• Cobra Detachable Luggage Racks use a proprietary pull release mechanism, so they can be easily and quickly installed or removed.
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

Rack uses Cobra's proprietary pull release mechanism, so they can be installed or removed in a matter of seconds.

Email Tristana@browardmotorsports.com

• Cobra's Bolt-on Wide Tube Luggage Rack allows you to add space for more luggage without adding a full time luggage rack
• Bolts directly to Cobra's Sissy Bars 
• Hardware included
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

• The Cobra Detachable 'Big-A'  Wrap Around Luggage Rack is a great feature on long trips and easily removable for a stripped clean appearance
• The rack was designed to utilize the seat for additional support and ability to carry larger, wider luggage.
• Uses the Cobra proprietary pull release mechanism for a quick and easy removal or installation
• Steel construction available in Black
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

​​​​​​

• For riders who prefer things round over square, the new Cobra Round Sissy Bars will be just the thing.
• Built with solid High Strength Steel in either a Short or Standard position
• Comes with a pad and a plain steel insert and all mounting hardware for an easy installation
• Available in Chrome or Black 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Cobra Chrome Square Sissy Bars make life easier for your passengers by offering back support, they also help carry your luggage.
• Built for the long haul, these sissy bars are made of High Strength Steel with heavy-duty mounting brackets and comes with a Freedom Pad.
• Now available in three sizes for most models; Standard, Short and Mini.
• Cobra's Sissy Bars use stock mounting points for a no fabrication installation.
• Available in Chrome or Black
• Made in the USA 

Email Tristana@browardmotorsports.com

• Custom, clean and functional with a unique V-Bend down low 
• 1.25" diameter Milled Steel tubing for superior strength 
• Comes with all mounting hardware for an easy install 
• Limited Lifetime Warranty 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Custom, clean and functional with a unique V-Bend down low 
• 1.25" diameter Milled Steel tubing for superior strength 
• Comes with all mounting hardware for an easy install 
• Limited Lifetime Warranty 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Custom, clean and functional with a unique V-Bend down low 
• 1.25" diameter Milled Steel tubing for superior strength 
• Comes with all mounting hardware for an easy install 
• Limited Lifetime Warranty 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Custom, clean and functional with a unique V-Bend down low 
• 1.25" diameter Milled Steel tubing for superior strength 
• Comes with all mounting hardware for an easy install 
• Limited Lifetime Warranty 
• Made in the USA 

Email Tristana@browardmotorsports.com

• Custom, clean and functional 
• 1.25" diameter Milled Steel tubing for superior strength 
• Comes with all mounting hardware for an easy install 
• Does not work with extended reach forward control kits 
• Limited Lifetime Warranty 
• Made in the USA

Email Tristana@browardmotorsports.com

• Vortex V3 2.0 Frame sliders are equipped with CONTROLLED FLEXION AREAS® and intelligent protections system designed to ensure that the sliders bend in certain areas to increase bike preservation by redistributing impact force away from the motorcycle frame and engine body
• Strong aluminum elements (alloy class 2017) ensure that the whole protection system will stand up to the toughest race conditions
• V3 2.0 Frame sliders are anodized matte black to avoid corrosion
• Molded impact pucks are made from special proprietary energy-absorbing material
• V3 2.0 Frame sliders are precision-made with CNC machines, each frame slider kit is made to fit specific bike models. No extra parts are needed to assemble this product when purchased properly 
• Detailed assembly instructions are included, Vortex recommends that its V3 2.0 frame sliders be installed by a certified motorcycle mechanic

Email Tristana@browardmotorsports.com

Freeway bars and case guards are designed to offer some protection in the case of a parking lot tip over or should someone knock over your motorcycle. Fatty bar uses 1.5" Steel tube.

Email Tristana@browardmotorsports.com

• A detachable backrest offers the convenience of a practical and comfortable back support, but one that is easily removed for around town riding.
• What really sets this detachable backrest system apart from the rest, is that there is no need to relocate the stock turn signals
• Sissy bars are square stock and are available in Chrome or Black, with a Black Vinyl  Leather Pad
• Bars come in either a Mini or Short position

• The backrest comes with the pad installed, ready to be mounted onto your bike.
• Each is bike specific and arrives with everything needed to install on the bike, including mounting hardware.
• Made in the USA 

Email Tristana@browardmotorsports.com

• The Cobra Tour Pack Docking Kit is required when using the Tour Pack Mount or Detachable Back Rest.
• These kits are sold separately 
• Designed specifically for the older Baggers 
• Made in the USA 

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

We a lot of rack options. We have those that bolt to the back rest. Then we have a line of detachable racks for Baggers, Softails, Dynas and Sportsters. All are model specific, so pick your bike and navigate to the perfect rack for your bike. Racks use our proprietary pull release mechanism, so the can be installed or removed in a matter of seconds Large footprint of the rack provides ample surface area upon which to place travel back and packs.

Email Tristana@browardmotorsports.com

Do you ride alone and want to load up your bike? These mounts are designed for the solo rider in mind.

Email Tristana@browardmotorsports.com

If you need a mounting kit for your Harley, Cobra exhaust is designed to fit perfectly with your bike.

Email Tristana@browardmotorsports.com

Get mounts for your Tour Packs that accommodate your 2-Up seat and rider

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

MONOKEY® CAM-SIDE SYSTEM

The Trekker and EVO Outback are cases studied especially for the off-road use. For supporting
all the demands that are subject in off road, they need fitting systems and side-case
holders stronger than the Monokey®. For this reason it has been studied that the new
Monokey® Cam-Side system, fixes the case in four different points maintaining at
the same time the possibility to release from the rack quickly. The specific side-case
holders are  manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order
to strengthen the structure. Besides the panel of the frame where the case is linked,
it is better if the rubber supports points are moved in the perimetric zones of the case.

• Volume: 37 Liter, 48 Liter, 42 Liter, & 58 Liter
• Weight of cases lbs: 12.65, 13.5, 13.29 & 15.6
• Color: Brushed Aluminum / Matte Black
• Construction: Aluminum
• Max Load lbs: 22, 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

Note: Cannot be fixed to plates equipped with the stop light kit connection.

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

• The softest, most durable, chemical resistant grip on the market today
• A true vibration dampening grip 
• Available in small, medium and large diameters for all Harley-Davidsons. 
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE, 23 FLHXSE, FLTRSXE
• Chrome and Black Anodized Aluminum ends
• Fits 1” bars
• Sold in pairs

Email Tristana@browardmotorsports.com

"Contoured for your hands, custom for your bike!"

• Manufactured in the USA with Kraton rubber and feature a very soft serrated texture to help hang on to your bike
• Finished off with only the best 6061 Billet Aluminum end caps and collars
• Outer Diameter 1.45"
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STE & 23 FLHXSE, FLTRXSE
• Fits 1” bars
• Sold in pairs
• Made in the USA

Email Tristana@browardmotorsports.com

"Air Ride For Your Hands!"

• The Avon Air Cushion Anodized grips feel great and are very functional too
• Manufactured in the USA with a special core bar that creates air pockets inside the grip body
• Dampen vibrations, help eliminate the tingle in your hands and soften the overall feel of the ride
• The soft serrated texture on the grip surface helps you hold on to your bike
• 6061 billet aluminum end caps and collars
• Outer Diameter 1.625"
• Sold in pairs
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHSXE, FLTRXSE

* Not for use with Excalibur, Gatlin, Rival, Castle, Deep Cut, Slots or Spiked grips

Email Tristana@browardmotorsports.com

• New from AVON Grips is the Diamond Contour Grip.
• With similar features as the popular Custom Contour, Avon’s new Diamond texture is sure to be a hit. 
• Utilizing Avon's traditional soft, yet durable rubber compound, the new Diamond texture provides excellent grip ability, while reducing arm pump.
• The diameter of the grip, on the smaller side is excellent for riding with or without gloves.
• Ouster Diameter 1.5"
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHXSE, FLTRXSE
• Made in the USA
• Sold in Pairs

Email Tristana@browardmotorsports.com

"Air Ride For Your Hands!"

• The Avon Air Cushion Anodized grips feel great and are very functional too
• Manufactured in the USA with a special core bar that creates air pockets inside the grip body
• Dampen vibrations, help eliminate the tingle in your hands and soften the overall feel of the ride
• The soft serrated texture on the grip surface helps you hold on to your bike
• 6061 billet aluminum end caps and collars
• Outer Diameter 1.625"
• Sold in pairs
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHSXE, FLTRXSE

* Not for use with Excalibur, Gatlin, Rival, Castle, Deep Cut, Slots or Spiked grips

Email Tristana@browardmotorsports.com

"Air Ride For Your Hands!"

• The Avon Air Cushion Anodized grips feel great and are very functional too
• Manufactured in the USA with a special core bar that creates air pockets inside the grip body
• Dampen vibrations, help eliminate the tingle in your hands and soften the overall feel of the ride
• The soft serrated texture on the grip surface helps you hold on to your bike
• 6061 billet aluminum end caps and collars
• Outer Diameter 1.625"
• Sold in pairs
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHSXE, FLTRXSE

* Not for use with Excalibur, Gatlin, Rival, Castle, Deep Cut, Slots or Spiked grips

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

TIRE TABLE

* = Radial

Email Tristana@browardmotorsports.com

• The Air-SS incorporates an air cushion system that will reduce some of the unwanted vibrations
• Same grippy texture as the original Air Cushion grip
• Available in triple Chrome plated, or Black Anodized, Billet Aluminum ends
• Outer Diameter 1.50"
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHXSE, FLTRXSE
• Made in the USA
• Sold in pairs

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

• Velvet Air is a softer, vibration dampening grip that utilizes air pockets inside of the grip body  
• The smooth, "velvet like" surface of these grips makes for a very comfortable ride 
• Made with Kraton polymer, and finished off with billet aluminum end caps and collars
• OD 1.60"
• Twist Grip Sensor on 24 FLHX/SE, FLTRX/SE/STSE & 23 FLHXSE, FLTRXSE
• Made in the USA
• Sold in pairs.

Email Tristana@browardmotorsports.com

Handcrafted in the USA:

HeliBars® are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American Craftsmen and women, and are backed by a one year warranty on all materials and workmanship, as well as our 30 day money back guarantee if you are not completely satisfied.

Greater long distance comfort:

HeliBars® provides motorcyclists with better handling ergonomics and greater long distance comfort without distracting from riding excitement. HeliBars research & development engineers are riders like you, and they take meticulous care to address all of your handlebars' deficiencies before they design the perfect fix for your bike. When you buy HeliBars®, you are benefiting from years of experience in riding comfort and performance!

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

GIVI has ventured into the adventure touring market with the new Trekker series. These aluminum/polypropylene cases utilize the patented GIVI MONOKEY® system giving a lockable, waterproof and easily removable case option. The 33 and 46 liter GIVI TREKKER series are their newest adventure touring cases utilizing a unique full and partial lid opening system.  The spacious 52 liter top case does not sport the dual opening system but does allow the storage for two modular helmets where the other sizes do not.  Made from a combination of polypropylene and aluminum panels, the TREKKER series with its patented MONOKEY® latching system now offer the convenience of GIVI hard cases in a more rugged style for the adventure touring motorcycle rider.

• Volume: 33 Liter, 46 Liter, & 52 Liter
• Weight of cases lbs: 12.76, 12.76, & 12.76
• Color: Brushed Aluminum / Matte Black
• Construction: Polypropylene / Aluminum
• Max Load lbs: 22, 22, & 22
• Helmet capacity: N/A, 1 Helmet, 2 Helmets
• Stainless-steel thermal flask. It keeps liquids hot or cold for up to 12 hours.

Attention: Mounting hardware sold separately, see Mounting hardware application chart

(Foot Notes for bottom of pages)

‡ = Two part numbers required for fitment

§ = Two or Three part numbers required for fitment

Email Tristana@browardmotorsports.com

• The Tanklock system now offers the ultimate tank bag securing system alleviating the concerns of magnetic and strap down tank bags being applied to your fuel tank
• When combined with the appropriate make/model mounting hardware (tank ring) latches directly to the fuel filler housing quickly and efficiently
• Most of the Tanklock bag's lower mechanism can be adjusted forward and backwards to enable the Tanklock bag to mount easily and conveniently to most motorcycle models
• Note: Tanklock mounting hardware sold separately

• The TanklockED system enables a tanklock bag to be secured to the specific flange mounted to the fuel cap, using a security lock thus ensuring increased security
• The tanklock bag can be attached and detached from the fuel tank without using the key. The key is only used to secure the tanklock bag when the motorcycle is left unattended.
• The lock type used in the ED System can be matched to the security locks used in top and side cases, the trolley base and also the tool box by using one of the following lock sets; SL102 / SL103 or SL105.
• To be fitted in conjunction with the specific tanklock mounting hardware (sold separately)

• Features
  • Water-resistant zips
  • Reflective inserts
  • Rain cover in fluorescent material
  • Weatherproof internal compartment to store the rain cover
  • Additional protection against dampness
  • Removable tablet-holder
  • Cable port
  • Handle and shoulder-strap for easier transportation

Email Tristana@browardmotorsports.com

• The Tanklock system now offers the ultimate tank bag securing system alleviating the concerns of magnetic and strap down tank bags being applied to your fuel tank
• When combined with the appropriate make/model mounting hardware (tank ring) latches directly to the fuel filler housing quickly and efficiently
• Most of the Tanklock bag's lower mechanism can be adjusted forward and backwards to enable the Tanklock bag to mount easily and conveniently to most motorcycle models
• Note: Tanklock mounting hardware sold separately

• The TanklockED system enables a tanklock bag to be secured to the specific flange mounted to the fuel cap, using a security lock thus ensuring increased security
• The tanklock bag can be attached and detached from the fuel tank without using the key. The key is only used to secure the tanklock bag when the motorcycle is left unattended.
• The lock type used in the ED System can be matched to the security locks used in top and side cases, the trolley base and also the tool box by using one of the following lock sets; SL102 / SL103 or SL105.
• To be fitted in conjunction with the specific tanklock mounting hardware (sold separately)

• Features
  • Water-resistant zips
  • Reflective inserts
  • Rain cover in fluorescent material
  • Weatherproof internal compartment to store the rain cover
  • Additional protection against dampness
  • Removable tablet-holder
  • Cable port
  • Handle and shoulder-strap for easier transportation

Email Tristana@browardmotorsports.com

• The Tanklock system now offers the ultimate tank bag securing system alleviating the concerns of magnetic and strap down tank bags being applied to your fuel tank
• When combined with the appropriate make/model mounting hardware (tank ring) latches directly to the fuel filler housing quickly and efficiently
• Most of the Tanklock bag's lower mechanism can be adjusted forward and backwards to enable the Tanklock bag to mount easily and conveniently to most motorcycle models
• Note: Tanklock mounting hardware sold separately

• The TanklockED system enables a tanklock bag to be secured to the specific flange mounted to the fuel cap, using a security lock thus ensuring increased security
• The tanklock bag can be attached and detached from the fuel tank without using the key. The key is only used to secure the tanklock bag when the motorcycle is left unattended.
• The lock type used in the ED System can be matched to the security locks used in top and side cases, the trolley base and also the tool box by using one of the following lock sets; SL102 / SL103 or SL105.
• To be fitted in conjunction with the specific tanklock mounting hardware (sold separately)

• Features
  • Water-resistant zips
  • Reflective inserts
  • Rain cover in fluorescent material
  • Weatherproof internal compartment to store the rain cover
  • Additional protection against dampness
  • Removable tablet-holder
  • Cable port
  • Handle and shoulder-strap for easier transportation

Email Tristana@browardmotorsports.com

• The Tanklock system now offers the ultimate tank bag securing system alleviating the concerns of magnetic and strap down tank bags being applied to your fuel tank
• When combined with the appropriate make/model mounting hardware (tank ring) latches directly to the fuel filler housing quickly and efficiently
• Most of the Tanklock bag's lower mechanism can be adjusted forward and backwards to enable the Tanklock bag to mount easily and conveniently to most motorcycle models
• Note: Tanklock mounting hardware sold separately

• The TanklockED system enables a tanklock bag to be secured to the specific flange mounted to the fuel cap, using a security lock thus ensuring increased security
• The tanklock bag can be attached and detached from the fuel tank without using the key. The key is only used to secure the tanklock bag when the motorcycle is left unattended.
• The lock type used in the ED System can be matched to the security locks used in top and side cases, the trolley base and also the tool box by using one of the following lock sets; SL102 / SL103 or SL105.
• To be fitted in conjunction with the specific tanklock mounting hardware (sold separately)

• Features
  • Water-resistant zips
  • Reflective inserts
  • Rain cover in fluorescent material
  • Weatherproof internal compartment to store the rain cover
  • Additional protection against dampness
  • Removable tablet-holder
  • Cable port
  • Handle and shoulder-strap for easier transportation

Email Tristana@browardmotorsports.com

• The Tanklock system now offers the ultimate tank bag securing system alleviating the concerns of magnetic and strap down tank bags being applied to your fuel tank
• When combined with the appropriate make/model mounting hardware (tank ring) latches directly to the fuel filler housing quickly and efficiently
• Most of the Tanklock bag's lower mechanism can be adjusted forward and backwards to enable the Tanklock bag to mount easily and conveniently to most motorcycle models
• Note: Tanklock mounting hardware sold separately

• The TanklockED system enables a tanklock bag to be secured to the specific flange mounted to the fuel cap, using a security lock thus ensuring increased security
• The tanklock bag can be attached and detached from the fuel tank without using the key. The key is only used to secure the tanklock bag when the motorcycle is left unattended.
• The lock type used in the ED System can be matched to the security locks used in top and side cases, the trolley base and also the tool box by using one of the following lock sets; SL102 / SL103 or SL105.
• To be fitted in conjunction with the specific tanklock mounting hardware (sold separately)

• Features
  • Water-resistant zips
  • Reflective inserts
  • Rain cover in fluorescent material
  • Weatherproof internal compartment to store the rain cover
  • Additional protection against dampness
  • Removable tablet-holder
  • Cable port
  • Handle and shoulder-strap for easier transportation

Email Tristana@browardmotorsports.com