Description 

Sea-Doo Start/ Stop switch housing

- Solid billet anodized construction

- Utilizes small Sea-Doo Switch panel and late model (thick) red button

- 2 piece bar clamp style for adjustability

- Great for start/stop button on custom skis/ launch control button etc

- Can be used on either side of handlebars

Description 

- Greater stability

- Improved cornering

- Superior handling

- Lets you lean in and ride the boat aggressively without the back sliding out on you

Performance Benefits:

• Better handling when cornering, smoother more controlled turning
• Our sponsons let the boat ride higher in the bow which gives several advantages
• Dryer ride in all conditions
• Higher top speed because the boat rides higher in the water, around 1 1/2 - 2 MPH speed gain
• Adjustability to suit your riding style - down position (top hole) for recreational riding and racing and up position (bottom hole) for enduro rides or races, this position will give you more speed but less aggressive cornering

Description

Fits 1991-2014 Superjets. Also fits Waveblaster 1 & 2. Designed with a deeper scoop for a more aggressive hookup. Ideal for Freestyle, Freeride and Racing.
This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders worldwide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate because the pick-up area is wide and deep. It not only loads the pump but it also allows you to ride hard up to a turn buoy and then when you come off the throttle, the grate acts as a brake to slow you into the turn. For dramatically improved hook up and turning look no further than Worx WR201.

Description 

WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed.

Used by all Pro National and World Lites class Champions 

Description 

This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation.

For the ultimate Freeride Combination, pair this grate with our WR314 Rideplate.

For 2008+ Superjet Owners this is a great option for those wanting a less aggressive grate than our WR228.

Description 

This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.

Description 

This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out. 

The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you slam the boat into the hardest turns with confidence that you will be fully in control. The double concaves in the rear section also give you the extra bight needed to rail through the tightest turns.

Description

 This was the first all-new standup model ski to be released by Kawasaki since 1992. It has a new 800cc engine and is extremely popular for racing and recreational riding. Worx has two different types of ride plate WR310, WR311 and intake grates WR222, WR225 for this boat and these sponsons work well with both combinations.

Our sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come into play when the boat is leaned over into the corners. The sponsons hold the ski on the line in even the hardest turns and make getting those really tight corners to look easy.

Description 

Deeply scooped grate for better hook up. Perfectly matched to enable easy installation.
The Worx Intake Grate is a must for anyone wanting to get the best from their new SX-R. In testing, we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate.
The WR222 gives the boat the pump loading it needs by holding the boat on the water and keeping the pump driving in even the roughest water and in the surf. The two bars running the full length of the boat hang down the full legal IJSBA limit of 12mm (1/2") stopping the back from sliding out, the center blade of the grate does most of the work in the straights and the side wings come into play in the corners to keep the pump fully loaded and driving.

Description 

This intake grate is a must for anyone wanting to get the best from their SX-R. With the OEM grate, the boat loses hook-up in anything but flat calm water.
If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
The WR225 has twin central pickup vanes as well as the proven Worx side wing which is positioned midway between the central vanes. this grate also has a wider and deeper pickup area at the back, the combined effect is more efficient pump loading in all water conditions and better hook up and drives out of the turns. This new generation intake grate together with the totally new shape WR311 ride plate is an awesome addition and will benefit all riders from beginner to pro.

Description 

-160 Deg (ºF) thermostat a direct drop-in replacement for OEM unit in Sea-Doo 4-tec models

- Lowers engine temps up to 30 deg (ºF)

- A must for any modified Sea-Doo engine that retains OEM cooling system operating under high load or in Hotter climates

Description 

Allows for easy installation of extra cooling lines.
1/2 inch.

Description 

These boats hook up pretty good in the calm but really benefit from our intake grate in choppy to rough water, the Worx grate will not cost you any top speed in the calm and will give you heaps better hook up and drive in rough water and around the track for closed course racing. Our unique design ensures the back of the boat does not slide out and that the pump stays fully loaded to combat cavitation. The pick up point at the rear of the intake grate has also been shifted forward to improve rough water hook up. 

Description 

Greater control and turning stability
Enhanced hook up/ reduces cavitation
Improved handling/drive in rough water conditions

WORX Racing Components performance exhaust allows removal of restrictive STD exhaust baffle for increased performance and great exhaust note. Our Billet anodized rear exhaust outlet gives your ski a great performance look.

• Increased throttle response through the rpm range
• Lightweight molded silicone hose
• Billet anodize rear Exhaust outlet
• Easy install with all hardware provided in the kit
• Suits 2 seater style sparks only (DOES NOT FIT 3 SEATER MODELS)
• WORX WR04008 will suit 3 seater Spark models

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Designed for racing and can be used for recreational, too
• Black Anodised

GP1800 2017- 2020 | VXR/VXS 15+ | EX SERIES 17 - 2023

Cover plate and hardware included (cover plate for GP/VXR models only)

Description 

Pump Seal Kit to suit Intake Grate WR244.

Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.

Description 

Billet anodized construction

Allows fitment of 130mm ODI lock grips

Easy install

Billet endcap design to prevent grip sliding off if lock clamp fails

Included hardware 

NOTE: Grips NOT Included 

Description 

• Our new Yamaha Engine Block Cooling plate allows for up to 3 fittings to be fitted for maximum water flow into you Yamaha 1.8 engine block. Injection points target know engine ‘Hot Spot” and directs initial cooling around No#2 cylinder which is common for detonation and overheating in high boost applications.
• Billet anodized construction allowing 1,2 or 3 fittings to be installed
• Fits all 1.8 Yamaha engines (may require o-ring for early models)
• Allows for maximum cooling to the engine under high boost
• Race proved in a closed course and endurance

 Description 

The WORX Racing Components Yamaha Intercooler kit features a New High Flow High capacity intercooler unit capable of handling up to 500 HP!!! A huge internal core almost twice the size of the inefficient OEM cooler allow maximum airflow for any high boost application allowing for increased RPM and dramatically lowering intake air temperatures up to 22C/72F degrees cooler than OEM unit.  The upright element design in which water flows from Bottom of the Intercooler to the top allows an extremely efficient heat transfer allowing more cooler, denser air to enter the engine for increased HP throughout the entire RPM range which can add an extra 45+HP to your watercraft in certain applications.

The WORX Racing Components Intercooler Kit comes complete with removable adjustable Blow off Valve (included), Formed silicone hoses to allow easy access and fitment, all necessary mounting hardware and brackets to mount cooler securely. Also included is complete ‘Cooling Upgrade Kit’ which allows an extra dedicated water cooling line to the Intercooler from the Jet unit and an additional engine block cooling plate to add more water to the engine block to help decrease core engine temps. 

Key Features: 

New Anodised core!!!!

• Huge internal core element for increased airflow and denser air
• Extremely lower air intake temps over OEM cooler
• Huge HP gains up to 45+ Horsepower in certain applications
• Removable bracket, silicone hoses, and necessary hardware all INCLUDED for easy install
• Upright element and water flow for increased heat transfer and efficiency
• Upright mounting allows water to completely drain from the unit after use
• Blow off Valve INCLUDED in the kit to help supercharger reliability and performance
• Complete Independent Intercooler cooling kit upgrade for lower air temps
• Note* May required adjustment of reverse cable mounting for early model FX 08-11

WR01007 YAMAHA 1.8L INTERCOOLER KIT INSTRUCTIONS

These pump wedges are precision designed to elevate the nose of your ski. The higher nose ride height reduces drag to give your ski an additional top speed of 1-3km/h. Allowing for a dryer ride, this simple upgrade is fast and easy to install and is a cost effective way to improve your top speed and handling!

• 2 DEG Billet anodized pump wedge
• Promotes bow lift to increase top speed from 1 to 2 mph
• Higher nose ride height allows for dryer ride
• Cost effective upgrade for better handling and top speed
• Fast and easy install

Description 

Billet Anodized Construction

Replaces expensive OEM rubber part which can fail and lead to boost leaks on S/C models

Comes with all hardware, gasket, and O-Rings for installation

Suits all Yamaha 1.8 Waverunners

Description 

*Suits all 1.8 Naturally aspirated engines 

Allows for maximum Air Flow to your engine

* Increased acceleration and overall RPM's

* Race proven design a must for any Modified/ Race watercraft

* Engine Breather Filter also provided in the kit

• Our cost-effective design BOV will greatly improve supercharger clutch life in your Yamaha 1.8 engine. Kit includes a High Strength silicone hose that incorporates a Billet lightweight “Blow off Valve’, necessary vacuum lines and fittings for install.
• Easy install to OEM location
• Lightweight billet construction less load on the hose to reduce fatigue and tearing
• Easy to disassemble for cleaning and maintenance
• Cost effective upgrade for stock or modified skis

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Description 

Billet anodized fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.

Description 

Allows Removal of restrictive OEM airbox for maximum Air Flow to your engine

Increased acceleration and overall RPM's

Race proven design a must for any Modified/ Race watercraft

Full hardware and bracket supplied to mount electrics and remove the bulky air box

Engine Breather Filter also provided in the kit

Description 

Designed not just for cutting edge performance but killer style! Best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalize your watercraft to your own unique riding style! 

Includes backing rails and all necessary hardware.

Product benefits include:

Greater cornering ability and more straight line stability
Adjustable fin and backing rail to suit riding style
Easy mount to OEM holes
IJSBA Legal in all classes
Race proven performance

Allows removal of restrictive sound suppression baffles in the exhaust.

This part requires no drilling of holes by utilizing the OEM outlet in the pump tunnel. No modification of OEM hoses is needed so the ski can be returned to stock. The billet anodized outlet fits directly into OEM location.

This is a must for any modified personal watercraft.

Description 

• In the tank, replacement increases fuel pressure approx 10psi
• Cost effective alternative to External fuel regulator
• Ideal for Low boost applications and reflashed/ aftermarket ECU

• Constructed from Marine Grade 6061 Aluminum for superior strength
• Retains original throttle/steering sensors
• Designed for racing and can be used for recreational, too
• Fits 7/8 handlebars allowing you to select the style of bars that suit your own unique riding style
• Black anodized
• Comes with billet cover plates for a sleek design look

This steering stem will fit 2008-2011 FX but the cover plate will need modification to fit these models

Description 

This complete kit includes (10) Washers, (10) Studs and (10) Nuts. Constructed from premium 8740 alloy our Stud Kit will provide more accurate and consistent torque loading.

A must have for any engine re-build or performance modifications!

Kit includes 10 x stud/nut/washer. Picture for illustration purpose only

Description 

Yamaha Dual fitting pump cooling plate kit. Billet anodized plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. A must for High horsepower applications.

BRASS FITTINGS NOT INCLUDED.

Our 2008+ Yamaha GP1800 FX, FZ & 2015+ VXR/VXS rear exhaust kit will eliminate any exhaust restriction, increase engine performance and give your Ski the “This means business look” with the Huge 3 inch Billet anodized outlet.

Molded Black silicone hose for easy install
Billet anodized black 3 inch exhaust outlet
Billet anodized block off plate
Eliminates restrictive sound suppression baffles
Silicone hose reduces exhaust resonance and droning
A must for High horsepower/ Race craft

Click here to download Instructions

• Replaces the restrictive mesh element in the intake manifold.
• It increases air flow to the engine, maximizing horsepower.
• Constructed from billet for extra durability and strength
• Tapered design to allow more air flow
• Suits all Supercharger models and all 13+ N/A Models
• DOES NOT SUIT NON SUPERCHARGED MODELS 2012 AND EARILER
• Not required in 18+ Plastic Intake manifolds models

Description 

Larger openings for increased water flow into the engine for lower engine temps

Suits any late model 155mm jet unit

Description 

Includes all bearing and plates that are not available to buy separately OEM

SVHO back plate allows the use of SVHO wheels in SHO chargers if front housing is modified.

New thrust plate, bearing and rings to suit OEM and aftermarket shafts

Service kit for worn or failed chargers

NOTE: WORX has thoroughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessive wear to housings where shaft bearings locate are non-repairable. Service Kit is designed to replace old OEM components that have excessive wear or have failed. 

Description 

Benefits include:

- Proudly designed in conjunction with Ross Champion

- Suitable for Freeride and Freestyle riding

- D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tailwhips and aerial moves

Please note we do NOT recommend this plate for racing or high-speed applications where top speed stability is needed. This plate will NOT fit the 1993-2007 Super Jet—for this model WORX offers the WR315.

Description 

Larger openings for increased water flow into the engine for lower engine temps

Suits any late model 160mm jet unit

Fits 2015+ Yamaha VXR, FX SVHO & 2017+ Yamahas

Increases trim range to bring the nose of your ski higher and increase speed!

Note: Only Suits Yamaha Models WITH RiDE 

Click Here To Download WR06021 Instructions

The Better Way To Experience A Seadoo!

You're looking to give your ski a nice tone while not sounding obnoxious?

It's time to upgrade to the brand new Worx Rear Exhaust Kit for the 2020+ GTR & 2018+ RXTX. This kit greatly improves the tone of your ski whilst also providing a slight increase in performance.

Constructed from Bulletproof Anodized Billet Aluminum, the Exhaust outlet provides a clean yet subtle look to the rear of the ski, instantly recognizable with the Worx logo from any position. 

This kit includes everything you need to get your ski sounding grunty and smooth!

Includes:

• Exhaust Outlet
  
• Silicon Hose
  
• Retainer Ring
  
• M6 x 30mm Bolts

Instructions

• Bracket for GP AIR FILTER "(WR04020-GP)".
• Converts WR04020-FX to WR04020-GP. 

Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR564-I Sponsons.

Made for Seadoo 2020 GTI, GTS & GTR models, these sponsons have been specifically designed to improve the handling performance of your Seadoo ski. Initial testing found the GTR and GTIs unreliable in straight line handling and had a tendency to chine walk. The new sponsons directly combat that and reduce the need for constant steering adjustments when travelling in a straight line.

With included spacers and 4 position adjustable paddles, and optional spacers, you're able to select from 8 different positions to tune in the lean-in-handling characteristics of your jetski, making your ski's handling more or less aggressive!

All Worx Sponsons are designed and manufactured in our Australian warehouse on the Gold Coast, so when you buy Worx Sponsons, you can be sure that you're supporting an Australian owned business. 

Features:

• Improved direct response in cornering
• More predictable handling
• Greater straight line stability
• Made in Australia

Includes:

• 2 x Backing Rails
• 2 x Adjustable Paddles
• 2 x Spacers
• All Fasteners Needed

Unleash the full potential of your ride with a user-friendly gauge interface, effortlessly connecting via a simple plug-in system. This module includes all necessary installation hardware for a seamless setup. For specific models, enjoy features like speed/RPM display advancements, launch mode control, expanded VTS range, lap timer, fuel data, and engine temperature monitoring, offering a thrilling experience on the water. Let the Sea-Doo X Package Module elevate your aquatic escapades to new heights.User-friendly interface on gauge.Simple plug-in connection.Includes hardware necessary for installation.Note: Harness (278002569) and 3 amps. fuse (710001008) are required to install on 2011 to 2017 modelsFor GTX, RXT and WAKE PRO (2018 and up), GTI, GTS, GTR and WAKE 155 (2020 and up) the features are:Average and top speed/RPM display unlocks launch mode control and the complete VTS range (50% more range)For GTI, GTS, GTR and WAKE 155 (2017-2019) the features are: Lap timer, fuel time and distance to "empty", average and top speed/RPM display and engine temperature.SpecificationsCalifornia Prop 65WarningInstallation Instructions295100757 Installation Instructions

Features

Features

Features

Features

Features

Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits.

• Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings
• For Custom ‘design yourself’ Cooling kits
• A must for High horsepower applications.

New 27-Sprag Yamaha Genuine OEM replacement supercharger clutch for all Yamaha 1.8L Supercharged engines features larger, heavy-duty sprag for greater durability. Includes low-profile, button-head bolts (2) for cam chain guide. Backwards compatible to 6ET-17800-10-00.

2008-2012 engines require updated drive gear 99999-04107-00. All require new OEM oil pump assembly gasket (part# 6S5-13563-00-00).

100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble-free use. Directly replaces OEM part# 6ET-51312-00-00.

2008-2014 will need to use the updated 160mm Impeller

Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.

FITMENT:

Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.

FITMENT:

Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.

Fitment:

Because your WaveRunner personal watercraft is such an important investment, you want to keep it looking its best. Yamaha‘s WaveRunner covers are designed to help protect your watercraft‘s appearance. Each cover features superior construction and materials to help provide long life as well as a custom fit. Attractive matching colors and graphics provide a stylish accent. Our covers are constructed of ultra-durable Sur Last® fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water-repellent, UV, mildew, and rot resistant. Features include Vacu-Hold® design, which creates a vacuum inside the cover during transit to draw the cover down snugly to the WaveRunner. Benefits include reduced air-induced stress on the seams, and less aerodynamic drag.

Fitment: