Wamilton's WaveBlaster Ride Plate

Salt Off Concentrate 32 oz Kit with Applicator

62-0220

$38.99

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

Removes salt deposits from all marine surfaces
Use as a motor flush in I/O and outboard engines
Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

Salt Off Concentrate 32 oz

62-0219

$23.95

Description

Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.

The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.

Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.

Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.

Features

Removes salt deposits from all marine surfaces
Use as a motor flush in I/O and outboard engines
Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
Suggested mix ratio for automatic mixers: 1:512 (1 OZ per 4 GALLONS)

Directions

To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.

To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.

To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.

NOTE: Do not store Salt Off® in applicator when not in use.

DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE

02-01-012

$599.95

Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1.

Tubbie Destroyer is fully removable with an average 10 minute per side install. Composite backed, the Destroyers do not use screws for installation. Three(3) machined billet and stainless coupling inserts per side are included with each set of Destroyer sponsons. That is all that is required for hardware install! This is the ultimate in customized front sponson set ups and allows each rider to adapt to different riding conditions and test with ease. Designed exclusively for the shape of the 2008 and newer Super Jet hull shape and FX1, these sponsons put to bed and DESTROY other poorly made copy cat front sponsons offered.

Racing, Freeriding and Freestyling the new improved 2008+ Newer Super Jet hull design has been a thrill for anyone that was frustrated by the 11+ years of no changes or improvements of the 1996-2007 Yamaha Super Jet . With the addition by Yamaha in 2008 of the subtle and long concave Tubbie shape incorporated into the OEM hull (wonder where they got that idea?), we had very few complaints against an incredibly well designed bottom hull design. What we have found was the 08+ current SJ was still not responding to the more aggressive riders. Not enough Tubbie! Thus we developed and shaped these removable Tubbie Destroyers to improve upon the 2008+ current OEM Yamaha bottom hull design. For Freeriding we tested and found the "sweet-spot" install location with direct feedback from our Blowsion Sponsored Pro Freeride World Champions ROSS CHAMPION and AIR DARIN ANDERSON.

For racers shredding the buoys, the Tubbie Destroyers for the 08+ current SJ allow the hull to sit slightly deeper in the water, while still giving the ski the well known benefits of the Tubbies aggressive turning, hook up and bow buoyancy. This, all without creating too much flotation and side to side instability at mid speeds. We have found with the addition of the Destroyers the 08+ current SJ is much less fatiguing to the racer as it becomes easier to maneuver around the course on long motos. Like all the Tubbie models offered by Blowsion, the Destroyer for the 2008= current Super Jet and FX1 is a win-win benefit to any rider or ski. Constructed specifically with the aggressive racer and freerider in mind. Each set available in polished White or Black gel coat and includes detailed installation instructions with all stainless and billet aluminum

DESTROYER SPONSONS - 2008+ SUPERJET/FX-1 - WHITE

ODI Xtreme Lock-On Grips, 130mm Graphite

206-1252

$29.95

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

Key Features:

130mm Length
3/4 Flange
Agressive Diamond/Diamond Plate Pattern
Extra Tacky Surface for More Control
New Snap Cap End Plugs Included

ODI Xtreme Lock-On Grips, 130mm Graphite

BMS Kawasaki 1100 Billet Aluminum MSD Pick Up Plate

BM71-60-10

$199.95

This BMS MSD pick up plate is necessary to mount the 3 MSD pick ups properly and accurately to your Kawasaki 1100 2-stroke engine. This plate along with the BMS Billet Flywheel is the perfect combination to go fast while staying reliable! Hardware to mount the pick ups are included.

Wamilton's WaveBlaster Ride Plate

Description

Features

Directions

Description

Features

Directions

Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1.

﻿

UNLOCK 10% OFF