WPS OFF-ROAD

NON-PIVOT RISER BLOCK 3" POL PRO TAPER MODELS | 45491

44-8303

$52.50

Designed for Polaris models with Pro Taper handlebars and one piece top clamp
Includes mounting bolts and nuts, use stock top clamp
Extended brake line / throttle cable may be required depending on handlebar and riser height

Email Tristana@browardmotorsports.com

NON-PIVOT RISER BLOCK 3" POL PRO TAPER MODELS | 45491

Wide Pivoting Riser

44-83433

$85.00

Durable lightweight design
Mounting hardware included for a direct OEM replacement
Designed with cut outs for routing cables and wires
Anodized for corrosion resistance
Wide Risers will fit any 4 - 4.5" wide T-style post
Narrow Risers will fit any 3 - 3.5" wide T-style post including Ski Doo Gen4
Wide Risers will also convert flat top style posts when used with a PowerMadd Pivot Adapter Kit
Narrow risers will not work with the PowerMadd Pivot Adapter Kit
Extended brake and throttle lines may be required for risers over 2" taller than stock

Email Tristana@browardmotorsports.com

Narrow Pivoting Riser

44-83070

$85.00

Durable lightweight design
Mounting hardware included for a direct OEM replacement
Designed with cut outs for routing cables and wires
Anodized for corrosion resistance
Wide Risers will fit any 4 - 4.5" wide T-style post
Narrow Risers will fit any 3 - 3.5" wide T-style post including Ski Doo Gen4
Wide Risers will also convert flat top style posts when used with a PowerMadd Pivot Adapter Kit
Narrow risers will not work with the PowerMadd Pivot Adapter Kit
Extended brake and throttle lines may be required for risers over 2" taller than stock

Email Tristana@browardmotorsports.com

FAT BAR ADAPTER

44-8340

$70.00

Universal fat bar adaptor allows 1-1/8” bars to be clamped to snowmobiles with Powermadd pivot riser blocks

Email Tristana@browardmotorsports.com

Universal Riser Block

44-8331

$55.00

For use only with Powermadd universal pivot adapter # 44-8330
Provides additional height to raise handlebars

Email Tristana@browardmotorsports.com

3" UNIVERSAL PIVOT RISER ADAPTER

44-8330

$110.00

Converts flat style steering post to a pivot style
Works on all brands of snowmobiles with flat steering post
Raises bars 3” and can be used without additional riser blocks
Works with Powermadd universal riser blocks, listed below, for additional bar heights taller than the 3” that the adapters provides
Extended length throttle cable/ throttle cable extension and extended brake lines may be required for installation

Email Tristana@browardmotorsports.com

NON-PIVOT RISER BLOCK 1"

44-8327

$25.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

NON-PIVOT RISER BLOCK 4"

44-8326

$50.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 4" YAM

44-8324

$50.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 4" S-D

44-8323

$50.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 4" A/C-POL

44-8322

$50.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 3" A/C '00-

44-8321

$45.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 3" YAM

44-8320

$45.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 3" S-D

44-8319

$45.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 3" A/C-POL

44-8318

$45.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 2" A/C '00-

44-8317

$40.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 2" YAM

44-8316

$40.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

PM S/M RISER BLOCK 2" S-D

44-8315

$40.00

Extruded 6061-T6 aluminum comes complete with hardware and installs in minutes
No extra adapters needed
Most snowmobiles will accept a 2” riser block without modifications to cables or wiring.
Fits flat style steering posts

NOTE: Newer Polaris models with recessed bolts in clamp require WPS P/N 44-8337

Email Tristana@browardmotorsports.com

Adjustable Height Pivot Riser

44-8301

$210.00

Mounts to any t-style steering post, wide or narrow
Designed for standard 7/8" handlebars, fat bar adapter required for taper style handlebars
Can use any type of t-post adapter for converting flat top steering posts
Works great in lower position for trail riding, taller position for boondocking and stand-up riding style
Locking assembly requires no tools for adjusting height on trail
If rising bars more than 2 inches over stock, throttle cable and brake lines may need to be extended

Email Tristana@browardmotorsports.com

POWER RISER 7/8" 2"X3.25"

18-95124

$85.00

Fits snowmobiles with 7/8" handlebar clamps
One piece design made from solid aluminum for superior strength
Dual pivot points
If raising more than 2" above stock, throttle cable and brake line extension may be required
NOTE: Requires separate bar clamps, if your upper or lower stock bar clamp is a one piece design, you will need a handlebar clamp kit, See Page 000 (2015 pg# 641)

Email Tristana@browardmotorsports.com

UNLOCK 10% OFF