JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph

JP-Racing-Stage1-Kit

$935.00

Save $-935.00
-2 in stock

Speeds:

RXP - 78+ MPH

RXT - 80+ MPH

Stage 1 Kit Includes: Mail In ECU Re-flash, JP Racing Intake, and JP Racing Oil Catch Can.

JP RACING INC Mail In ECU Re-Flash is a great way to get the most speed and performance out of your personal watercraft. Our FLASH controls all the parameters of your ecu such as RPM limits, Fuel Maps, Ignition Timing, Throttle Response.
Our Re-Flash eliminates all the OEM speed limiter control. Modifying these components greatly improves throttle response and top end speed in a reliable and safe way. Once purchased we will email you paperwork to fill out and how to send in. 

JP RACING INC Rear Air Intake System. The rear air intake system feeds your supercharged engine direct air delivering greatly improved acceleration and top speed. Replaces restrictive stock air box with a high-volume 4 inch Marine Grade JP RACING INC air filter. Simple installation & easy location gives you access to your entire engine compartment.

JP RACING INC Seadoo Oil Catch Can eliminates power-robbing blow by fumes and oil vapor from your engine's air intake tract. Also improves intercooler efficiency by preventing oil sludge coating that saturates inside of the intercooler. Excess oil vapor is routed to our stainless steel catch can where it collects for draining via petcock valve. Kit includes breather filter, Stainless catch can and 3/4 hose to complete a 15min installation.

NOTE:

JP RACING INC strongly recommend the use of premium octane (91+) pump fuel in your PWC.

JP RACING INC recommends your wear ring, impeller, oil level and spark plugs be of correct working order for best results.

JP RACING INC  Stage Kits intended for competition use only, no warranties have been implied and you assume all risk modifying your PWC.

JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph
JP Racing Sea-Doo 300 Stage 1 Kit 79+Mph

You may also like

Quick View
17-23 EX/JETBLASTER Footwell Speakers
$619.95
Quick View
2000 on STX, 1200 STX-R, 15F, 03 STX 12F
$198.95
Quick View
2006+ Superjet Pump Shoe
$169.95
Quick View
2008+ Freestyle - Freeride
$250.00
Quick View
2008+ FX, FX SHO, FZR, FZS, VXR, VXS
$159.95

17-23 EX/JETBLASTER Footwell Speakers

F3Y-H81C0-S0-00-1

$619.95

Save $-619.95
Removable, floating wireless Bluetooth® footwell speakers features a quick-release mechanism for charging and listening on the beach. Mounting brackets are permanently mounted on unit.
17-23 EX/JETBLASTER Footwell Speakers
17-23 EX/JETBLASTER Footwell Speakers
17-23 EX/JETBLASTER Footwell Speakers
17-23 EX/JETBLASTER Footwell Speakers

2000 on STX, 1200 STX-R, 15F, 03 STX 12F

WR219

$198.95

Save $-198.95

Description 

The largest of the Kawasaki range, the STX introduced in 2000 as a two-stroke and then in later models fitted with the 12F and 15F four-stroke engines these boats really benefit from an efficient intake grate to properly load the pump and get the best from your Kawi.
Performance benefits include:
- Better hook up in all conditions
- No top speed loss
- Better pump loading in rough water
- Holds the boat on the water giving better control
- Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stops the boat sliding out

2000 on STX, 1200 STX-R, 15F, 03 STX 12F - Broward Motorsports Racing
2000 on STX, 1200 STX-R, 15F, 03 STX 12F - Broward Motorsports Racing
2000 on STX, 1200 STX-R, 15F, 03 STX 12F - Broward Motorsports Racing
2000 on STX, 1200 STX-R, 15F, 03 STX 12F - Broward Motorsports Racing

2006+ Superjet Pump Shoe

WR06009

$169.95

Save $-169.95

Description

 

Worx Racing cast aluminum pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow the use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits all Yamaha Superjets and most aftermarket hulls.

2006+ Superjet Pump Shoe - Broward Motorsports Racing

2008+ Freestyle - Freeride

WR312

$250.00

Save $-250.00

Description 

Benefits Include:

- Specifically designed for the 2008 Superjet hull

- Better drive and control

- Greater stability 

2008+ Freestyle - Freeride - Broward Motorsports Racing

2008+ FX, FX SHO, FZR, FZS, VXR, VXS

WR06008

$159.95

Save $-159.95

Description 

  • Tapered offset to match OEM reduction nozzle
  • Creates even pressure in reduction nozzle too reduce pump cavitation
  • Increased acceleration, drive and top speed
  • Suits all ‘3 bolt’ 1.8 Yamaha pump models
2008+ FX, FX SHO, FZR, FZS, VXR, VXS - Broward Motorsports Racing

2008+ Superjet

WR228

$182.00

Save $-182.00

Description 

- Specifically designed of the 2008+ Superjet Hull
- Deeper scoop for improved hook up and turning
- Great in rough water and for surf riding
- Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate acts like a brake to slow you into the turn

For a less aggressive alternative try our WR205. Fits all year model Superjets.

2008+ Superjet - Broward Motorsports Racing
2008+ Superjet - Broward Motorsports Racing
2008+ Superjet - Broward Motorsports Racing
2008+ Superjet - Broward Motorsports Racing
Back to Racing Parts