Alpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.

• ECE / DOT
• Carbon shell construction utilizes a highly advanced molding technology with a multi-composite combination
• Three layer composite combination
• Unique, patented, visor release system
• Patented A-Head fitting height and angle adjustment system
• Collarbone protection is an important design feature of the Supertech helmet shell base profile
• Multi-Directional Impact Protection System: MIPS
• Emergency Release System (ERS).
• Hydration system compatibility
• Included: helmet bag
• Adult Medium = 2.7lbs
   

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth Helmet is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort.

KEY FEATURES
This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth  Medium and Youth Large. The SM3  Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses. Youth Medium (YM) and Youth Large (YL) sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and  Then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts.  The Youth Small (YS) has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and  therefore they require a Dedicated helmet fit.
 

CONSTRUCTION
The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight.
The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Maximized ventilation and high levels of heat transfer exchange thanks to 10 inlets and seven exhaust ports. The visor has been designed to direct air into the
ports for enhanced airflow. Patented visor release system ensures the visor isreleased with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint. Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance. 
Soft textile chin strap is 25mm for optimal safety and rider comfort. 

Email Tristana@browardmotorsports.com

The SM3 Helmet is designed to set new standards in performance, safety, and comfort for off-road enthusiasts. Packed with cutting-edge technology and engineering innovations, it ensures an unparalleled riding experience. With the SM3 helmet, you can experience the perfect combination of safety, comfort, and performance. Ride confidently wherever the trail takes you.

Key Benefits:

• Global Safety Certification:
  Conforms to both DOT and ECE 2206 standards, ensuring safe use worldwide.

• Enhanced Neck Protection:
  The patented visor release system minimizes forces on the neck by releasing the visor with a precisely calibrated amount of force during impact.

• Superior Ventilation:
  Features 10 inlets and 7 exhaust ports for maximum airflow and effective heat transfer, keeping you cool during intense rides.

• Revolutionary Impact Technology:

  • Alpinestars' patented low-friction coating on the EPS liner reduces rotational acceleration forces from oblique impacts.
  • Mimics the brain’s natural defense system with a slip-plane layer for added protection.

• Lightweight, Durable Shell:
  Thermo-injected polymer blend with variable thickness delivers optimal impact protection without compromising on weight.

• Unmatched Comfort:
  Engineered for ease of use, offering a snug yet breathable fit for extended riding sessions.

Email Tristana@browardmotorsports.com

DESCRIPTION
The SM7 helmet is engineered for off-road racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection, in DOT/ECE certified.  As well as Alpinestars patented  A- Head Fitment and Visor Detaching Systems, the SM7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area. 

KEY FEATURES
The SM7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The shell’s curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the ll and referred to the neck and spinal column. Ultra ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation. The SM7 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical  solution for the wide variety of fit needs worldwide, providing three different helmet shell sizes M, L, and XL, and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly,  improves the effectiveness of the helmet in an impact. The SM7’s fit can be further customized via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes. Communication System Compatible: cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers. 

CONSTRUCTION
Linings are removable and washable by hand using warm water (max 30° Celsius) and neutral soap. Fabrics have antimicrobial treatments. Crown Pad: the Crown Pad and the Neck Pad are elastically connected, for better 
oblique impact management. Top Pad: the Top Pad is removable and adjustable in height thanks to the  A-head system. Cheek Pads: the Cheek Pads are fitted 3D foam, with an emergency extraction system (ERS), wita channel for hydration tube installation. Cheek pads are interchangeable among all sizes. Chinstrap: chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings,removable covers for washing purpose. The SM7 helmet fit can be customized to the User’s needs with Alpinestars genuine parts: cheek pads are available in different thicknesses for a truly optimized fit (all thicknesses are exchangeable among all sizes) Integrated channels on both sides to accommodate a hydration system.

PROTECTION
The SM7’s Visor Detaching System features a patented release mechanism is conceived  to avoid the inherent weaknesses in other  anchoring systems. The SM7’s visor is engineered to
automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction. PLASMA inside; Alpinestars patented
PLASMA technology is strategically-integrated into the SM7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.

Email Tristana@browardmotorsports.com

Alpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.

• ECE / DOT
• Carbon shell construction utilizes a highly advanced molding technology with a multi-composite combination
• Three layer composite combination
• Unique, patented, visor release system
• Patented A-Head fitting height and angle adjustment system
• Collarbone protection is an important design feature of the Supertech helmet shell base profile
• Multi-Directional Impact Protection System: MIPS
• Emergency Release System (ERS).
• Hydration system compatibility
• Included: helmet bag
• Adult Medium = 2.7lbs
   

Email Tristana@browardmotorsports.com

Alpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.

• ECE / DOT
• Carbon shell construction utilizes a highly advanced molding technology with a multi-composite combination
• Three layer composite combination
• Unique, patented, visor release system
• Patented A-Head fitting height and angle adjustment system
• Collarbone protection is an important design feature of the Supertech helmet shell base profile
• Multi-Directional Impact Protection System: MIPS
• Emergency Release System (ERS).
• Hydration system compatibility
• Included: helmet bag
• Adult Medium = 2.7lbs
   

Email Tristana@browardmotorsports.com

DESCRIPTION
The SM7 helmet is engineered for off-road racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection, in DOT/ECE certified.  As well as Alpinestars patented  A- Head Fitment and Visor Detaching Systems, the SM7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area. 

KEY FEATURES
The SM7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The shell’s curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the ll and referred to the neck and spinal column. Ultra ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation. The SM7 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical  solution for the wide variety of fit needs worldwide, providing three different helmet shell sizes M, L, and XL, and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly,  improves the effectiveness of the helmet in an impact. The SM7’s fit can be further customized via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes. Communication System Compatible: cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers. 

CONSTRUCTION
Linings are removable and washable by hand using warm water (max 30° Celsius) and neutral soap. Fabrics have antimicrobial treatments. Crown Pad: the Crown Pad and the Neck Pad are elastically connected, for better 
oblique impact management. Top Pad: the Top Pad is removable and adjustable in height thanks to the  A-head system. Cheek Pads: the Cheek Pads are fitted 3D foam, with an emergency extraction system (ERS), wita channel for hydration tube installation. Cheek pads are interchangeable among all sizes. Chinstrap: chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings,removable covers for washing purpose. The SM7 helmet fit can be customized to the User’s needs with Alpinestars genuine parts: cheek pads are available in different thicknesses for a truly optimized fit (all thicknesses are exchangeable among all sizes) Integrated channels on both sides to accommodate a hydration system.

PROTECTION
The SM7’s Visor Detaching System features a patented release mechanism is conceived  to avoid the inherent weaknesses in other  anchoring systems. The SM7’s visor is engineered to
automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction. PLASMA inside; Alpinestars patented
PLASMA technology is strategically-integrated into the SM7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.

Email Tristana@browardmotorsports.com

DESCRIPTION
The SM7 helmet is engineered for off-road racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection, in DOT/ECE certified.  As well as Alpinestars patented  A- Head Fitment and Visor Detaching Systems, the SM7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area. 

KEY FEATURES
The SM7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The shell’s curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the ll and referred to the neck and spinal column. Ultra ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation. The SM7 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical  solution for the wide variety of fit needs worldwide, providing three different helmet shell sizes M, L, and XL, and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly,  improves the effectiveness of the helmet in an impact. The SM7’s fit can be further customized via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes. Communication System Compatible: cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers. 

CONSTRUCTION
Linings are removable and washable by hand using warm water (max 30° Celsius) and neutral soap. Fabrics have antimicrobial treatments. Crown Pad: the Crown Pad and the Neck Pad are elastically connected, for better 
oblique impact management. Top Pad: the Top Pad is removable and adjustable in height thanks to the  A-head system. Cheek Pads: the Cheek Pads are fitted 3D foam, with an emergency extraction system (ERS), wita channel for hydration tube installation. Cheek pads are interchangeable among all sizes. Chinstrap: chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings,removable covers for washing purpose. The SM7 helmet fit can be customized to the User’s needs with Alpinestars genuine parts: cheek pads are available in different thicknesses for a truly optimized fit (all thicknesses are exchangeable among all sizes) Integrated channels on both sides to accommodate a hydration system.

PROTECTION
The SM7’s Visor Detaching System features a patented release mechanism is conceived  to avoid the inherent weaknesses in other  anchoring systems. The SM7’s visor is engineered to
automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction. PLASMA inside; Alpinestars patented
PLASMA technology is strategically-integrated into the SM7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.

Email Tristana@browardmotorsports.com

The SM3 Helmet is designed to set new standards in performance, safety, and comfort for off-road enthusiasts. Packed with cutting-edge technology and engineering innovations, it ensures an unparalleled riding experience. With the SM3 helmet, you can experience the perfect combination of safety, comfort, and performance. Ride confidently wherever the trail takes you.

Email Tristana@browardmotorsports.com

DESCRIPTION
The SM7 helmet is engineered for off-road racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection, in DOT/ECE certified.  As well as Alpinestars patented  A- Head Fitment and Visor Detaching Systems, the SM7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area. 

KEY FEATURES
The SM7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The shell’s curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the ll and referred to the neck and spinal column. Ultra ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation. The SM7 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical  solution for the wide variety of fit needs worldwide, providing three different helmet shell sizes M, L, and XL, and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly,  improves the effectiveness of the helmet in an impact. The SM7’s fit can be further customized via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes. Communication System Compatible: cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers. 

CONSTRUCTION
Linings are removable and washable by hand using warm water (max 30° Celsius) and neutral soap. Fabrics have antimicrobial treatments. Crown Pad: the Crown Pad and the Neck Pad are elastically connected, for better 
oblique impact management. Top Pad: the Top Pad is removable and adjustable in height thanks to the  A-head system. Cheek Pads: the Cheek Pads are fitted 3D foam, with an emergency extraction system (ERS), wita channel for hydration tube installation. Cheek pads are interchangeable among all sizes. Chinstrap: chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings,removable covers for washing purpose. The SM7 helmet fit can be customized to the User’s needs with Alpinestars genuine parts: cheek pads are available in different thicknesses for a truly optimized fit (all thicknesses are exchangeable among all sizes) Integrated channels on both sides to accommodate a hydration system.

PROTECTION
The SM7’s Visor Detaching System features a patented release mechanism is conceived  to avoid the inherent weaknesses in other  anchoring systems. The SM7’s visor is engineered to
automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction. PLASMA inside; Alpinestars patented
PLASMA technology is strategically-integrated into the SM7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.

Email Tristana@browardmotorsports.com

The SM3 Helmet is designed to set new standards in performance, safety, and comfort for off-road enthusiasts. Packed with cutting-edge technology and engineering innovations, it ensures an unparalleled riding experience. With the SM3 helmet, you can experience the perfect combination of safety, comfort, and performance. Ride confidently wherever the trail takes you.

Email Tristana@browardmotorsports.com

The SM3 Helmet is designed to set new standards in performance, safety, and comfort for off-road enthusiasts. Packed with cutting-edge technology and engineering innovations, it ensures an unparalleled riding experience. With the SM3 helmet, you can experience the perfect combination of safety, comfort, and performance. Ride confidently wherever the trail takes you.

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth Medium and Youth Large. The SM3 Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses. Youth Medium and Youth Large sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts. The Youth Small has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and therefore they require a dedicated helmet fit. Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping reduce overall weight. The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint. Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth Medium and Youth Large. The SM3 Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses. Youth Medium and Youth Large sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts. The Youth Small has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and therefore they require a dedicated helmet fit. Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping reduce overall weight. The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint. Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth Medium and Youth Large. The SM3 Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses. Youth Medium and Youth Large sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts. The Youth Small has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and therefore they require a dedicated helmet fit. Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping reduce overall weight. The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint. Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth Medium and Youth Large. The SM3 Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses. Youth Medium and Youth Large sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts. The Youth Small has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and therefore they require a dedicated helmet fit. Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping reduce overall weight. The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint. Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.

Email Tristana@browardmotorsports.com

Anatomically engineered and profiled specifically for youth and younger riders, the all-new SM3 Youth is optimized for MX, Enduro and Off-road use, and features a whole raft of technologies and innovations taken from Alpinestars range of adult helmets to deliver the optimal blend of performance, protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight. Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three sizes (Youth Small, Youth Medium and Youth Large. The SM3 Youth weighs 1060g (ECE) and 1170g (DOT). Separate versions of the shells for DOT and ECE requirements; the DOT certified version of the helmet’s inner shell is constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts. The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses. Youth Medium and Youth Large sizes share the same EPS size, which allows riders with an YM size to initially buy an YM helmet and then configure it to a Youth Large size as they grow via the crown and cheek pad spare parts. The Youth Small has a smaller EPS size and can be customized only via the cheek pads. Alpinestars extensive research has shown that the kids that wear a YS size are very small, typically 3 to 4 years old, and therefore they require a dedicated helmet fit. Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping reduce overall weight. The inner and outer surfaces are engineered to minimize the effects of oblique impacts. Alpinestars patented low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts. Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact. Comfort liner is constructed using recycled materials for a lower carbon footprint.

Email Tristana@browardmotorsports.com

• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.
• The visor has been designed to direct air into the ports for enhanced airflow.
• Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.
• The inner and outer surfaces are engineered to minimize the effects of oblique impacts.
• Side shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.
• Soft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.
• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption
• Emergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.
• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.
• Removable comfort liner with SILVERPLUS® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.
• Anti-microbial liner is removable and washable.
• Stainless steel D-rings to ensure a tight and secure fit.
• A size Medium weighs 1370g (DOT).
• The SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.
• Maximized ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.
   

Email Tristana@browardmotorsports.com

Alpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.

Email Tristana@browardmotorsports.com