• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Designed and pre-drilled to accommodate wiper kits (sold separately)
• High quality, scratch-resistant, DOT-approved glass
• Durable, powder-coated metal surround
• Wraps around and mounts securely to A-Pillars to create a no-gap seal
• Dual sliding vents increase in-cab air-flow
• Model-specific design with rubber gasket for seamless vehicle integration

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Heavy-duty 14-gauge thick steel panel construction
• Integrated visor for protection and accessory mounting
• Includes rubber seals between Roll Cage and roof to minimize noise and wear
• Quick and easy install in less than 30 minutes
• Compatible with Kolpin® Glass Windshields and select back panels
• Stiffening ribs added for select products

Email Tristana@browardmotorsports.com

• Durable cast Aluminum construction with protective rubber over-molding for a carrying solution that delivers maximum functionality and unparalleled strength
• Tilts 160° in 40° increments
• Rotates 360°, tool-free base rotation
• 5-Position tooth-indexed tool-free tilt-angling with infinite rotation
• (2) Heavy-duty rubber straps, hardware and mounting plates included
• 50+ lbs. of carrying strength for your heavy-duty gear.
• Universal Mount has 4-corner bolting system
• Sold as a pair

Email Tristana@browardmotorsports.com

 GEAR GRIPS 

• Easy one hand operation
• Ratchet design provides a custom fit for any size or shape object
• Push button release for quick removal
• Rubberized, textured grip holds gear securely in place
• Universal fit

 RATCHETING RHINO GRIPS

• Soft cross pattern rubber grips provide increased cushioning and gripping power for items in a variety of shapes and sizes
• Heavy duty design carries guns, bows, fishing poles, ice augers, shovels,. Rakes, farm tools, etc.
• Kwik clip design for on/off rotational in field adjustments
• Quick release button opens the grip quickly for easy access to gear
• Ratcheting design allows for securing items from 1-4” diameter

 RHINO GRIP - SINGLE/DOUBLE 

• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Single Grip option offers off-set mounting capability leaving plenty of room on the ATV rack for your other gear
• Mounts on any horizontal or vertical surface – ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

RHINO GRIP XL - SINGLE/DOUBLE

• The only gear grips that feature a 360° rotating and multi-angle design adjustable without tools!
• Multi mount base allows for rotation of the grip 360°
• Flexible grips are adjustable, able to tilt from 45° to 90°
• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Mounts to any horizontal or vertical surface - ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

Email Tristana@browardmotorsports.com

 GEAR GRIPS 

• Easy one hand operation
• Ratchet design provides a custom fit for any size or shape object
• Push button release for quick removal
• Rubberized, textured grip holds gear securely in place
• Universal fit

 RATCHETING RHINO GRIPS

• Soft cross pattern rubber grips provide increased cushioning and gripping power for items in a variety of shapes and sizes
• Heavy duty design carries guns, bows, fishing poles, ice augers, shovels,. Rakes, farm tools, etc.
• Kwik clip design for on/off rotational in field adjustments
• Quick release button opens the grip quickly for easy access to gear
• Ratcheting design allows for securing items from 1-4” diameter

 RHINO GRIP - SINGLE/DOUBLE 

• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Single Grip option offers off-set mounting capability leaving plenty of room on the ATV rack for your other gear
• Mounts on any horizontal or vertical surface – ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

RHINO GRIP XL - SINGLE/DOUBLE

• The only gear grips that feature a 360° rotating and multi-angle design adjustable without tools!
• Multi mount base allows for rotation of the grip 360°
• Flexible grips are adjustable, able to tilt from 45° to 90°
• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Mounts to any horizontal or vertical surface - ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

Email Tristana@browardmotorsports.com

 GEAR GRIPS 

• Easy one hand operation
• Ratchet design provides a custom fit for any size or shape object
• Push button release for quick removal
• Rubberized, textured grip holds gear securely in place
• Universal fit

 RATCHETING RHINO GRIPS

• Soft cross pattern rubber grips provide increased cushioning and gripping power for items in a variety of shapes and sizes
• Heavy duty design carries guns, bows, fishing poles, ice augers, shovels,. Rakes, farm tools, etc.
• Kwik clip design for on/off rotational in field adjustments
• Quick release button opens the grip quickly for easy access to gear
• Ratcheting design allows for securing items from 1-4” diameter

 RHINO GRIP - SINGLE/DOUBLE 

• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Single Grip option offers off-set mounting capability leaving plenty of room on the ATV rack for your other gear
• Mounts on any horizontal or vertical surface – ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

RHINO GRIP XL - SINGLE/DOUBLE

• The only gear grips that feature a 360° rotating and multi-angle design adjustable without tools!
• Multi mount base allows for rotation of the grip 360°
• Flexible grips are adjustable, able to tilt from 45° to 90°
• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Mounts to any horizontal or vertical surface - ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

Email Tristana@browardmotorsports.com

 GEAR GRIPS 

• Easy one hand operation
• Ratchet design provides a custom fit for any size or shape object
• Push button release for quick removal
• Rubberized, textured grip holds gear securely in place
• Universal fit

 RATCHETING RHINO GRIPS

• Soft cross pattern rubber grips provide increased cushioning and gripping power for items in a variety of shapes and sizes
• Heavy duty design carries guns, bows, fishing poles, ice augers, shovels,. Rakes, farm tools, etc.
• Kwik clip design for on/off rotational in field adjustments
• Quick release button opens the grip quickly for easy access to gear
• Ratcheting design allows for securing items from 1-4” diameter

 RHINO GRIP - SINGLE/DOUBLE 

• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Single Grip option offers off-set mounting capability leaving plenty of room on the ATV rack for your other gear
• Mounts on any horizontal or vertical surface – ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

RHINO GRIP XL - SINGLE/DOUBLE

• The only gear grips that feature a 360° rotating and multi-angle design adjustable without tools!
• Multi mount base allows for rotation of the grip 360°
• Flexible grips are adjustable, able to tilt from 45° to 90°
• Heavy-duty design carries guns, bows, fishing poles, shovels, farm tools, etc.
• Durable, flexible grips cushion and protect while providing a custom fit to a variety of sizes and shapes
• Mounts to any horizontal or vertical surface - ATV racks, hard boxes, garage walls, truck beds, just about anywhere!

Email Tristana@browardmotorsports.com

• Semi-rigid internal core construction with zipperless design
• Water-resistant ballistic fabrics
• (6) quick-release buckle mounting straps for universal fitment to most ATVs and UTVs
• (6) metal d-ring tie-downs on perimeter for various mounting options
• Integrated dust and water seal
• Additional main compartment divider
• Zippered exterior pocket
• 3-pocket lid organizer

Email Tristana@browardmotorsports.com

• Divided interior pocket fits (2) scoped-rifles or shotguns up to 52” in length
• Water/dust-resistant ballistic fabrics & zippers
• Thick padded construction
• (2) large exterior gear storage pockets
• (6) quick-release buckle mounting straps for universal fitment to UTV roll cages
• Quickly removable from UTV for use as carrying case
• Available in Black and Mossy Oak® Break-up®
• Color: Black

Email Tristana@browardmotorsports.com

• Water-resistant ballistic fabric & zippers, and padded construction
• 20 Liter cooler integrated in center compartment
• (2) 18 Liter side gear storage compartments
• Padded seat converts to additional storage basket
• (2) quick-access mesh pockets
• (7) quick-release buckle mounting straps for universal fitment to most ATV racks
• Zippered rear convenience pocket for small items
• Dimensions: 34” L x 18” W x 11” H
• Available in Black or Mossy Oak® Break-Up®
• Color: Mossy Oak® Break-Up®

Email Tristana@browardmotorsports.com

• Massive 31 Gallon (117 Liter) storage capacity. Fits 2 Full-Size adult helmets
• Seamless hinge and gutter design keeps inside dry and dust free
• Durable roto-molded construction
• Heavy-duty rubber draw latches
• Integrated padlock holes
• Rugged mounting tie-downs for added mounting flexibility
• Dual cup holders
• U-bolt Mounting kit included
• Removeable no-slip seat pads
• Made in the USA with global materials
• Dimensions: 40.75” L x 28” W x 17” H

Email Tristana@browardmotorsports.com

This secure, dependable mount cradles two Kolpin Gun Boot 6.0’s (Not Included) for the ultimate in safe firearm transportation in the bed of your UTV. Just slip your Gun Boot 6.0 case into the mount for a snug ride over even the roughest terrain. The in-bed mounting location does not interfere with rear visibility and the compact design still leaves plenty of bed space to haul your other essential gear.

Email Tristana@browardmotorsports.com

• Engineered steel bracket for precision angling and attachment to vehicles
• Spring loaded latch with stainless steel spring
• Durable glass-reinforced nylon auto-latch construction

Email Tristana@browardmotorsports.com

• Engineered steel bracket for precision angling and attachment to vehicles
• Spring loaded latch with stainless steel spring
• Durable glass-reinforced nylon auto-latch construction

Email Tristana@browardmotorsports.com

• Engineered steel bracket for precision angling and attachment to vehicles
• Spring loaded latch with stainless steel spring
• Durable glass-reinforced nylon auto-latch construction

Email Tristana@browardmotorsports.com

• Gun Boot® IV case convenience with Gun Boot® III case type mount!
• Provides ample room for 50mm scope and even rifles with slings attached or shotguns up to 51" in length
• Includes Gun Boot® case with removable foam Impact liner and bracket
• Designed to accommodate left and right hand bolt action rifles and shotgun
• Ergonomically designed handle and molded attachment points for a sling
• Installs quickly and easily
• Mounts to most ATV tubular ATV racks & UTV Roll Bars using included adjustable-angle mounting bracket and hardware
• Made in the USA

Email Tristana@browardmotorsports.com

• Largest interior of all Kolpin Gun Boot® cases
• Single-handed entry, hinged lid for quick access to your firearm
• Integrated rubber closure strap
• Lockable to Kolpin Stronghold® Auto-latch mounts and access door
• Removable zippered foam liner
• Integrated carrying handle and integrated feet
• Meets TSA guidelines for air travel
• Mount to your ATV or UTV with mounting bracket (sold separately)
• Made in the USA

Email Tristana@browardmotorsports.com

• Secures virtually all firearms up to 51" in length, including attached bi-pods and scopes
• Extra room for pistol grips & small bi-pods
• Hinged hatchback with snap close cover, quick-pin and locking capability
• Ergonomically designed handle and molded attachment points for a sling
• Compatible with all mounting brackets (Sold Separately)
• Includes a removable foam Impact liner that provides superior interior protection
• Dimensions: 51" L x 4-1/2" W x 9" H
• Able to fit on your UTV with our Utility Gear Rail System.

Email Tristana@browardmotorsports.com

• In-cab overhead rack secures and protects (2) guns or (1) bow
• Adjustable firearm grips can be positioned to optimize firearm location and orientation
• Rubber strap provides quick, adjustable and silent access to firearms or bow
• Scratch-resistant foam-lined grips with rubber straps provide secure protection for exposed firearms, firearms encased in soft-sided cases or compound bows.
• Ultra-strong steel telescoping tubes adjust from 17.5”-33.5”
• Install in minutes without vehicle modification
• Fits UTVs with 1.5”-2.0” round cages as well as profile tube (Polaris®, Can-AM®)

Email Tristana@browardmotorsports.com

• Includes all the tools to fix an ATV/UTV Flat:
  - Pump with air hose - NO CO₂ needed!
  - Rasp
  - Rubber tire cement
  - Repair needle
  - (5) tire plugs
• Tools are conveniently secured inside the pump for storage
• Compact design for easy transport
• Easily straps to ATV/UTV racks or stores inside gear box
• Dimensions: 9-1/2” L x 3” diameter

Shipping Specifications

Email Tristana@browardmotorsports.com

• Eliminates thumb fatigue without changing the mechanical function of the throttle
• For ATV’s, watercraft and snowmobiles with a standard 7/8” handlebar and a thumb throttle
• Fast, easy installation
• Made of high quality, UV resistant reinforced plastic that withstands extreme temperatures

Email Tristana@browardmotorsports.com

• Fully adjustable 4" mirror
• Easily mounts to handle bars or tubular racks (hardware included)
• Quick attach/detach mounting base (which is interchangeable with Kolpin Rhino Grip XL)
• Accommodates 5/8” to 1” diameter tubing for positioning on ATV racks or handlebar
• Kwik-clip allows for easy positioning and removal

Email Tristana@browardmotorsports.com

• Side Mirror:
• Dual-view lenses for wide viewing range
• Rugged fold-in and break-away design
• Included clamps fit 1.625" - 2" round tubing and Polaris® and Can-Am® profile tubes
• Low-Profile clamp compatible with most windshields and doors
• Package includes a set of two mirrors (Passenger and driver side)
• Mirror Dimensions: 3.5” W x 10” H

• Rear Mirror
• Includes clamp and hardware to universally fit UTVs with 1-.625” - 2” round tubing
• Ball socket joints for unlimited viewing angles and easy, tool less dual pivot adjustment
• Wide angle convex lens provides wide viewing range and image stabilization
• Safety-glass mirror lens with high-impact durable nylon housing
• Mirror dimensions: 10” L x 3-1/2"H.

Email Tristana@browardmotorsports.com

• Side Mirror:
• Dual-view lenses for wide viewing range
• Rugged fold-in and break-away design
• Included clamps fit 1.625" - 2" round tubing and Polaris® and Can-Am® profile tubes
• Low-Profile clamp compatible with most windshields and doors
• Package includes a set of two mirrors (Passenger and driver side)
• Mirror Dimensions: 3.5” W x 10” H

• Rear Mirror
• Includes clamp and hardware to universally fit UTVs with 1-.625” - 2” round tubing
• Ball socket joints for unlimited viewing angles and easy, tool less dual pivot adjustment
• Wide angle convex lens provides wide viewing range and image stabilization
• Safety-glass mirror lens with high-impact durable nylon housing
• Mirror dimensions: 10” L x 3-1/2"H.

Email Tristana@browardmotorsports.com

• Universal design fits most ATVs or UTVs with a four-stroke engine
• Engineered with an innovative high flow/low restriction muffler
• Quiets ATV/UTV exhaust noise up to 50% with no loss of performance!
• Dyno test results, on some models, have actually revealed an increase in mid-range power and overall performance
• All mounting hardware and detailed instructions included
• Baffled design has no packing to burn out, steel construction for long lasting performance

HONDA and UNIVERSAL BOLT-ON ADAPTER

• Fits Honda TRX 250, 300, 350, 400, 450 and Universal for other flat or concave OEM Muffler Outlets
• Includes gasket and self-tapping screws

Email Tristana@browardmotorsports.com

• Universal design fits most ATVs or UTVs with a four-stroke engine
• Engineered with an innovative high flow/low restriction muffler
• Quiets ATV/UTV exhaust noise up to 50% with no loss of performance!
• Dyno test results, on some models, have actually revealed an increase in mid-range power and overall performance
• All mounting hardware and detailed instructions included
• Baffled design has no packing to burn out, steel construction for long lasting performance

HONDA and UNIVERSAL BOLT-ON ADAPTER

• Fits Honda TRX 250, 300, 350, 400, 450 and Universal for other flat or concave OEM Muffler Outlets
• Includes gasket and self-tapping screws

Email Tristana@browardmotorsports.com

• Easily access necessary gear
• Features a weather resistant storage compartment with lid & two cup holders
• Heavy-duty, black roto-molded, and uv-stabilized LLDPE (linear low-density polyethylene) construction
• Overall Dimensions: 21” L x 10” W x 8” H
• Made in the USA

Email Tristana@browardmotorsports.com

• Can fit up to 2 adult helmets or other large items
• Mounts by 4 U-bolts with sealing washers
• Provides nearly 3.5 cubic feet of weather resistant storage

Email Tristana@browardmotorsports.com

• Easy installation to Polaris® Ranger bed rails using the Polaris® Lock & Ride® locations
• (2) Kolpin KXP plungers included
• Lockable latch
• Provides 1.1 cu ft of weather resistant storage
• Dimensions : 22" L x 12.25" W x 12.50" H

Email Tristana@browardmotorsports.com

FRONT and REAR TRAIL BOX

FRONT BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 30.25" L x 13.5" W x 8.8" H

REAR BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity allows for extra weight of the optional accessory rack sold separately
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 37" L x 17.3" W x 13.6" H

ACCESSORY RACK

• Designed to be used with Kolpin Rear Trail Box sold separately
• Heavy duty 1/2" tubular steel construction
• Threaded tubular ends allow for easy mounting on molded box lids
• Dimensions 26" L x 8.5" W
• Rack shown installed on rear box

KXP MOUNTING KITS

FRONT

• Brackets securely mount Front Trail Box to Polaris® front composite ATV racks using the Polaris® Lock & Ride® System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers and all hardware
• Quick & easy attachment/removal of your Front Trail Box
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Front Trail Box  (sold separately)
• Compatible with Polaris® ATV composite front racks using the Polaris® Lock & Ride® System only

REAR

• Brackets securely mount Rear Trail Box  to the rear composite rack of your Polaris ATV using the Polaris Lock & Ride System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers, (2) Kwik Cinch Straps and all hardware
• Quick & easy attachment/removal of your Rear Trail Box
• Included Kwik Cinch straps provide additional security without drilling your OEM rack
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Rear Trail Box (sold separately)
• Compatible with Polaris® composite ATV rear racks using the Polaris® Lock & Ride® System only

Email Tristana@browardmotorsports.com

FRONT and REAR TRAIL BOX

FRONT BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 30.25" L x 13.5" W x 8.8" H

REAR BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity allows for extra weight of the optional accessory rack sold separately
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 37" L x 17.3" W x 13.6" H

ACCESSORY RACK

• Designed to be used with Kolpin Rear Trail Box sold separately
• Heavy duty 1/2" tubular steel construction
• Threaded tubular ends allow for easy mounting on molded box lids
• Dimensions 26" L x 8.5" W
• Rack shown installed on rear box

KXP MOUNTING KITS

FRONT

• Brackets securely mount Front Trail Box to Polaris® front composite ATV racks using the Polaris® Lock & Ride® System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers and all hardware
• Quick & easy attachment/removal of your Front Trail Box
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Front Trail Box  (sold separately)
• Compatible with Polaris® ATV composite front racks using the Polaris® Lock & Ride® System only

REAR

• Brackets securely mount Rear Trail Box  to the rear composite rack of your Polaris ATV using the Polaris Lock & Ride System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers, (2) Kwik Cinch Straps and all hardware
• Quick & easy attachment/removal of your Rear Trail Box
• Included Kwik Cinch straps provide additional security without drilling your OEM rack
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Rear Trail Box (sold separately)
• Compatible with Polaris® composite ATV rear racks using the Polaris® Lock & Ride® System only

Email Tristana@browardmotorsports.com

• Largest hard-sided storage box offered by Kolpin
• Easily accommodates 4 Adult-sized helmets and more
• Kwik-Cinch straps for quick on/off attachment to most tubular ATV racks. (4) U-bolts & sealing washers also included for enhanced mounting
• Lid has molded-in tray & double-wall construction for extra storage capacity & rigidity allows for extra weight of the accessory rack
• Metal accessory rack for increase load carrying capacity
• Lockable, heavy-duty keyed latch
• 41 gallons (156 L) of weather-resistant storage
• Dimensions: 42.5" L x 21.5" W x 16.75" H

Email Tristana@browardmotorsports.com

• Largest hard-sided storage box offered by Kolpin
• Easily accommodates 4 Adult-sized helmets and more
• Kwik-Cinch straps for quick on/off attachment to most tubular ATV racks. (4) U-bolts & sealing washers also included for enhanced mounting
• Lid has molded-in tray & double-wall construction for extra storage capacity & rigidity allows for extra weight of the accessory rack
• Metal accessory rack for increase load carrying capacity
• Lockable, heavy-duty keyed latch
• 41 gallons (156 L) of weather-resistant storage
• Dimensions: 42.5" L x 21.5" W x 16.75" H

Email Tristana@browardmotorsports.com

FRONT and REAR TRAIL BOX

FRONT BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 30.25" L x 13.5" W x 8.8" H

REAR BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity allows for extra weight of the optional accessory rack sold separately
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 37" L x 17.3" W x 13.6" H

ACCESSORY RACK

• Designed to be used with Kolpin Rear Trail Box sold separately
• Heavy duty 1/2" tubular steel construction
• Threaded tubular ends allow for easy mounting on molded box lids
• Dimensions 26" L x 8.5" W
• Rack shown installed on rear box

KXP MOUNTING KITS

FRONT

• Brackets securely mount Front Trail Box to Polaris® front composite ATV racks using the Polaris® Lock & Ride® System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers and all hardware
• Quick & easy attachment/removal of your Front Trail Box
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Front Trail Box  (sold separately)
• Compatible with Polaris® ATV composite front racks using the Polaris® Lock & Ride® System only

REAR

• Brackets securely mount Rear Trail Box  to the rear composite rack of your Polaris ATV using the Polaris Lock & Ride System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers, (2) Kwik Cinch Straps and all hardware
• Quick & easy attachment/removal of your Rear Trail Box
• Included Kwik Cinch straps provide additional security without drilling your OEM rack
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Rear Trail Box (sold separately)
• Compatible with Polaris® composite ATV rear racks using the Polaris® Lock & Ride® System only

Email Tristana@browardmotorsports.com

FRONT and REAR TRAIL BOX

FRONT BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 30.25" L x 13.5" W x 8.8" H

REAR BOX

• Contoured design allows for maximum sight reduction while operating ATV
• Great storage for supplies and equipment
• Double wall lid construction for added rigidity allows for extra weight of the optional accessory rack sold separately
• Roto-moulded UV-stabilized LLDPE (linear low-density polyethylene) construction
• Separate heavy duty keyed lockable center latch
• Dimensions 37" L x 17.3" W x 13.6" H

ACCESSORY RACK

• Designed to be used with Kolpin Rear Trail Box sold separately
• Heavy duty 1/2" tubular steel construction
• Threaded tubular ends allow for easy mounting on molded box lids
• Dimensions 26" L x 8.5" W
• Rack shown installed on rear box

KXP MOUNTING KITS

FRONT

• Brackets securely mount Front Trail Box to Polaris® front composite ATV racks using the Polaris® Lock & Ride® System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers and all hardware
• Quick & easy attachment/removal of your Front Trail Box
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Front Trail Box  (sold separately)
• Compatible with Polaris® ATV composite front racks using the Polaris® Lock & Ride® System only

REAR

• Brackets securely mount Rear Trail Box  to the rear composite rack of your Polaris ATV using the Polaris Lock & Ride System
• Mount kit includes (2) mounting brackets and (2) KXP ATV Plungers, (2) Kwik Cinch Straps and all hardware
• Quick & easy attachment/removal of your Rear Trail Box
• Included Kwik Cinch straps provide additional security without drilling your OEM rack
• Custom design mounting brackets incorporate KXP mounting system
• Only fits the Kolpin® Rear Trail Box (sold separately)
• Compatible with Polaris® composite ATV rear racks using the Polaris® Lock & Ride® System only

Email Tristana@browardmotorsports.com

• Extra large, reinforced opening
• Plush fleece lining to keep hands warm
• Durable Rhino plate front panel for abrasion resistance

Email Tristana@browardmotorsports.com

• Extra large, reinforced opening
• Plush fleece lining to keep hands warm
• Durable Rhino plate front panel for abrasion resistance

Email Tristana@browardmotorsports.com

• Center removable cooler features matrix grid interior to securely hold drinks
• Unique design features a built-in padded resting seat for added comfort
• Includes two removable gear bags with gusseted wet/dry compartments and water bottle pockets
• Water and dirt repellent Hydro ShieldTM exterior
• Rhino ArmorTM reinforcement in critical wear areas for extra durability
• Web reinforced buckle attachments secure to any ATV rack
• Side pocket zippers feature protective mud flaps for easy clean up
• Dimensions: 32” x 22” x 11”

Email Tristana@browardmotorsports.com

TRAILTEC RACK PAD

• 600x600D poly/pvc fabric
• 7 Velcro straps for easy attachment to ATV racks
• 3" open cell foam for riding comfort
• ½" closed cell foam on base for shock absorption
• Great pad for dogs, sporting events, fishing boats etc
• Reduces shock and discomfort from ATV racks
• Easily folds in half for storage or to double the cushioning effect
• 36" L x15" W x3" H

Email Tristana@browardmotorsports.com

THROTTLE MASTER

• Eliminate fatigued or sore thumbs
• More precise throttle control
• Easy universal bolt on design
• form fitted extension adjusts to individual preference

Email Tristana@browardmotorsports.com

• Heavy duty black powder-coated metal bracket is designed to hold any model of chainsaw to an ATV
• Holds any length and/or width chainsaw bar
• Bracket is designed to support the weight of the chainsaw engine on the top flat plate
• Adjustable up or down and 45 degrees left or right
• Chainsaw bar cover is suggested

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com

Seat Cover

• Fits most ATV’s up to 500cc models
• Rugged 600 denier nylon for long wear
• Elastic sure fit design

XL Seat Cover

• Protect your OEM seat with a water-resistant full wrap style seat cover
• Includes fitment for Can-Am Outlander & Polaris Sportsman 850/1000 Seats
• Abrasion and water-resistant synthetic rubber for extended product life
• (2) Buckles to tightly sinch and secure to OEM seat
• Up to 10" front x 20" back x 34" long

Email Tristana@browardmotorsports.com