DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE

02-01-012

$599.95

Save $-599.95
1 in stock

Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1.

 



Tubbie Destroyer is fully removable with an average 10 minute per side install. Composite backed, the Destroyers do not use screws for installation. Three(3) machined billet and stainless coupling inserts per side are included with each set of Destroyer sponsons. That is all that is required for hardware install! This is the ultimate in customized front sponson set ups and allows each rider to adapt to different riding conditions and test with ease. Designed exclusively for the shape of the 2008 and newer Super Jet hull shape and FX1, these sponsons put to bed and DESTROY other poorly made copy cat front sponsons offered.

Racing, Freeriding and Freestyling the new improved 2008+ Newer Super Jet hull design has been a thrill for anyone that was frustrated by the 11+ years of no changes or improvements of the 1996-2007 Yamaha Super Jet . With the addition by Yamaha in 2008 of the subtle and long concave Tubbie shape incorporated into the OEM hull (wonder where they got that idea?), we had very few complaints against an incredibly well designed bottom hull design. What we have found was the 08+ current SJ was still not responding to the more aggressive riders. Not enough Tubbie! Thus we developed and shaped these removable Tubbie Destroyers to improve upon the 2008+ current OEM Yamaha bottom hull design. For Freeriding we tested and found the "sweet-spot" install location with direct feedback from our Blowsion Sponsored Pro Freeride World Champions ROSS CHAMPION and AIR DARIN ANDERSON.

For racers shredding the buoys, the Tubbie Destroyers for the 08+ current SJ allow the hull to sit slightly deeper in the water, while still giving the ski the well known benefits of the Tubbies aggressive turning, hook up and bow buoyancy. This, all without creating too much flotation and side to side instability at mid speeds. We have found with the addition of the Destroyers the 08+ current SJ is much less fatiguing to the racer as it becomes easier to maneuver around the course on long motos. Like all the Tubbie models offered by Blowsion, the Destroyer for the 2008= current Super Jet and FX1 is a win-win benefit to any rider or ski. Constructed specifically with the aggressive racer and freerider in mind. Each set available in polished White or Black gel coat and includes detailed installation instructions with all stainless and billet aluminum

DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE
DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE
DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE
DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE
DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE
DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE

You may also like

Quick View
HT Fluid Oil Extractor 6 Liter
$79.95
Quick View
RRP Adjustable Throttle Lever Kits
$85.00
Quick View
WORX Superjet exhaust stinger
$69.95
Quick View
2006+ Superjet Pump Shoe
$169.95
Quick View
Salt Off Concentrate 32 oz Kit with Applicator
$38.99

HT Fluid Oil Extractor 6 Liter

18-2722

$79.95

Save $-79.95

This versatile tool is great for extracting oil and other liquids (Not for us with Gas). Use it with your PWC, snowmobile, ATV, boat, lawn mower, etc. Holds up to 6 liters (1.57 gal) in this sturdy portable container. Removable pump included. 

HT Fluid Oil Extractor 6 Liter

RRP Adjustable Throttle Lever Kits

RRP-TH-LEVER-RD

$85.00

Save $-85.00
These Rick Roy throttle levers with adjustable length are made from CNC machined Billet Aluminum 6061 t6. The lever is adjustable to fit the riders finger size. Everyone has a preference when it comes to throttle finger, and hand size is also a factor. Ergonomically designed to give the rider a good grip and good feeling. Comes with Yamaha and Kawasaki stainless steel cable adapters.
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits
RRP Adjustable Throttle Lever Kits

WORX Superjet exhaust stinger

WR04041

$69.95

Save $-69.95

Description 

WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Used by all Pro National and World Lites class Champions 

WORX Superjet exhaust stinger - Broward Motorsports Racing

2006+ Superjet Pump Shoe

WR06009

$169.95

Save $-169.95

Description

 

Worx Racing cast aluminum pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow the use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits all Yamaha Superjets and most aftermarket hulls.

2006+ Superjet Pump Shoe - Broward Motorsports Racing

Salt Off Concentrate 32 oz Kit with Applicator

62-0220

$38.99

Save $-38.99

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

  • Removes salt deposits from all marine surfaces
  • Use as a motor flush in I/O and outboard engines
  • Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
  • Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

Salt Off Concentrate 32 oz Kit with Applicator

Salt Off Concentrate 32 oz

62-0219

$23.95

Save $-23.95

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

  • Removes salt deposits from all marine surfaces
  • Use as a motor flush in I/O and outboard engines
  • Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
  • Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

Salt Off Concentrate 32 oz
Back to Superjet 2008 / 19