Fizzle Z2 Supercharger Impeller for Yamaha SVHO Watercraft
FIZZLE-Z2
Regular price
$599.00
Save $-599.00
Fizzle Z2 Supercharger Impeller
Increase top speed, acceleration and throttle response with the Fizzle Z2 Supercharger Impeller! More torque and more horsepower = more fun!!
Weighing in at just 97 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are 6 PSI more boost pressure and 400+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!
The Fizzle Z2 Supercharger Impeller will boost 24+ PSI @ 9300 RPM and will max out at more than 26 PSI at higher RPM levels.
We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
Technical notes:
All 3 Fizzle wheels weigh less than 100 grams each, giving them a more than 10% weight savings over the factory OEM billet wheel.
All of the Fizzle supercharger wheels are drop-in wheels, meaning they do not need any modifications to the supercharger housing.
Fueling requirements and fuel delivery upgrades will depend on the recommendations/requirements from whomever is tuning the ECU
Boost pressure is directly tied to engine RPM, so the boost output will vary according the RPM that each ski is set up to run. For this reason, we use direct back-to-back test results against the factory supercharger output as a benchmark to compare to for all of our superchargers instead of labeling each wheel by a boost output number.
Removable, floating wireless Bluetooth® footwell speakers features a quick-release mechanism for charging and listening on the beach. Mounting brackets are permanently mounted on unit.
2000 on STX, 1200 STX-R, 15F, 03 STX 12F
WR219
Regular price
$198.95
Save $-198.95
Description
The largest of the Kawasaki range, the STX introduced in 2000 as a two-stroke and then in later models fitted with the 12F and 15F four-stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi. Performance benefits include: - Better hook up in all conditions - No top speed loss - Better pump loading in rough water - Holds the boat on the water giving better control - Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the boat sliding out
2006+ Superjet Pump Shoe
WR06009
Regular price
$169.95
Save $-169.95
Description
Worx Racing cast aluminum pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow the use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits all Yamaha Superjets and most aftermarket hulls.
2008+ Freestyle - Freeride
WR312
Regular price
$250.00
Save $-250.00
Description
Benefits Include:
- Specifically designed for the 2008 Superjet hull
- Better drive and control
- Greater stability
2008+ FX, FX SHO, FZR, FZS, VXR, VXS
WR06008
Regular price
$159.95
Save $-159.95
Description
Tapered offset to match OEM reduction nozzle
Creates even pressure in reduction nozzle too reduce pump cavitation
Increased acceleration, drive and top speed
Suits all ‘3 bolt’ 1.8 Yamaha pump models
2008+ Superjet
WR228
Regular price
$182.00
Save $-182.00
Description
- Specifically designed of the 2008+ Superjet Hull - Deeper scoop for improved hook up and turning - Great in rough water and for surf riding - Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn
For a less aggressive alternative try our WR205. Fits all year model Superjets.
