Email Tristana@browardmotorsports.com

• Today's Fuel injected bikes with their map switches, launch controls and kill switches do not leave much room for controls or hand guard mounts
• This space saver perch mount kill switch can save you some much needed room by replacing the cap on you clutch perch or brake master cylinder
• Magura Space saver design allows kill switch to mount on Magura clutch master cylinders
• Water resistant rubber sealed cap
• Epoxy sealed internal electronics

Email Tristana@browardmotorsports.com

• Single bolt pivot mount design
• Anodized CNC billet 6061 aluminum resists corrosion
• Water resistant rubber sealed cap
• Epoxy sealed internal electronics
• To install cut the wires to the stock connector and splice to this new switch

Email Tristana@browardmotorsports.com

• The Stealth Slimline series has the same great look of the Stealth series but in a single row 1.5" height lens
• High-intensity Osram LEDs put out remarkable light at a longer distance with more lumens
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving
• Indirect LED technology allows for less wasted light
• 5700K color temperature provides bright white light                          
• Heavy-duty bezel-less aluminum housing for the most rugged conditions
• Includes end mount and slider mounting brackets, wiring harness and switch
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com

• Quick release cap with 3/8" x 24mm stud
• Simple pull of a pin to swap out flags
• Replacement quick release cap with 3/8" x 24mm stud
• Adapter cap tapped for 1/2" x 13mm stud to fit standard flags 
• Made from 6061 aluminum
• Made in the USA

Email Tristana@browardmotorsports.com

• High intensity Osram LEDs put out remarkable light at a longer distance with more lumens
• Stealth series offers a more sleek blacked out look without sacrificing light output
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving
• Indirect LED technology allows for less wasted light6000K color temperature gives off a bright white light that cuts through the darkness                                    
• Heavy-duty bezeless aluminum housing for the most rugged conditions
• Includes end mount and slider mounting brackets, wiring harness and switch
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com

Our adapter plate allows you to mount FM risers and moto style bars to a `15-Up Road Glide (except CVO models) without relocating the gauges. It moves the risers 1.5" towards the rider and 2" up. It can also be used to relocate the same bar setup on M8 Softails to create a more comfortable riding position. Road Glide models will lose the fork lock function and accessory position of the ignition switch when this adapter is installed and holes must be drilled in the gauge shroud (template included).

Email Tristana@browardmotorsports.com

• Can be a replacement for the OEM 
• Use on custom fenders for easy seat installation
• Includes "C" clip

Email Tristana@browardmotorsports.com

• Weld on style 
• Stainless steel
• Available in both Polished and Black

Email Tristana@browardmotorsports.com

• Replaces OEM 65723-85
• Chrome finish
• Sold each.

Email Tristana@browardmotorsports.com

Open Trail has came together with one of the most sought after industry leaders in power sports to offer you our all new Open Trail Strap and Clamp system.Through creative design and stringent testing we have developed a system with many unique features. Performance and ergonomics were considered throughout every step of development. All Clamps feature the highest grade materials, high performance resin coating and stainless steel hardware.The self locking clamp design allows for easy 1-person installation. Simply slip the clamp over your tube and lock in your base, secure using the stainless mounting hardware and you are ready to Mount Up and Move Out™!

Email Tristana@browardmotorsports.com

• Made with heavy duty steel construction
• All mounting hardware included in mount kit 
• Shocks sold each
• Adjustable pre-load 
• Spring rate 300lbs per inch 

Email Tristana@browardmotorsports.com

Dropping weight is one of the most efficient ways of improving lap times on the track. If you have a Yoshimura exhaust system, why not take weight savings to max with this lightweight aluminum muffler bracket?

Email Tristana@browardmotorsports.com

• These new saddle bag support brackets are high quality replacements
• Chrome plated or Black finish
• Sold as a set ( 1 x LH side bracket & 1 x RH side bracket)

Email Tristana@browardmotorsports.com

• Meets or exceeds OEM specifications
• Sold each

Email Tristana@browardmotorsports.com

• These dual gauge mount kits have a steel construction
• Available in chrome or black
• Allows mounting of the Speedo & Tachometer easily
• Comes with backing plates and hardware as shown
• Sold as a kit

Email Tristana@browardmotorsports.com

Open Trail Single Row LED Light Bars                            
                            

• Low draw 5 watt Cree LEDs put out remarkable light without taxing your vehicles charging system    
• Designed for a flat surface mounting location ex. top side of the roof or bumper                        
• IP67 Waterproof Rating                            
• 6000K color temperature gives off a bright white light that cuts through the darkness                            
• Efficient reflector design makes more light usable                            
• Strong aluminum housing has integrated fins to keep lights cool                            
• Impact and scratch resistant Polycarbonate lens material                            
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving                            
• Includes mounting bracket, wiring harness and switch                            
• New slider mounting brackets                         
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)                            

Email Tristana@browardmotorsports.com

• Thicker material than stock saddlebag brackets
• Chrome plated finish
• Right and left side sold separately

Email Tristana@browardmotorsports.com

Listed pricing is for quantity of one even for items that come in pack quantities shown.

Email Tristana@browardmotorsports.com

• Steel side plates
• Mount gas and oil tanks perfectly
• OEM replacement
• Heavy Duty mount has an internal spring

Email Tristana@browardmotorsports.com

• Chrome plated
• Easy install

Email Tristana@browardmotorsports.com

• Chrome finish
• Works great for OEM replacement and custom builds
• Mounts almost anywhere with 5/16" mounting holes

Email Tristana@browardmotorsports.com

• All mounting hardware included
• Includes rubber spacers to isolate license plate vibration
• Give your bike a new look

Email Tristana@browardmotorsports.com

Open Trail Roll Cage Mounts

• A-Pillar (front angled) mount for single LED lights
• Verticle and Horizontal mounts for single LED's, flags, etc.
• Sold individually

Email Tristana@browardmotorsports.com

Open Trail Roll Cage Mounts

• A-Pillar (front angled) mount for single LED lights
• Verticle and Horizontal mounts for single LED's, flags, etc.
• Sold individually

Email Tristana@browardmotorsports.com

Open Trail Roll Cage Mounts

• A-Pillar (front angled) mount for single LED lights
• Verticle and Horizontal mounts for single LED's, flags, etc.
• Sold individually

Email Tristana@browardmotorsports.com

• For use on Open Trail or any other LED light bar with mounting arms that require 6mm bolts
• Easy way to mount Open Trail lights to roll bar
• Comes with clamp and base
• Made in USA
• Sold as a pair

Email Tristana@browardmotorsports.com

• Low draw Cree LEDs put out remarkable light without taxing your vehicles charging system
• IP67 Waterproof Rating
• 6000K color temperature gives off a bright white light that cuts through the darkness
• Efficient reflector design makes more light usable
• Strong aluminum housing has integrated fins to keep lights cool
• Impact and scratch resistant Polycarbonate lens material
• Combo beam uses flood and spot reflectors to give a beam pattern that is superior for night offroad driving
• Includes mounting bracket, wiring harness and switch
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com

• High intensity, efficient Cree LEDs                                           
• Spot reflectors to give a more focused beam pattern to light up at long distances
• Flood reflectors give more usable light over a short distance, great for backup lights, trailers, or work areas
• Low draw LEDs put out remarkable light without taxing your vehicles charging system                                   
• IP67 Waterproof Rating                                
• 6000K color temperature gives off a bright white light that cuts through the darkness                                    
• Strong aluminum housing has integrated fins to keep lights cool                                               
• Includes mounting brackets, wiring harness and switch                                   
• Warranted 15 months against manufacturer defects (Excludes abuse/crash damage)

Email Tristana@browardmotorsports.com