WORX Ultra 300, 310, 310R

HT Fluid Oil Extractor 6 Liter

18-2722

$79.95

This versatile tool is great for extracting oil and other liquids (Not for us with Gas). Use it with your PWC, snowmobile, ATV, boat, lawn mower, etc. Holds up to 6 liters (1.57 gal) in this sturdy portable container. Removable pump included.

Broward Motorsports Racing 1500 SX-R Piston Installation Tool

BM70-60-20

$619.95

With the release of the Kawasaki 1500 SX-R and the engine modifications required to compete in the top standup racing class. One of the first changes to the engine is rods and pistons. It was very clear that the changing and installation of the pistons was extremely complicated, Sam Nehme of Broward Motorsports has developed this amazing tool that will allow installation of all four pistons at one time. No more damaged rings and oil ring. This tool will work on all Kawasaki STX-12F/ STX-15F/ Ultra 250XI/ 1500SX-R

This kit now also comes with an extra set of piston pin and piston skirt alignment rods to assist with most aftermarket pistons as well

Broward Motorsports Racing 1500 SX-R Piston Installation Tool

Liquid Moly Marine PWC Oil 10W-40 4 Liter

20530

$36.99

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

Honda
Kawasaki
SeaDoo
Suzuki
Yamaha

Liquid Moly Marine PWC Oil 10W-40 4 Liter

NGK 4548 CR9EK Spark Plugs - Kawasaki Ultra LX, STX 12F/ 15F Engines

2-CR9EK

$9.94

Multi-Ground Electrodes Improve Ignition Capabilities and are Less Sensitive to Increased Voltage Requirements Due to Gap Growth. Designed to Specific Manufacturer Ignition Requirements, NGK's Multi-Ground Plugs Maintain All the Features of Their Standard Plugs.

Key Features:

Corrugated Ribs to Prevent Flashover
Pure Alumina Silicate Ceramic Insulator, Providing Superior Strength and Better Heat Transfer
Copper Core to Aid in Heat Removal
Triple Seals to Prevent Leakage

NGK 4548 CR9EK Spark Plugs - Kawasaki Ultra LX, STX 12F/ 15F Engines

Salt Off Concentrate 32 oz Kit with Applicator

62-0220

$38.99

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

Removes salt deposits from all marine surfaces
Use as a motor flush in I/O and outboard engines
Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

Salt Off Concentrate 32 oz

62-0219

$23.95

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

Removes salt deposits from all marine surfaces
Use as a motor flush in I/O and outboard engines
Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

WORX Ultra 300, 310, 310R

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

Description

Features

Directions

Description

Features

Directions

UNLOCK 10% OFF