• Cobra's Short Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar Pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Short Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar Pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• Made in the USA

Email Tristana@browardmotorsports.com

• For riders who prefer things round over square, the new Cobra round Sissy Bars will be just the thing
• Built with the same Cobra quality as our square bars, our solid high strength steel round bars use the same simple installation method and the same support brackets
• Comes standard with a pad and a plain steel insert
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Standard Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar Pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra's Standard Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar Pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra's Mini Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• All mini sissy bars are square stock steel, unless otherwise noted as round stock.
• Made in the USA

Email Tristana@browardmotorsports.com

• Keep the boot scuff marks off your hard bags with a set of these stylish Cobra bag guards
• Simple to install (they come with everything you need to mount them), these laser-cut, chromed steel guards are set to offer protection while looking great
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra's Standard Sissy Bars make life easier for your passengers by offering back support
• These sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a sissy bar Pad
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation
• Made in the USA

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Cobra Freeway Bars are made from 1.25 inch thick-wall steel and deeply chromed for strength and long-lasting good looks
• They offer your tired dogs a different place to rest on those long hauls and provide a classic appearance
• Made in the USA

*  The freeway bar for the Grom is size appropriate and includes all the mounting hardware required for easy installation. It is approximately 27 inches wide, and uses two top struts to mount it securely to the frame above the engine, and lower mounts that bolt to the frame beneath the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

**  The freeway bar for the Rebel is size appropriate and includes all the mounting hardware required for easy installation. It mounts securely to the frame in front of the engine, and lower mounts bolt to the frame below the engine. It will provide a modicum of protection in the event of a low speed tip over. Black powder coated finish.

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

• Mid Mount System for most ATV's
• Plate constructed from steel and powder coated black for durability
• All mounting tabs are tapered to minimize snags while plowing
• Complete installation instructions included
• All mounting hardware included

Note:

P = We also recommend the HD Kit # 459-5955

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com

Description:

• Laser cut for consistent fit and finish
• Powder Coated black 
• Hardware Included
• 2 year Open Trail warranty

NOTES:

1= 2021 models must purchase bumper adapter #459-1895
2= No mount required, OEM integrated Mount
3=Requires drilling 1-2-holes
4=Includes mount and grill, mount only #459-0560
5=Requires Stock Bumper
8=Lead Rotation Required
14= Requires a fairlead bracket #459-1715
15= Requires a fairlead bracket #459-0695
16= Requires adding washers to shim up to fit due to size
18= Requires OEM stock and OEM aftermarket bumper
**= Requires Wire Extension Kit #459-0119

Email Tristana@browardmotorsports.com