Ruffian Watercraft grips are designed for optimal control in wet conditions. The grip's narrow diamonized surface pattern provides an excellent gripping system and the Lock-On design offers 100% slip-free performance. Guaranteed.

PRODUCT FEATURES:

• 130mm Length
• 7/8" (22mm) Inner Diameter
• Large Raised Pads and Deep Grooves
• Knurled Surface Pattern for Better Traction
• No Flange
• 100% Slip-Free Performance
• Includes new Snap Cap End Plugs

Fitment

• Sea-Doo

Patented Lock-On Grip system uses four aluminum Lock Jaw Clamps (two on either grip) to lock your grips onto the bars.  They can be removed or installed in just a few seconds without using any glues or ties and without destroying your grips each time. Simply snap the aluminum Lock Law Clamp onto the bars on either end of the grip. Slide the grip to the desired position on the handlebars and lock them into place by tightening the allen bolts in each clamps. If desired, slip the Bar End Plugs over the outer Lock Jaw Clamps and secure by turning the screw clockwise.

Email Tristana@browardmotorsports.com

There are some Motocross and Off-Road bikes that have a different type of throttle cam set-up that inhibits us from providing a snap-cam lock-on grip set for.  Therefore, we have created a simpler way to lock-on your gripset that can fit any 7/8 style of handlebar with twist-throttle.

Email Tristana@browardmotorsports.com

• Full-Waffle design creates a larger gripping area perfect for those who prefer a larger diameter grip
• Large Overall Diameter
• Medium Compound
• 360 Degree Waffle Pattern

Email Tristana@browardmotorsports.com

• Full-Waffle design creates a larger gripping area perfect for those who prefer a larger diameter grip
• Large Overall Diameter
• Medium Compound
• 360 Degree Waffle Pattern

Email Tristana@browardmotorsports.com

• Full-Waffle design creates a larger gripping area perfect for those who prefer a larger diameter grip
• Large Overall Diameter
• Medium Compound
• 360 Degree Waffle Pattern

Email Tristana@browardmotorsports.com

VANS® V-TWIN Lock-On GRIP System

• 100% Slip-Free Performance Guaranteed
• In-molded throttle tube with integrated application specific throttle actuation
• Billet aluminum Lock-On™ style clutch side clamp eliminates the need for grip glue or safety set-screws, providing simple installation and removal.
• T15 Torx bolts provide extra secure clamping for solid, twist-free mounting
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• 130mm Overall Grip w/Flange Length
• Made in the U.S.A.

Email Tristana@browardmotorsports.com

VANS® V-TWIN Lock-On GRIP System

• 100% Slip-Free Performance Guaranteed
• In-molded throttle tube with integrated application specific throttle actuation
• Billet aluminum Lock-On™ style clutch side clamp eliminates the need for grip glue or safety set-screws, providing simple installation and removal.
• T15 Torx bolts provide extra secure clamping for solid, twist-free mounting
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• 130mm Overall Grip w/Flange Length
• Made in the U.S.A.

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO and Tracker Handlebars; 1” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• 1" diameter throughout direct replacement for OEM
• 7075-T6 Alloy for improved strength
• Shot-peened and hard Anodized Black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

Taper Bar Pads

• High density foam to reduce rider injury
• Velcro fastening for secure fit
• LENGTH:  7.5" (190mm) WIDTH:  3.5" (95mm)
• Designed to fit most styles of oversize Handlebars
• Available in multiple color options

ATV Race Oversized Bar Mount Pad

• Designed to fit ATV modeled aftermarket/oversized Handlebar Mounts
• Extra Deep Pocket for inclusion of aftermarket steer stem/bar mounts
• High density, lightweight EVA Foam Pad to reduce rider injury
• ODI Logos integrated into Laser Cut End Caps for race look
• Reverse printed clear ODI Branded cover with velcro fastenings for secure fit
• LENGTH:  6.5" (168mm) WIDTH:  3.5" (88mm) HEIGHT:  3" (74mm)

Email Tristana@browardmotorsports.com

Ruffian Indian Lock-On Grips

• Moto inspired grip designed for performance 
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

Ruffian V-Twin Lock-On Grips

• Moto inspired grip designed for performance V-Twin
• Legendary RUFFIAN Full Knurl Diamond Pattern
• Thin profile delivers amazing control, feedback and traction!
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• In-molded throttle tube with integrated application specific throttle actuation.
• Billet Aluminum Lock-On style clutch-side clamp provides simple installation and removal
• Made in the USA

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

• Designed specifically to improve bar mount protection on Mini MX Racebikes
• Great for Freestyle Riders seeking more leg room between the bars
• Velcro fastening for secure fit on handlebars without Crossbar
• High-density foam sized appropriate to reduce rider injury
• SIZE:  5.75" X 3.125" (148x79mm)

DESIGNED TO FIT

• KTM 50SX, 65SX & SX-E2/3/5 Models
• GAS GAS MC50, MC65, MC-E2/3/5 Models
• HUSQVARNA TC50, MC65 & EE-2/3/5 Models
• YAMAHA YZ65 & 85 Models
• Handlebars without Crossbar

Email Tristana@browardmotorsports.com

NOMAD Lock-On Gripset developed with w/D30 Materials

For more than 40 years ODI has been dedicated to pushing the limits of technology to improve your ride and control. D3O® Protection has a long history of innovative protection against vibration and impact in a wide range of industries. So, when the D3O® material science and innovation lab reached out to find a home for their new innovative GRIP™ compound we were excited about the possibilities. We immediately set out to build a grip that could minimize vibration and maximize impact dissipation.

We are proud to announce the product of this partnership - the new NOMAD Off-Road Grip. Meticulously engineered padding coupled with a medium diameter grip with built in finger-traction points enabling you to  hold on with less energy and harness the benefits of the D3O® GRIP™ material, removing shock and vibration so you can focus more on your ride.

PRODUCT FEATURES:

• EXCLUSIVE D3O® GRIP MATERIAL OFFERS 2X MORE VIBRATION DAMPING
• Evenly spaced Mini-Pads provide effective shock absorption & cushion
• 3-Bar finger-traction delivering effective control at speed
• Reinforced end caps offer excellent durability for rocks and trees.
• Medium 31.5mm outside diameter
• Available in 6 different colors to match your ride

NOMAD – In pursuit of the ultimate destination

Email Tristana@browardmotorsports.com

There are some Motocross and Off-Road bikes that have a different type of throttle cam set-up that inhibits us from providing a snap-cam to fit the Lock-On™ grip set to that bike. Therefore, we have created a simpler way to lock-on your grip set that can fit any 7/8 style of handlebar with twist-throttle.

Email Tristana@browardmotorsports.com

Designed to fit Micro-Handlebars, this is the ultimate Mini-Motocross grip for control and traction!

Email Tristana@browardmotorsports.com

Designed to mount to the front of any motocross grip for added control in WET/MUDDY conditions. A necessity for those pouring down, rainy days at the track to enable mechanical traction between your already installed gripset and the inside of your 1st row of knuckles. Each Mud Knuckle is injection molded in-house at ODI and includes 8 Safety-Wire Slots to perfectly secure to the front side of your grips. Improves traction in extremely wet and/or muddy conditions. A must for any toolbox

Email Tristana@browardmotorsports.com

Planning on laying down some rubber and wheelieing the entire interstate, don’t think twice without adding some extra burliness to your V-TWIN Moto Bars! The ODI V-TWIN MOTO Crossbar is now available for all you hoodlums who want to ride your Dyna or Softail like a Motocross Bike! Developed to add strength and stiffness to the V-TWIN Moto Bars.

Email Tristana@browardmotorsports.com

PRODUCT FEATURES:

• Provide extra durability against grip blowout
• Slightly harder compound designed to match articulation points of your hands for added control
• Version 2.1 Lock-On System
• Molded over the aluminum endcap, the end provides durability but will not gouge.
• Soft compound with dual knurl pattern for improved control in all conditions
• Provides more comfort for those who ride in the inside or outside of the grip
• 135MM Overall Length

Email Tristana@browardmotorsports.com

• Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort.
• Soft Pro Compound provides excellent shock absorption.
• Resesigned surface pattern for improved traction and vibration dampening.
• Redesigned Ends provide an improved feel.
• Provide extra durability against grip blowout.
• Thin ribs add control without a bulky feel.
• Uses our race-proven Version 2.1 Lock-On system.
• Molded over the aluminum endcap, the end provides durability but will not gouge
• Optional Stainless Steel bolt kit available for added corrosion resistance

Email Tristana@browardmotorsports.com

PRODUCT FEATURES:

• Precision Engraved Pattern For Optimal Balance Between Feedback and Control
• Inverted Finger Cutouts Providing Extra Grip Where its Needed
• SINGLE CLAMP - Version 2.1 Lock-On System
• Louvered Inside Palm Section for Added Cushion on Inside of Palm
• Carbon Fiber Reinforced Ends Help Prevent Grip Blowout
• Optional Stainless Steel bolt set available for added corrosion resistance

Email Tristana@browardmotorsports.com

PRODUCT FEATURES:

• Legendary Ruffian Diamondized Pattern
• Optimal Feedback and Control
• SINGLE CLAMP - Version 2.1 Lock-On System
• Proprietary ODI Soft Compound Material
• Hand Friendly Soft Ends - Reinforced for Added Durability
• 30MM Slim Diameter

XL PRODUCT FEATURES:

• Extra Large Ruffian Diamondized Pattern
• 32MM Medium Diameter

Email Tristana@browardmotorsports.com

PRODUCT FEATURES:

• Diamondized pattern for optimal traction
• Ultra thin profile (29.5mm OD)
• NEW smaller flange 
• v2.1 Lock-On Grip System = 100% Slip Free performance
• Soft reinforced ends
• 110mm Full Length Grip

Email Tristana@browardmotorsports.com

Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new Vans V2 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love.

Email Tristana@browardmotorsports.com

The ultimate Motocross grip for control and traction!

Email Tristana@browardmotorsports.com

Designed and tested by multiple time world cup DH Champion Aaron Gwin to meet the rigorous demands of world class downhill racing while also improving aero performance and the overall appearance of the bike

Email Tristana@browardmotorsports.com

• Custom machined for light-weight
• Chamfered clamp surface reduces handlebar stress on impact
• Made from sturdy 6061 grade alloy for improved strength and durability
• Designed to fit both standard and rubber mounted triple-clamps  found on Honda and Kawasaki Motocross and Off-Road Motorcycles

• Includes the following mounting hardware:

          o QTY X 2 M12-70mm long chromoly hex-head bolts

          o QTY X 2 M12-50mm long chromoly hex-head bolts

          o QTY X 2 lock washers & nylon lock nuts.

Email Tristana@browardmotorsports.com

NO GRIP – NO GLORY! The 5-Time National Motocross and Supercross champion has outdone himself again. Redeveloping the all time favorite to make it even better and produced to give you an even more amazing riding experience

Email Tristana@browardmotorsports.com

• 100% Slip-Free Performance Guaranteed
• In-molded throttle tube with integrated application specific throttle actuation
• Billet aluminum Lock-On™ style clutch side clamp eliminates the need for grip glue or safety set-screws, providing simple installation and removal.
• T15 Torx bolts provide extra secure clamping for solid, twist-free mounting
• Proprietary Medium-Compound durometer improves overall comfort and durability.
• 130mm Overall Grip w/Flange Length
• Made in the U.S.A.
• Designed Specifically for 1” Handlebar, Throttle By Wire

Email Tristana@browardmotorsports.com

Man, you need Vans®!  Two Southern California originals have teamed up to create a modern-day classic design for your V-Twin Motorcycle.  Designed in-house at ODI, the New VANS V-Twin Lock-On Grip System feature the classic Vans® waffle sole pattern built to deliver you an amazing riding experience.  Built into a medium diameter grip that provides amazing palm traction while delivering extra vibration dampening.  Each pair of grips are constructed in-house at ODI using proprietary grip compounds for a consistent feel that provides exceptional control in all conditions.  Proudly made in the USA by ODI.

Email Tristana@browardmotorsports.com

Man, you need Vans®!  Two Southern California originals have teamed up to create a modern-day classic design for your V-Twin Motorcycle.  Designed in-house at ODI, the New VANS V-Twin Lock-On Grip System feature the classic Vans® waffle sole pattern built to deliver you an amazing riding experience.  Built into a medium diameter grip that provides amazing palm traction while delivering extra vibration dampening.  Each pair of grips are constructed in-house at ODI using proprietary grip compounds for a consistent feel that provides exceptional control in all conditions.  Proudly made in the USA by ODI.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

Ruffian ATV Lock-On grip feature an ultra narrow diamondized grip pattern for optimal traction and control. As part of our patented Lock-On Grip System™, they also feature easy, no-hassle installation and guaranteed 100% slip-free performance.

Email Tristana@browardmotorsports.com

ROGUE ATV LOCK-ON GRIPS (125MM)

Chunky, oversized grip provides extra shock absorption and improved control! 

• New 125mm Length same amazing chunky 33.5mm oversized profile
• Larger grip diameter delivers extra padding, Rugged surface pattern for better traction
• Extra-large raised pads provide shock absorption with deep grooves to channel away dirt and debris
• Molded inner 1^st pass for easy, knock-out-ends for full-wrap handguards
• Preinstalled ODI V2.1 Lock-Jaw Clamps with screws

Patented Lock-On Grip System™ design delivers easy installation and ensures 100% slip free performance.

RUFFIAN ATV LOCK-ON GRIPS (125MM)

Low-profile grip delivering exceptional control designed specifically for racing.

• New 125mm Length same amazing low profile 29.5mm diameter for ultimate feedback.
• Full Diamondized pattern provides slim profile and excellent traction
• Exclusive 3/4 flange design protect hands and allows access to thumb-throttle
• Molded inner 1^st pass for easy, knock-out-ends for full-wrap handguards
• Preinstalled ODI V2.1 Lock-Jaw Clamps with screws

Patented Lock-On Grip System™ design delivers easy installation and ensures 100% slip free performance.

Email Tristana@browardmotorsports.com

• Adapts 7/8” Handlebar Mounts to 1-1/8” Oversized Bars
• Provides 20mm Rise from stock handlebar height
• Made from sturdy 6061 grade alloy for improved strength and durability
• Chamfered clamp surface reduces handlebar stress on heavy impacts
• Developed in the USA

Email Tristana@browardmotorsports.com

• Moto-Inspired grip system specifically designed for your performance V-Twin
• Full-Waffle Moto-Pattern reduces vibration transfer to your hands and provides improved grip in all conditions
• Heavily knurled base-pattern delivers solid traction and control
• Proprietary Medium-Compound Materials which provides excellent durability and comfort
• Billet-aluminum clutch-side clamp eliminates the need for set-screws or grip-glue while ensuring 100% slip-free performance
• T15 Torx bolts included, enabling higher torque levels for solid, twist-free mounting
• Proudly made in the USA.

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO or Tracker Handlebars; 1-1/8” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• High-strength seamless double-butted 2014-T6 alloy
• Shot-peened and hard anodized black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Oversized 1-1/8” Clamp Diameter improves Bar/Clamp Grip (requires "oversized" 1-1/8” handlebar mounts or Risers)
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO and Tracker Handlebars; 1” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• 1" diameter throughout direct replacement for OEM
• 7075-T6 Alloy for improved strength
• Shot-peened and hard Anodized Black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO and Tracker Handlebars; 1” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• 1" diameter throughout direct replacement for OEM
• 7075-T6 Alloy for improved strength
• Shot-peened and hard Anodized Black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO and Tracker Handlebars; 1” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• 1" diameter throughout direct replacement for OEM
• 7075-T6 Alloy for improved strength
• Shot-peened and hard Anodized Black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

ODI V-Twin MOTO and Tracker Handlebars; 1” Mount to 1” Controls & 1" Bars:

• ODI Motocross Technology in a V-Twin Handlebar
• 1" diameter throughout direct replacement for OEM
• 7075-T6 Alloy for improved strength
• Shot-peened and hard Anodized Black for improved durability
• Slotted for Internal Wiring and notched for Throttle-by-Wire
• Knurled clutch slide for improved adhesion with use of Slip-On Moto Grips
• ODI Subtle Placed Logos

Email Tristana@browardmotorsports.com

ROGUE MX "SINGLE PLY" GRIP

• Features extra-large raised pads delivering excellent shock absorption and control!          
• Larger grip diameter provides extra padding
• Deep grooves to channel away dirt and debris
• Rugged surface pattern for better traction in all conditions

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

7075 Aluminum Alloy 7/8" Handlebars

• The 7/8" bar is designed for riders looking for a stock replacement or feel.
• Constructed of 7075 alloy for strength
• Clamped cross brace for support
• Includes bar pad

PW50 HANDLEBAR KIT

• 3/4" (19mm) Diameter to match OEM sizing
• Constructed of durable 7075 heat treated Alloy
• Solid ODI Crossbar for improved strength

INCLUDES:

• 3/4" (19mm) Race Handlebar, SPEC: 620w/84h/65r/145c/65s/160controls
• Billet Rear Brake Perch with Rotational Clamp designed for use with OEM Lever
• Billet Aluminum Bar Mounts  & SX8 Eva High-density Handlebar Pad

ODI RISER KIT:

• NOT INCLUDED In the PEEWEE Upgrade Kit. Riser Kit is Sold Separately
• Designed as a “Drop-In” Bolt style, for ease of replacement in case of crash damage
• NOTE: Alternate Bolts May Be Necessary if Used with other Handlebar Mounts

Email Tristana@browardmotorsports.com

The Podium Flight MX Handlebars are the latest in the development of our MX handlebar technology. With our own tubing profile and design we've created a non-braced handlebar that has already proven worthy of race wins.  Focusing more on racers and those riders looking for the perfect balance between strength and style the Podium Flight has been vigorously tested by top racers.

• Constructed of high-strength seamless double-butted 2014-T6 alloy
• Oversized 1-1/8” Clamp Diameter improves Bar/Clamp Grip (requires "oversized" triple clamps or bar mounts)
• Laser accurate bar alignment grid
• Just enough flex to dissipate shock and reduce rider fatigue
• Includes injection-molded high-density ODI foam bar pad

Email Tristana@browardmotorsports.com