•     The most advanced variable rate throttle in the world
•     Innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference
•     Ultra-compact housing with snap-together elbows make it easy to install and change reels
•     New sleek design requires less handlebar space for lever clearance and throttle position
•     Use smaller reels for slower throttle rate and larger reels for faster throttle rate
•     Included cam reel provides progressive throttle response preferred by some riders
•     Unique reel design allows fast reel changes
•     Cable boot keeps dirt and dust out for reliable and smooth operation
•     Billet aluminum inline cable adjusters for easy installation and adjustment
•     Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
•     Upper section of cables use 6 mm housing to provide solid support of adjusters
•     Simple to install and maintain
•     Designed by Motion Pro
•     Patent pending
• Kit includes:
•     Rev2™ throttle assembly with throttle tube (MX/Off-Road kits include Titan™ Throttle Tube)
•     Motion Pro Rev2™ black vinyl cables specifically designed for your bike
•     MX/Off-Road kits include Motion Pro DirtControl™ grips
•     Standard interchangeable reels: 35mm, 40 mm, 45 mm, 50 mm
•     Cam reel (Offroad kits include MX/Off-Road cam reel)

Email Tristana@browardmotorsports.com

• Completely redesigned and improved edition of the popular Motion Pro Vortex™ throttle
• New lighter, ultra-compact design maximizes handlebar space
• POM pulley with brass bearing for smooth feel and extended wear resistance
• Now includes super tough Motion Pro Titan Throttle Tube™
• Die cast aluminum construction with billet aluminum cover
• Smooth painted black finish
• Compatible with Motion Pro DirtControl™ V2 and ODI V2 Lock-On grips using cam ‘C’
• Fits 7/8" (22 mm) bars 
• Replaces OEM throttle on many Japanese 2-stroke MX bikes
• Fits RM125/250 95-05, YZ125 & 250 96-10, & WR250Z 97 with the stock throttle cables
• Special application Motion Pro cables available for use on many other bikes
• Fast twist rate opens throttle at 0.526 mm of cable pull per degree of rotation
• Will open carb to full throttle on most 2-stroke bikes in just 70 degrees of rotation
• Will pull 50 mm at maximum twist of 95 degrees

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Non-marring clamp-on design requires no modification of fork cap
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs
• Compatible with Motion Pro Micro Bleeder set

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Designed to fit motorcycles with 49 mm Showa forks
• For use with Showa 49 mm fork caps featuring the tall compression adjuster height
• Non-marring clamp-on design requires no modification of fork cap
• Requires 12 mm handlebar clearance above top of fork cap
• Compatible with Motion Pro Micro Bleeder Set
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs

Email Tristana@browardmotorsports.com

• Provides easy adjustment of compression damping without tools
• Designed to fit motorcycles with 49 mm Showa forks
• For use with Showa 49 mm fork caps featuring the short compression adjuster height
• Non-marring clamp-on design requires no modification of fork cap
• Requires 12 mm handlebar clearance above top of fork cap
• Compatible with Motion Pro Micro Bleeder Set
• Anodized billet 6061 aluminum construction
• Kit includes complete set to fit both fork legs 

Email Tristana@browardmotorsports.com

• Available in 12mm/13mm & 12mm/14mm
• Forged steel with satin chrome finish is ultra strong and durable
• Sis point box ends maximize surface contact and reduce risk of damaging sprocket nuts
• Offset design and long arms provides clearance over sprocket and protects hands
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Attractive stainless steel weave casing over coil wound housing
• Clear Armor Coat cover protects chrome and painted surfaces
• LW (longitudinally-wound) housing resists compression under heavy loads to deliver a precise, positive, non-mushy feel for enhanced performance
• Premium chrome fittings
• PE liner for durability and smoothness

Email Tristana@browardmotorsports.com

• Attractive stainless steel weave casing over coil wound housing
• Clear Armor Coat cover protects chrome and painted surfaces
• LW (longitudinally-wound) housing resists compression under heavy loads to deliver a precise, positive, non-mushy feel for enhanced performance
• Premium chrome fittings
• PE liner for durability and smoothness

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on `18 & later Softails & `21 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium chrome fittings
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on 2018 and later Softails and 2021 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium fittings with black finish enhance the look of blacked-out bikes
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

- Replaces the top half of the clutch cable assembly on 2018 and later Softails and 2021 and later Touring
- Innovative design eliminates the unreliable plastic junction box parts and spring mechanism on OEM cables
- Elimination of plastic components provides improved feel, precision, and rigidity
- Junction box and cover are machined from 6061-T6 aluminum with high quality black anodized finish
- Threaded adjuster provides precise and reliable cable adjustment
- Premium fittings with black finish enhance the look of blacked-out bikes
- POM liner provides smoothness and reliability
- Longitudinally-wound black housing resists compression
 

Email Tristana@browardmotorsports.com

• Designed for use on 2000 and later HD models
• Includes 2" O.D. driver, 1", 3/4" and 25 mm I.D. drivers
• Adapters can be changed quickly to accommodate a wide range of bearing combinations
• Durable steel handle and anodized aluminum drivers
• Can be used with a hammer or shop press
• Laser etched adapters for easy identification
• Includes convenient molded tray for storage

Email Tristana@browardmotorsports.com

• manufactured to exact measurements to meet or exceed oem specification
• tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
• cables are individually packed in a poly sleeve with color coded header cards

terminator

• this premium cable features longitudinal wound wire housing embedded in polyurethane with a nylon lining to eliminate spring or compression
• a stainless inner wire resists corrosion  allowing longer, smoother operation
• this is the ultimate cable for precise clutch operation

Email Tristana@browardmotorsports.com

Motion Pro Fork Cap Wrench

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

• High quality blind bearing puller you will be proud to use and own
• Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
• Collets are precision machined for perfect fit and durable performance
• Collets have an innovative new design that improves durability and pulling strength
• Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
• Kit includes high quality slide hammer designed by Motion Pro with excellent weight
• and balance
• Slide hammer and individual collets are also available separately from Motion Pro
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

Dial Gauge

• New valve provides higher flow rate and features larger, ergonomically shaped bleeder button for precise pressure adjustment and ease of use

• Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure

• Liquid glycerin filled gauge gives consistent readings regardless of temperature or elevation
• Pressure range of 0-60 psi for checking sport bike tire
• Liquid filled 2.5 inch dial gauge with protective rubber boot
• Blue anodized 6061 T-6 body with pressure relief valve
• High pressure hose with dual swivels and brass ball type air check

Digital Gauge

• New valve provides higher flow rate and features larger, ergonomically shaped bleeder  button for precise pressure adjustment and ease of use
• High precision, accurate to +/- 0.6 psi, precise digital readout to 0.1 psi
• Continuous pressure reading, no need to reset when activating bleed valve
• Four selectable scales (PSI, BAR, KG-CM², kPa)
• Large easy to read display with backlight for low-light applications
• Billet aluminum air chuck provides tight, leak-free seal to tire valve and is specially designed for reading air pressure
• 15" high-pressure hose with dual swivels and Motion Pro design air chuck
• Two-year limited warranty

Email Tristana@browardmotorsports.com

• Easily removes plastic push pins from body panels found on UTVs, Motorcycles, ATVs, Cars & Trucks    
• Works on all push pins 20 mm diameter and smaller
• Durable, lightweight aluminum construction
• Raised logo on handle provides extra grip
• Small tool size designed for tight spaces
• For use on plastic push pins only

Email Tristana@browardmotorsports.com

• Holds damping rod for inner fork cartridge removal
• Fits damping rod diameters of 10 mm to 14 mm
• 6061-T6 aluminum
• Anodized finish with laser engraving
• Lifetime limited warranty

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

Email Tristana@browardmotorsports.com

• Universal preformed FI line includes 2” of fuel line at 60° and 45° bends, plus additional 4” at 90° bend allows you to cut and make almost any shape
• Includes one 5/16” x 5/16” straight barb fitting Part No. 12-0087
• SAE J30 standard is safe for gasoline, diesel, and oil
• Fits most OEM 5/16” or 8 mm ID applications
• Designed to fit in your travel tool kit
• Temp range -40°C ~ 150°C
• EPA/CARB Certified
• Clamps not included

Email Tristana@browardmotorsports.com

Dial Gauge

• New valve provides higher flow rate and features larger, ergonomically shaped bleeder button for precise pressure adjustment and ease of use

• Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure

• Liquid glycerin filled gauge gives consistent readings regardless of temperature or elevation
• Pressure range of 0-60 psi for checking sport bike tire
• Liquid filled 2.5 inch dial gauge with protective rubber boot
• Blue anodized 6061 T-6 body with pressure relief valve
• High pressure hose with dual swivels and brass ball type air check

Digital Gauge

• New valve provides higher flow rate and features larger, ergonomically shaped bleeder  button for precise pressure adjustment and ease of use
• High precision, accurate to +/- 0.6 psi, precise digital readout to 0.1 psi
• Continuous pressure reading, no need to reset when activating bleed valve
• Four selectable scales (PSI, BAR, KG-CM², kPa)
• Large easy to read display with backlight for low-light applications
• Billet aluminum air chuck provides tight, leak-free seal to tire valve and is specially designed for reading air pressure
• 15" high-pressure hose with dual swivels and Motion Pro design air chuck
• Two-year limited warranty

Email Tristana@browardmotorsports.com

SHOCK SETTER TOOL

• Quickly and easily adjusts rear shock compression and rebound
• Combines high speed and low speed/rebound adjusters into one compact tool
• Portable design allows for convenient track side or trail side adjustments
• Fits common 17mm high speed compression adjusters
• Made from durable stainless steel and anodized 6061-T6 aluminum

Email Tristana@browardmotorsports.com

• One piece molded design made from proprietary high-strength nylon composite
• Super light and impact resistant
• Includes the new Motion Pro aluminum LiteLoc™ rim locknut and beveled washer
• 2.15 weighs only 68 grams (2.4 oz), 1.60 weighs only 35 grams (1.2 oz)
• Unique contoured shape protects inner tube from abrasion and reduces heat
• Unique angled and tapered ribs lock tire securely to rim
• Our testing shows these rim locks are 10 to 20 percent stronger and more impact resistant than cast aluminum rim lock, and only half the weight
• Recommended for use on all off-road motorcycles and any application using low tire pressure
• Patent pending

Email Tristana@browardmotorsports.com

• Updated design of the Motion Pro CR Pro™ throttle
• Die-cast aluminum housing
• Smooth painted black finish
• Stainless steel hardware
• Fits 7/8" (22 mm) bars
• Straight-pull assembly
• Recommended for 34 mm or smaller single-pull carburetors
• Includes nylon throttle tube with grip retaining ring
• Drum Brake Honda CR replacement (pre-84)
• Motion Pro cables available for most models
• Maximum twist 170 degrees / maximum travel 58 mm

Email Tristana@browardmotorsports.com

• Versatile, light and super compact chain tool for adventure touring and long distance trail riding
• 6061 billet aluminum body, complete tool weighs only 230 grams (8 oz)
• Will break 520, 525, and most 530 chains and master links (maximum link width of 20 mm)
• Included steel press plate for removing and installing clip style press-on master link plates
• Innovative dovetail closure provides ease of use and superior strength
• Hardened steel thread insert on body provides strength and durability
• Includes durable cloth pouch for easy transport on your adventure
• Requires use of a 12 mm and 14 mm wrenches (not included)
• Does not rivet master links. 
• We recommend using the Motion Pro PBR Chain Tool PN 08-0470   if you have a rivet style master link
• Patent Pending

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)

Notes:

* Closed course race application only, must use 7/8" handlebars.

** For use with stock throttle bodies/carburetors. Does not include starter/kill switch assembly or wiring, ignition/starter switch required (not included). Order 70-11980 switch assembly unless specific switch is listed for the application.

# For use with stock throttle bodies, stock reel is 33.4mm. The stock throttle housing has an on/off switch, mode switch and starter button. The 70-11980 acc. switch only has an on/off switch and starter button. Contact Motion Pro for a complete list of modifications needed.

† For use with stock throttle bodies, fits BMW S1000RR produced from 09/08 thru 03/12. The Rev2 kit may not be a direct bolt on, contact Motion Pro for a complete list of modifications needed.

‡ Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation.

§ 70-22765 Rev2 throttle kit features throttle cable set 70-21270 that is 3 inches longer than throttle cable 70-21269 included in Rev2 throttle kit 70-21764.

Email Tristana@browardmotorsports.com

Rev3 Throttle Kits

• The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
• Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
• 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
• Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
• Improved throttle stop provides greater strength and durability - Snap together elbows makes it even easier to install and change reels
• Cable boot keeps dirt and dust out for reliable and smooth operation
• REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips (01-2818 and 01-2819) and ODI Lock-On grips
• Billet aluminum inline cable adjusters ease installation and adjustment
• Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
• Upper section of cables use 6 mm housing to provide solid support of adjusters
• Simple to install and maintain
• Patented

Kit includes:

• REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
• Motion Pro REV3™ black vinyl cables specifically designed for your bike
• REV3™ sportbike kits include Motion Pro RoadControl™ grips (01-1131) and REV3™ off-road kits include Motion Pro DirtControl™ II grips (01-2816)
• Four interchangeable round reels: 35mm, 40 mm, 45 mm, 50 mm
• Progressive cam reel - Sportbike kits include road race profile cam reel (orange) and off-road kits include off-road profile cam reel (gray)