 3M Thinsulate™ thermal insulation
• Moisture wicking removable inner liner
• Genuine leather upper for improved strength, durability,  and wear protection
• Reflective panels and logos for increased visibility and safety
• Rubber sole for exceptional traction
• Oversized padded boot laces for easy tightening
• Triple stitched for extra durability
• Padded boot insole for extra comfort
• Smooth finished lace loops for extra seat protection

Email Tristana@browardmotorsports.com

• Includes handle, reversible shank and 2 double sided bits
• Chrome vanadium steel bits
• Shank openings serve as ¼" or 6 mm and 5/16" or 8 mm nut driver
• Bit sizes: Slotted - 3/16" and 1/4", Phillips - #1 and #2
• Handle and shank feature ball spring retention for a positive fit
• Lifetime warranty

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Direct replacements for original clutch washers that are prone to failure
• Precision machined from tool grade steel to increase durability
• Will not break up and damage engine at end of service life
• Great substitution when rebuilding superchargers using OEM rebuild kit

* NOTE: Designed to be used with OEM supercharger shaft found on `04-05 215 models.  If supercharger was rebuilt using OEM# 420-881-102, use washer kit WPS# 59-2252

† NOTE: Must be used with 2006 style supercharger shaft # 420-881-946.  Designed to be used with the OEM supercharger shaft found on `06-07 185/ 215 models.  If supercharger was rebuilt using OEM# 420-881-102, use washer kit WPS# 59-2252

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Removes GPS controlled speed limiter
• Increases top speed utilizing stock ECU
• Works on all '11-15 260HP models
• U.S. models will gain 3mph with use of Solas SRX-CD 15/20 impeller (WPS# 20-8099)
• Allows further speed gains through aftermarket modifications
• Allows system to start in "sport mode", can be manually switched to "touring mode" after start up
• All original dash functions are retained

NOTE: Stock ECU limits peak RPM for first 5 hours of operation.  Top speed increases should be measured after 5 hour break in period

Email Tristana@browardmotorsports.com

• Removes restrictive speed control function
• Delivers 3-4 mph to stock craft through OEM ECU
• Allows further top speed gains through aftermarket modifications
• Does not affect speedometer accuracy, Eco Mode, or Cruise Control functionality
• All original dash functions are retained
• Easy plug-in installation

Email Tristana@browardmotorsports.com

• Repairs leather and vinyl upholstery, dashboards, vinyl tops, marine upholstery, and luggage
• Includes everything needed for repairs, electric heat iron, color compounds, plastic dashboard hardening powder, and more
• Works great for PWC, marine, ATV/ UTV, and motorcycle

Email Tristana@browardmotorsports.com

• Produces more horsepower through increased air flow
• Precision tapered billet sleeve directly replaces restrictive mesh element in intake tract
• Provides improved low end punch and mid range pull
• Easy installation
• Riva testing has determined the stock ECU will compensate for increased air flow
• REQUIRES aftermarket power filter kit to meet U.S. Coast Guard certified flame arrestor requirements

NOTE: These items are designed exclusively for closed course competition use ONLY.  Use on public lands/ waterways in the state of California is illegal.

Email Tristana@browardmotorsports.com

• Enables Yamaha 1.8 Liter naturally aspirated engine to produce more horsepower by delivering increased air flow
• Precision tapered billet sleeve directly replaces restrictive mesh element in intake manifold
• Provides low end punch and mid range pull
• Quick and easy installation
• Riva testing has determined the stock ECU will compensate for increased air flow
• REQUIRES Coast Guard approved aftermarket filter kit to meet flame arrestor requirements

NOTE: These items are designed exclusively for closed course competition use ONLY.  Use on public lands/ waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

• Produces more power through increased boost pressure (+1lb)
• Supplied hole cutting tool allows easy removal of restrictive screen element from inside of intake manifold
• Special o-ringed billet block-off plug with integrated fitting for aftermarket boost pressure gauge fills opening left after removal of screen element
• Riva testing has determined stock ECU will compensate for increased boost

NOTE: These items are designed exclusively for closed course competition ONLY.  Use on public lands and/or waterways in the state of California is illegal

Email Tristana@browardmotorsports.com

• Facilitates loosening and tightening of hard to reach rear axle nut on H-D® baggers
• Fits 36 mm axle nuts
• Captive swivel extension with ½ inch drive
• Rated for up to 175 foot pounds of torque
• Durable plastic sleeve protects exhaust system
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• Eliminates stock steel rock guard plates for less weight
• Tapered lug holes
• Incorporates built in rock guards
• Pre-installed valve stems

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Building performance exhaust systems for the factory race efforts improves our research and development, which improves the overall performance of our products. Adapting technology we learn on the track to our consumer products is what makes the Yoshimura name synonymous with quality and performance. One look at our RS-9 and RS-4 exhaust systems illustrates the endless cycle of development. Working in conjunction with the factory teams has provided us with new ways to increase performance, lower sound levels and centralize mass. The end result is a product that gives you an unparalleled competitive advantage.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Engineered for an optimized women’s fit, especially around the calf area, the Stella Tech 3 Boot is packed with class-leading Tech family comfort and protective features, such as the one-piece injection foot shell for impact protection and the innovative buckle closure system for a highly personalized fit.

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Specially designed fork seal driving tools for front forks.
• Comes with different size plastic adapters. Can be used for almost all of conventional and up side down front forks.
• Adapter sizes 40/41,42/43,45/46,47/48,49/50mm
• Mini driver kit 26-33 , 34-39mm
• Flange shape design of steel body for accurate operation with less power

Email Tristana@browardmotorsports.com

XC PROTECTOR

• Larger shields protect hands from brush, roost and the elements
• Perfect shields for off-road and enduro applications
• Deflector-shields for Armor hand guards.
• Available in 7 colors.

XC FLASHER PROTECTOR

• Allows for the removal of stock flashers, less weight, more compact, and less vulnerable 
• Deflector-shields for Armor hand guards.
• Available in 3 colors.

XC-PRO PROTECTOR

• Largest deflector-shields for Armor hand guards.

• Protect your hands from brush, roots and the elements.

• Best to use for Extreme, hard Enduro racing.

• Comes with mounting screws for armor hand guards.

• Available in 2 colors, white and black.

•  

X3 PROTECTOR

• Protector comes with master cylinder guard.
• Master cylinder guard can be adjusted 2 different positions.
• Protects your hand from brush, roots and the elements.
• Available in 5 shell colors.

Email Tristana@browardmotorsports.com

• Black rubber fuel hose with five layer extrusion
• Available in 1/4" & 5/16" I.D. sizes
• Suitable for use with carbureted and fuel injected applications (up to 100 psi)
• SAE J30R9 compliant
• Meets CARB spec EO#C-U-07-017 and EPA 1051.110
• Made in the USA

Email Tristana@browardmotorsports.com

• Prevents brace rub & secures fit
• Fits under all braces
• Sold in pairs

Email Tristana@browardmotorsports.com

Dropping weight is one of the most efficient ways of improving lap times on the track. If you have a Yoshimura exhaust system, why not take weight savings to max with this lightweight aluminum muffler bracket?

Email Tristana@browardmotorsports.com

Sprocket Jammer

Email Tristana@browardmotorsports.com

Countershaft Seal Puller

Email Tristana@browardmotorsports.com

5 in 1 Damper Rod Bleed Tool

Email Tristana@browardmotorsports.com

T-6 Valve Spring Compressor

• Quick release system presses straight against the retainer to eliminate side loading the valve and keepers
• Works on all motorcycle, ATV, UTV, and small engine cylinder heads
• Billet 6061 aluminum frame provides unmatched strength and stiffness and lower weight
• Fully adjustable top and bottom
• Aluminum lower adjuster will not damage or scratch valves
• Compatible with Motion Pro 08-0248 adapters
• Includes universal fork style tip
• Optional adapters
• Alternate adapter sizes for the T-6 Valve Spring Compressor
• Kit includes 18mm and 28mm adapters

Email Tristana@browardmotorsports.com

Crankshaft Puller

• Precision tool used to install press-in crankshafts into an engine case.
• Time saving method maintains crankshaft true during installation.
• Universal steel nut adapter works on virtually all crankshafts.
• 25mm and 40mm billet aluminum face plate adaptors ensure crankshaft is pulled perfectly straight into bearings.
• Reversible pull stud with both M10x1.25 and M12x1.25 threads.
• Eliminates the need for a shop press to install crankshaft.
• Machined brass thrust washer for extra durability.

Email Tristana@browardmotorsports.com