DESCRIPTION:

Long lasting, superior lubrication that resists water and salt spray. Drives out moisture that can cause electrical failures and hard starting. Penetrates deep through rust and corrosion to loosen frozen parts. Starts wet engines

Description:

Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.

By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.

Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxiliary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the spark plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.

Note: Solid tip plug. For use with Sea-Doo 300 Models

Description:
Brisk Multi-Spark Spark Plugs are designed to deliver 3 simultaneous sparks without any modifications to your ignition system. This unique patented design is beneficial for high performance and racing applications, and everyone who is seeking more full and complete combustion cycle as there is no shrouding of the sparks.
By having the Multiple Sparks unshrouded, the multi-spark spark plugs have direct access to the fuel / air mixture which produces a more spontaneous and rapid flame propagation. This improves engine efficiency as there are less imperfectly ignited cycles (reduction in emissions from unburnt fuels/air) which is beneficial for racing and performance as well as a producing an economically friendly product. See our video demonstration for a real life view of how this product works.
Brisk Premium Multi-spark plugs are an entirely new and patented type of high performance spark plug. The spark plug name describes exactly what the spark plug is all about: multiple sparks. The spark plug have no traditional so called "J-gap" ground electrode, instead, there are two auxilary ring shape electrodes bonded to the surface of the ceramic insulator. Since the ring shape electrodes are conductive, they split one very large gap into 3 smaller gaps for the sparks to occur. Since the Multi-spark plug 3 gaps are in series, the spark has to jump three times in order to get from the center electrode to the ground (the spark plug shell), as this is the path of the least resistance.

This means that if your vehicle is equipped with a multi-spark ignition system such as Accel, Crane, Mallory or MSD, you will have 3 times as many sparks on the tip of the sprak plug than your ignition system generate. For example with MSD multi-spark ignition system you will get 9 sparks per every single primary ignition pulse until abut 3,000 RPM when the multi-spark ignition system switch into a single spark mode. But even than you will still get 3 sparks with the Brisk Premium Multi-spark plug, just as you will with a standard OE (original equipment) ignition system in ordinary cars, motorcycles and such.
 

• Protects front hull and panels from dirt, insects and other debris while trailering.
• Simple installation by attaching to trailer and Switch mooring cleats.
• Provides full watercraft coverage when paired with Switch Mooring Cover while trailering.
• Polyurethane coating makes cleaning fast and easy.

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

 

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Honda
• Kawasaki
• SeaDoo
• Suzuki
• Yamaha

Fully synthetic high performance motor oil for PWCs. The special additive package ensures maximum engine performance and ideal wear protection. Guarantees the best possible lubrication, outstanding engine cleanliness and excellent friction values for wet clutches, even at high speeds. Meets or exceeds the requirements and specifications of major manufacturers.

For 4-stroke gasoline PWC engines with or without wet clutches, where an oil according to current product specifications is required or recommended. Safe with catalytic converters and turbochargers. Observe the manufacturers instructions!

 

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Honda
• Kawasaki
• SeaDoo
• Suzuki
• Yamaha

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected.
• Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models.
• Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected.
• Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models.
• Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected. Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models. Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected.
• Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models. Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected. Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models.
• Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected.
• Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover.
• Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops on Cruise and Sport models.
• Includes everything needed for immediate use.

• Heavy-duty, UV-resistant polyester canvas mooring cover keeps Switch interior dry and protected.
• Innovative clip system makes for easy, fast installation, and allows LinQ Lite accessories to remain attached to the rails while cover is in use.
• Interior pole system keeps cover elevated and prevents water pooling on the cover. Air vents at the rear allow increased air circulation.
• Compatible with Switch Bimini tops.
• Includes everything needed for immediate use.

Sea-Doo New OEM Mechanical Reverse Calibrated Actuator, 27800360

Fits all Sea Doo watercraft EXCEPT Spark

The Original Factory oil filter is the best way to ensure quality fit and function. Filters should be replaced with each oil change as specified by the manufacturer. Used in all 900ACE 60hp & 90hp Spark, GTS 90 & GTI 90 models

Fits:

2014-2021

New Replacement OE Oil Filter for Sea-Doo 300 420956744

Features

Yamaha OEM oil Filter

Part Number #5GH-13440-61-00

Supersedes to 5GH-13440-80-00

The Original Factory oil filter is the best way to ensure quality fit and function. Filters should be replaced with each oil change as specified by the manufacturer.

Yamalube now has an oil change kit for the new TR-1 three cylinder watercraft engine.  Kit includes (4) 10W40WV of 32 oz. engine lubricant and (1) oil filter.

We are so confident we craft the highest quality powersports oil in the industry that we will warrant the performance of Yamalube in your new Yamaha vehicle’s or other qualified product’s engine for 20 years or 100,000 miles (5,000 hours of operation if no odometer), whichever comes first.

For: