The Better Way To Experience A Seadoo!

Looking to make your new Seadoo look a little less like your Grandma's ski?

It's time to upgrade to the brand new Worx Steering Kit for the 2020+ GTR & RXTX. This kit greatly improves riding ergonomics, with less strain on your wrists, meaning a much more comfortable ride. 

Constructed from Bulletproof Anodised Billet Aluminium, the steering stem provides much greater strength and durability when compared to the OEM plastic unit which is prone to failure in high stress environments. 

This kit includes everything you need to completely overhaul your steering!

Includes:

• ODI Grips
• ODI Handlebars
• Left Switch Housing
• Right Switch Housing
• Electronic Throttle Lever
• Reverse Lever
• Spiral Wrap
• 6 x Zip Ties

Instructions

Made out 100% marine grade aluminum.

Want to film your jet ski trips and review all the footage of your latest adventures? Trying to find the suitable mount for your GoPro Action Camera is challenging-- especially if you are looking for one for a specific jet ski model. But you are in luck because we have the right GoPro/360 mount just for your 2020-2024 SEADOO RXTX using the Bar Handle shown in the below pictures.

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

The Ruffian MX Grips offer the narrow diamondized pattern that made our Ruffian grips a classic, with an added half-waffle pattern for additional traction.

• 130mm Length
• No Flange
• Narrow Diamondized Surface Pattern
• MX Style Half-Waffle Pattern for Improved Traction
• New Snap Cap End Plugs Included
• Includes New Snap Cap End Plugs

The ultimate traction and control under any conditions! The X-treme grip was designed to provide a more consistent gripping surface under even the most inclement conditions. The aggressive diamond pattern tapers for a more ergonomic feel. The added Diamond Plate pads offer additional traction and padding across the length of the grip.

• 130mm Length
• 3/4 Flange
• Agressive Diamond/Diamond Plate Pattern
• Extra Tacky Surface for More Control
• New Snap Cap End Plugs Included

Sleek, stylish soft-sided thermal insulated bag is perfect for keeping your refreshments cool for up to 48 hours. Waterproof, sealed construction with durable material is easy to clean. Carry handles and removable shoulder strap for easy transport to and from the water. Features outside ID pocket and magnetic top closure for quick access and a sure seal.

Specifications

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing
• Fits 7/8 handlebars allowing you to select the style of bars that suits your own unique riding style
• Allows use of both styles of OTAS sensors
• Black anodized

Description 

WORX Racing  All NEW Billet Anodised iBR (reverse) Electronic actuator housing which utilizes OEM electronic actuators up on the handlebars (no throttle cables required),

- Billet anodized construction

- Utilizes OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iBR

- Clamp-on Handlebar design allows for adjustability of throttle position and angle

Description 

WORX Racing All NEW Billet Anodised Throttle Electronic actuator housing which utilizes OEM electronic actuators up on the handlebars (no throttle cables required),

- Billet anodized construction

- Utilizes OEM electronic actuator which drops into new housing for OEM electronic trigger feel

- Suits all Sea-Doo models with  iTC

- Clamp-on Handlebar design allows for adjustability of throttle position and angle

Description 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand positions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- Also holds Start/stop switch and button

- Will suits Sea-Doo Sparks with optional VTS fitted

- For use with aftermarket handlebars combined with WORX Racing Steering System

Description 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, RXPX, GTX models with new switch panels (LH side)

- Adjustable to suit riding hand postions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Description 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXPX 300 models with new switch panels (RH side WITHOUT cruise)

- Adjustable to suit riding hand positions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Description 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

-Suit 2018+ RXTX, GTX models with new switch panels (RH side with cruise)

- Adjustable to suit riding hand position for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Description 

New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System.

- Adjustable to suit riding hand positions for ultimate control

- OEM switch panel drops straight in (requires NO modifications)  

- For use with aftermarket handlebars combined with WORX Racing Steering System

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware

DOES NOT FIT SPARK Models or New ST3 2018 model steering

NOTE: Grips NOT Included 

Description 

WR06014-ET

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Allows you to use higher quality aftermarket 7/8" diameter handlebars to a bend that suits your riding style.

Description 

WR06014-ET-KIT

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

NEW REVISED DESIGN!

- Includes WORX All NEW Billet anodized Electronic throttle lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

Description 

WR06014-iBR-KIT

NEW REVISED DESIGN!

- Kit includes Steering stem, All controls, Bars and Grips (everything pictured)

Includes WORX All NEW Billet anodized Electronic throttle lever and brake lever housing which utilizes OEM electronic throttle actuator up on the handlebars (no throttle cable required), Start/Stop switch holder, Steering Column and necessary hardware, Handlebars and Grips. Everything included converting your steering.
- Retains all OEM functions.
- Improved ergonomics give you a more comfortable ride with less strain on your wrists with throttle housing angle and position adjustable on the handlebars.
- Constructed from bulletproof Anodised Billet Aluminium for greater strength and durability over the OEM plastic unit which is prone to failure in high-stress environments (racing/ocean riding).
- Comes with Pro Taper Rapter bars and ODI grips for best riding position and ultimate grip

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Designed for racing and can be used for recreational, too
• Black Anodised

GP1800 2017- 2020 | VXR/VXS 15+ | EX SERIES 17 - 2023

Cover plate and hardware included (cover plate for GP/VXR models only)

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware 

NOTE: Grips NOT Included