• Clean look to match OEM appearance.
• Replaces Roadglide OEM #41700463
• Uses OEM style switches (not included)
• Available in Chrome or Black Finish
• Hydraulic clutch applications

Email Tristana@browardmotorsports.com

• Clean look to match OEM appearance.
• Uses OEM style switches (not included)
• Available in Chrome or Black Finish
• Cable clutch applications
• Except FLTR models

Email Tristana@browardmotorsports.com

• Aerospace grade, heat treated 7075 T6 aluminum construction
• High quality crossbar that provides positive control
• Bead blasted anodized finish for maximum strength and durability
• TPU bar pad for impact protection and durability
• 7/8" clamping diameter
• Durable, laser engraved graphics
• Calibration marks for precise mounting
• Clutch-side knurling for maximum grip adhesion

Email Tristana@browardmotorsports.com

• Aerospace grade, heat treated 7075 T6 aluminum construction
• Shot-peened and anodized finish for maximum strength and durability
• Calibration marks for precise mounting
• Clutch-side knurling for maximum grip adhesion
• Stronger and lighter than conventional aluminum handlebars
• Controls the flex to dissipate shock and impact which reduces rider fatigue
• The molded bar pad provides superior impact protection and features and innovative mounting solution for easy installment and positioning
• 1 1/8" clamping diameter tapers to 7/8"at bar ends
• Handlebar is lighter than the competition; it weighs only 1.4lb
• Durable, laser engraved graphics
• 80mm bore depth to accommodate most handguards

Email Tristana@browardmotorsports.com

• Aerospace grade, heat treated 7075 T6 aluminum construction
• High quality crossbar that provides positive control
• Bead blasted anodized finish for maximum strength and durability
• TPU bar pad for impact protection and durability
• 7/8" clamping diameter
• Durable, laser engraved graphics
• Calibration marks for precise mounting
• Clutch-side knurling for maximum grip adhesion

Email Tristana@browardmotorsports.com

• Aerospace grade, heat treated 7075 T6 aluminum construction
• Shot-peened and anodized finish for maximum strength and durability
• Calibration marks for precise mounting
• Clutch-side knurling for maximum grip adhesion
• Stronger and lighter than conventional aluminum handlebars
• Controls the flex to dissipate shock and impact which reduces rider fatigue
• The molded bar pad provides superior impact protection and features and innovative mounting solution for easy installment and positioning
• 1 1/8" clamping diameter tapers to 7/8"at bar ends
• Handlebar is lighter than the competition; it weighs only 1.4lb
• Durable, laser engraved graphics
• 80mm bore depth to accommodate most handguards

Email Tristana@browardmotorsports.com

• High Quality Carbon Steel
• 7/8" Clamping Diameter
• Tig welded crossbar for strength
• Tough powder coating to withstand abuse
• Protective end caps
• Bar pad included

Email Tristana@browardmotorsports.com

• High Quality Carbon Steel
• 7/8" Clamping Diameter
• Strong nickel coating with anodized finish
• Tig welded crossbar for strength
• Protective end caps
• Bar pad included

Email Tristana@browardmotorsports.com

• High quality carbon steel 1" handlebars
• Chrome plated
• Drilled, not dimpled
• Not Knurled

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• High quality carbon steel handlebars
• 7/8” diameter, available in chrome or black finish as noted

Email Tristana@browardmotorsports.com

• Contoured radial styling with OEM style clamps
• OEM style switches and wiring
• Available in a Chrome or Black finish

Email Tristana@browardmotorsports.com

• Contoured radial styling with OEM style clamps
• Uses OEM style switches and wiring (not included)
• Available in a Chrome or Black finish
• Cable clutch applications 

Email Tristana@browardmotorsports.com

• Perfect for Sportsters or Dynas or choppers with narrow glide front ends
• Available in three heights in either Chrome or Satin Black finish
• Wrist angle is perfect for that chopper style riding position
• Dimpled and drilled
• Non throttle by wire

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• Handlebars are 1 1/4" through the clamping area 
• Dimpled and drilled for internal wiring
• Satin Black or Chrome finish
• These bars go from 1 1/4" to 1" at the grip mount
• Not for Throttle By Wire models

They fit the OEM 1 1/4" riser setup on the following models: '06-Up FXDWG, '08-13 FXDF, '06-13 FLSTF/B, they may be fitted to other models with the use of 1 1/4" risers and top clamp. 

Email Tristana@browardmotorsports.com

• HardDrive 1" Z-bars in the traditional straight format
• Dimpled for 82-23 (Non CVO) applications
• Available in Chrome or Gloss Black
• Bars are Not pre-drilled or Knurled

Email Tristana@browardmotorsports.com

• Our 1" dia Buckhorn Bars are constructed of high quality Steel tubing
• Traditional style and a comfortable ride come along with a deep Chrome finish
• Dimpled for external wiring and knurled for 3 1/2" riser spacing
• Fits most models except 1980-Up Touring models with fairings and 2008-Up models with TBW, non Batwing

Email Tristana@browardmotorsports.com

• HardDrive's FAT Tillers are available in 1-1/4" 
• They are custom cool and bring a comfortable ride
• Made of heavy duty, high quality steel tubing and expertly welded and step-jointed
• Available in Chrome or Satin Black
• Drilled for internal wiring with installed pull-cord for easy wire installation
• Set for 3-1/2" center to center riser mounting
• Not for Springers, Batwings or TBW

Email Tristana@browardmotorsports.com

• HardDrive FAT Drag bars are available in 1-1/4" and  1-1/2" dia.
• They bring a comfortable ride and great FAT looks
• Made of heavy duty, high quality tubing with expertly welded step-joints and are knurled for 3-1/2" riser spacing
• Drilled for Internal Wiring 
• Available in Chrome or Gloss Black
• Will not fit models with TBW
• Not for Springer Models

Email Tristana@browardmotorsports.com

• HardDrive 1 1/4" dia Fat Bars are made of heavy duty high grade Steel tubing
• They bring plenty of attitude with Fat tubing
• Expertly welded step-joints, dimpled and a wiring pull-cord installed for easy wiring installation
• Knurled 3 1/2" riser spacing
• Available in Chrome or  Satin Black
• Fits most models except 1980-Up Touring models with fairings and 2008-Up models with TBW
• Does not fit Springer Models or XL 883/1200C

Email Tristana@browardmotorsports.com

• HardDrive 1" dia Drag Bars are constructed of high quality steel tubing. Comfortable ride and a performance custom look
• Available in Chrome or Satin Black
• Knurled for 3 1/2" riser spacing
• Fits most models except Touring models with fairing and  2008-Up models with TBW
• Not for Springer models
• Replaces OEM# 56558-95 

Email Tristana@browardmotorsports.com

• HardDrive 1 1/4" FAT-Z Bars have plenty of attitude and look great
• Made of heavy duty, high grade steel tubing with expertly welded step-joints, a high quality finish and are knurled for 3 1/2" riser spacing
• Comes with pull cord to make installation easy
• Available in Chrome or Satin Black
• Fits most models except 1980-Up Touring models with fairings and 2008-Up models with TBW non Batwing
• Does not fit Springer models

Email Tristana@browardmotorsports.com

• HardDrive 1" dia Ape Hangers are made of high quality Steel tubing
• Dimpled for external wiring and knurled for 3 1/2" riser spacing
• From 8" to 16" rise height and have a Polished Chrome finish
• Fits most models except 1980-Up Touring models with fairings and 2008-UP models with TBW non batwing

Email Tristana@browardmotorsports.com